一种多接口多信道VANET动态信道分配算法研究

为了合理地实现多接口多信道车载自组织网络（VANET）车辆节点间通信信道的动态分配,提出了一种基于通信双方车辆节点信道切换队列的动态信道分配算法。定义了车辆节点的射频接口状态,给出了信道的性能因子以及信道切换队列的生成方法,通过综合考虑通信双方车辆节点的射频接口状态和信道切换队列,快速自主地建立通信链路,从而解决了信道公平接入和分配不合理的问题。通过软件仿真比较可以看出,该算法实现了信道的动态分配,减小了平均端到端时延,增加了网络平均吞吐量,显著提高了多接口多信道VANET的网络性能。     

基于MPLS的VPN互访技术

针对VPN互访问题,根据IPSec-VPN互访方法的不足,提出动态MPLS-VPN方法.利用随机分配的标签,在需要互访的不同VPN网络节点之间构建MPLS通道,利用互访规则集检验节点的连接申请,根据过滤规则控制数据包的传输,通过设定传输时长限制节点互访的时间,实现VPN之间接节点、按方向、按时间的细粒度互访控制,确保数据传输的安全性和高效性.给出动态MPLS-VPN方法实现互访的步骤,对方法进行分析比较.     

Simultaneous measurement of gas hold-up and mass transfer coefficient by tracer dynamic technique in “Emulsair” reactor with an emulsion-venturi distributor

Hydrodynamics and gas-liquid mass transfer have been investigated in an “Emulsair” reactor with cocurrent downflow of gas and liquid. This consists of a cylindrical tank with conical bottom topped by an emulsion-venturi as the gas-liquid distributor in which the gas is self-aspired by action of the kinetic energy of the liquid recirculation. An original tracer dynamic technique using the CO₂-N₂/water system that enables the simultaneous measurement of overall gas hold-up and overall volumetric mass transfer coefficient has been developed and validated using conventional techniques, such as volume expansion for gas hold-up and dynamic oxygenation for mass transfer. It has been shown that gas hold-up and K_La_L can be deduced from the moments of experimental response curves using a CO₂ pulse in the gas feed. Experimental results have proved that hydrodynamics and mass transfer in the Emulsair reactor are strongly influenced by the flow regime in the divergent. Two different regimes have been observed depending on the liquid recirculation flow rate: annular and homogeneous bubbling flows. In both regimes, self-aspired gas flow rate, gas hold-up and K_La_L have been reported to increase with the liquid flow rate. The operation effectiveness, estimated from the gas-to-liquid flow rate ratio, has been shown to pass through a maximum around 0.59 as a function of liquid recirculation. A comparison with the literature proved that this maximum is higher than those observed for other kinds of gas-liquid reactors equipped with a venturi. Correlations for mass transfer estimation have been derived and are in agreement with the literature.     

冲压式舵机动态特性测试系统的研制

为了在实验室条件下模拟冲压式舵机的舵面在空中所受的气动载荷,实现舵机系统动态性能指标的综合检测,设计了基于PXI总线的舵机动态测试系统,工作过程中对舵偏角信号、工作电流信号、扭矩信号进行实时采集、显示,并配合测试流程完成对舵机动态性能的测试。设计中重点考虑了定刚度加载系统的小扭矩加载精度、小转动惯量以及同轴度问题。实验结果表明,该测试系统测试精度高、使用维护方便,满足要求。     

Shear Strength of Pressure Sensitive Adhesives and its Correlation to Mechanical Properties

Correlations between shear resistance and the mechanical properties of pressure sensitive adhesives are studied by measuring the deformation behaviour in the static and the dynamic shear test and determining the dynamic shear modulus of the adhesive. For polymers with low or moderate viscosities, the shear strain vs. time characteristics in a static shear test and, accordingly, the static shear strength, can be evaluated from the master curves of the dynamic shear modulus or the dynamic viscosity. The dynamic shear strength also can be calculated. These exact calculations cannot be applied to highly viscous or slightly crosslinked polymers. On the basis of the model experiments, empirical correlations between shear strength and the dynamic shear modulus are established which seem to be generally valid.     

