基于ADSP21XXC运行环境下FFT的实现

介绍了数字信号处理器ADSP21XX芯片的特点以及实现FFT(快速离散付里叶变换)的方法，给出了ADSP21XX的C和汇编混合编程的特点及技巧。     

UniMAT PLC在塑料挤出机控制系统中的应用

针对塑料挤出机控制系统成本高、速度低、精度低的问题,提出采用UniMATPLC控制方式,实践证明效果良好。     

钛合金中亚晶的电子显微镜观察

用透射电子显微镜观察了TC6钛合金在高温退火过程中形成的亚晶(Subgrain)。合金经850℃,920℃退火后炉冷和空冷,在初生α相晶粒内形成亚晶,多为成簇分布的狭长形状,亚晶的数量随退火后冷却速度的增加而减少。亚晶界(Subgrain boundary)是由位错构成的,亚晶的形成是多边化(polygonization)的结果。     

TC11钛合金中氧铝偏析与脆性断裂

借助ＳＥＭ及ＥＤＡＸ、ＡＥＳ对某些ＴＣ１１钛合金棒材机械性能差的原因进行了研究。。结果表明材料延伸率、断面收缩率及冲击值低，显微硬度值高的拉伸和冲击断口上都呈现脆性解理断裂的断裂源，源区显微组织为条状α及空洞，且氧铝偏高。氧铝偏高造成α＋β→β相变温度和再结晶温度升高，使加工变形中形成的条状α在随后的热处理中得不到改变，并导致拉伸、冲击时的脆性断裂     

Flood Inundation Modelling for Mid‐Lower Brisbane Estuary

This study utilizes a two‐dimensional hydrodynamic model to calibrate and validate an inundation model for the Brisbane River estuary in Queensland, Australia. The bathymetry data used in the hydraulic model are derived from one arc second (1 s) shuttle radar topography mission digital elevation model, and the two‐dimensional hydraulic model is parameterized using the generated bathymetry with four open boundaries with water level observations and roughness coefficients. The calibration performance is evaluated by comparing the simulated results with the digitized records during the January 2013 flood event (a low magnitude event) at three gauging stations. The calibrated model is validated with water level data and available discharge data during the January 2011 flood (a large magnitude event) at four gauging stations located along the Brisbane River. Different performance indices are applied to demonstrate that the developed model performs well during calibration and validation. A sensitivity analysis is presented to assess the influence of riverbed elevation changes on the model because the main uncertainty of the model is the bathymetry data. The proposed model with the shuttle radar topography mission digital elevation model‐derived riverbed elevation for the Brisbane estuary is able to predict the flood inundation extent at an accuracy of 66.9% which is higher than or comparable with the accuracies of the existing studies. However, it is expected that the accuracy will increase if some improved bathymetry data become available in the future. Copyright © 2016 John Wiley & Sons, Ltd.     

基于GSM网络的汽车防盗系统研制

以STC89C52单片机和西门子公司的TC35I GSM模块为核心,设计了以手机短信实时监控汽车状态的防盗系统,实现了汽车的无线监控.     

基于GSM模块TC35I的收发控制系统设计

基于GSM网络平台,采用了TC35I和STC89C52作为数据收发系统,进行单片机STC89C52与短信收发模块TC35I的数据传输,以及PC机与STC89C52通信的研究,并进行了系统硬件与软件方案的设计和系统调试.利用PC机作为数据管理和服务器,实现了PC机、STC89C52单片机与TC35I收发系统的通信.     

A Cross-sectional Study on the Relationship Between Homocysteine and Lipid Profiles Among Chinese Population from Hunan

Previous studies have explored the relationship between homocystein (Hcy) and lipid profiles. However, the results from these studies have been inconsistent. The current study investigated the correlation between Hcy and lipid profiles in Chinese community-based population. The participants were composed of 4012 Chinese people aged 30–92 years old, who were recruited from rural and urban communities in the Hunan Province. Non-parametric test and logistic regression were used to examine the distribution of Hcy and lipid profiles (triglyceride [TG], total cholesterol [TC], low-density lipoprotein cholesterol [LDL-C], high-density lipoprotein cholesterol [HDL-C]) and the relationship between them. The median age of subjects was 54.50 years old, and 40.98% were male. Median Hcy was 13.20 μmol/L, and 35.39% had hyperhomocysteinemia (HHcy). Median TG was 1.51 mmol/L, TC was 4.77 mmol/L, LDL-C was 2.62 mmol/L, and HDL-C was 1.27 mmol/L. In multivariable logistic regression analysis, HHcy was associated with high levels of TG (OR_male = 2.240, p < 0.001; OR_female = 2.539, p < 0.001), TC (OR_male = 2.237, p < 0.001; OR_female = 2.202, p < 0.001), and LDL-C (OR_male = 1.413, p = 0.010; OR_female = 1.617, p < 0.001) in the different sexes population and low level of HDL-C in females (OR = 1.326, p = 0.023) after adjusting for confounders. HHcy was independently associated with an increasing risk of low HDL-C among females. The regression analysis showed that HHcy was also associated with hypertriglyceridemia, hypercholesterolemia, and high level of LDL-C in males and females from Chinese community-based population, which provides a basis for the treatment and prevention of abnormal lipid metabolism.     

钛合金表面双层辉光离子渗铝的研究

利用双层辉光渗金属技术，以铝为源极、TC4(Ti-6Al-4V)为阴极、氩气为工作气体，依靠辉光放电和不等电位空心阴极效应在TC4表面形成合金层。采用X射线衍射和辉光放电光谱分析了合金层的相组成及渗层内Al元素的分布．并对其进行硬度测试。结果表明：渗层由Ti3Al和α-Ti组成；铝的含量可达18％；渗层厚度可达13μm；其硬度比经渗铝处理后的有了较大程度的提高。     

TC4钛合金的微动疲劳行为研究

研究了TC4钛合金在柱面-平面接触条件下的微动疲劳行为.通过观察微动区的磨损特征和截面形貌,分析了微动疲劳损伤机制,探讨了磨屑的形成与演变过程及其对微动疲劳行为的影响,考察了摩擦系数随时间的变化.结果表明,TC4钛合金微动区的损伤机制以粘着磨损、磨粒磨损和接触疲劳为主,并伴有氧化磨损.磨屑是基体材料脱落、破碎、氧化形成的,磨屑中的硬质氧化物颗粒促进了合金表面的磨粒磨损,加速了疲劳失效.