融合查询扩展和动态匹配的集外词检测

目前关键词检测面临的一个主要挑战是集外词问题。由于集外词发音的不确定性导致其检测性能与集内词相差很多。对此,本文提出了一种融合查询扩展和动态匹配的方法来改善集外词检测的性能。首先比较了基于联合多元模型的查询扩展和基于最小编辑距离的动态匹配。考虑到二者潜在的互补性,采用两种融合方法：一种方法是结果融合,分别应用查询扩展和动态匹配并行的检测集外词,然后合并检测结果;另一种是置信度融合,融合最小编辑距离和发音得分构成混合置信度进行集外词的检出与确认。实验结果表明,第二种融合方法的效果更好,系统的品质因数相对提升了19.8%。     

Optimal reaction conditions for the minimization of energy consumption and by‐product formation in a poly(ethylene terephthalate) process

We determined the optimal reaction conditions to minimize the energy cost and the quantities of by‐products for a poly(ethylene terephthalate) process by using the iterative dynamic programming (IDP) algorithm. Here, we employed a sequence of three reactor models: the semibatch transesterification reactor model, the semibatch prepolymerization reactor model, and the rotating‐disc‐type polycondensation reactor model. We selectively chose or developed the reactor models by incorporating experimentally verified kinetic models reported in the literature. We established the model for the entire reactor system by connecting the three reactor models in series and by resolving some joint problems arising when different types of reactor models were interconnected. On the basis of the simulation results of the reactor system, we scrutinized the cause and effect between the reaction conditions and the final quality of the polymer product. Here, we set up the optimization strategy by using IDP on the basis of the integrated reactor model, and the process variables with significant influence on the properties of polymer were selected as control variables with the help of a simulation study. With this method, we could refine the reaction conditions at the end of each iteration step by contracting the spectra of control regions, and the iteration process finally stopped when the profile of the optimal trajectory converged. We also took the constraints on the control variables into account to guarantee polymer quality and to suppress side reactions. Constituting six different strategies by setting weighting vectors differently, we examined the differences in optimal trajectories, the trend of optimality, and the quality of the final polymer product. For each of the strategies, we conducted the optimization to examine whether the number‐average degree of polymerization approached the desired value. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 993–1008, 2002     

沸石的碱处理溶解

晶体的溶解与晶体的生长存在着密切的联系，详细研究沸石晶体的溶解行为将有助于更好的理解沸石晶体的生长机理。鉴于目前对沸石晶体的碱处理溶解行为的研究尚处于初始阶段，所以从沸石碱溶解的几点关键内容出发，如沸石的硅铝比对沸石碱处理的影响，焙烧“活化”后沸石的碱处理溶解行为的变化，沸石与其无定形前驱物的溶解性差异以及沸石的溶解机理和溶解动力学方程方面，综述了有关沸石碱处理溶解研究方面的最新动态。     

Dynamic Mechanical Properties and Adhesive Strengths of Emulsion Polymer by Power Feed Technique, I

Dynamic mechanical properties and adhesive strengths of power feed copolymer and random copolymer synthesized using styrene or methyl methacrylate and n-butyl acrylate were investigated. Although the two systems were synthesized from the same raw materials, power feed copolymer had a very broad transition compared with random copolymer. This fact was explained by the fact that the system synthesized through power feed method was an alloy of copolymers which are a continuous series from monomer A rich copolymers to monomer B rich copolymers. The dynamic mechanical behavior of film cast from solution was almost the same as that of emulsion film, which indicated more extensive application of power feed copolymer. In the P(nBA/St) system, power feed copolymer maintained its adhesive strengths over a wide temperature range compared with random copolymer. The absolute value, however, was not so high. This was due to the low cohesive strengths of the films.     

融合动态层次聚类和邻域区间重组的蚁群算法

针对蚁群算法搜索速度过慢以及解质量不足等问题,提出一种融合动态层次聚类和邻域区间重组的蚁群算法。在初始阶段,调整层次聚类阈值并按照类间距离最小合并的原则迭代至目标簇集,根据预合并系数进行簇间合并,通过蚁群系统得到小类路径并断开重组以加快算法整体收敛速度;接着使用蚁群系统对解空间进行优化,同时并行处理簇集与簇集邻域区间扩散重组,增加解的多样性,进一步固定迭代次数进行比较,若邻域区间重组解质量优于当前优化解则进行推荐处理,提高解的精度;当算法停滞时,引入调整因子降低各路径信息素之间差异以增强蚂蚁搜索能力,有助于算法跳出局部最优。实验结果表明,在面对大规模问题时,算法的精度在3%左右,该方法相比传统方法可以有效提高解的精度和收敛速度。