低合金耐海水腐蚀钢在模拟腐蚀环境下的耐蚀性能研究

以普碳钢为对比样,采用模拟海水全浸和间浸、盐雾、湿热等加速腐蚀实验并结合电化学测试技术研究了Cu-Cr-Mo系低合金耐海水腐蚀钢Q345C-NHY3的耐蚀性能.结果表明：在各种模拟环境条件下与碳钢相比Q345C-NHY3钢都具有较好的耐蚀性能.     

电机转子线圈焊接工艺及设备研究

本文就电机转子线圈采用电阻钎焊的可行性进行了论述,并就几种焊接方法的接头性能进行了分析对比,同时还阐述了电机转子线圈电阻钎焊机的结构原理。     

ZrO2—SiO2—Al2O3系复相陶瓷制备及其耐磨性试验研究

利用等离子分解锆英石（PDZ）和锆英粉与Al2O3反应烧结制备了ZiO2-SiO2-Al2O3系复相陶瓷。利用XRD、SEM、反光显微镜、显微硬度计等测试手段，对烧成试样的物相组成、显微结构、显微硬度、气孔状况及耐磨性进行了测试分析与讨论。研究结果表明：含镁助剂的加入促进了反应烧结；由PDZ制备的试样的性能优于锆英粉原料的试样：较佳的原料配比为No.4即Al2O3:PDZ=3:1，其耐磨性优于氧化铝质研磨体，适宜的烧成温度范围是1580℃－1600℃。     

Processing-structure-multi-functional property relationship in carbon nanotube/epoxy composites

The novel properties of carbon nanotubes have generated scientific and technical interest in the development of nanotube-reinforced polymer composites. In order to utilize nanotubes in multi-functional material systems it is crucial to develop processing techniques that are amenable to scale-up for high volume, high rate production. In this research we investigate a scalable calendering approach for achieving dispersion of CVD-grown multi-walled carbon nanotubes through intense shear mixing. Electron microscopy was utilized to study the micro and nanoscale structure evolution during the manufacturing process and optimize the processing conditions for producing highly-dispersed nanocomposites. After processing protocols were established, nanotube/epoxy composites were processed with varying reinforcement fractions and the fracture toughness and electrical/thermal transport properties were evaluated. The as-processed nanocomposites exhibited significantly enhanced fracture toughness at low nanotube concentrations. The high aspect ratios of the carbon nanotubes in the as-processed composites enabled the formation of a conductive percolating network at concentrations below 0.1% by weight. The thermal conductivity increased linearly with nanotube concentration to a maximum increase of 60% at 5 wt.% carbon nanotubes.     

新型植物杀菌剂--苯并噻二唑类植物抗病诱导剂

植物抗病诱导剂是近年来发现的一种新型植物杀菌剂，苯并噻二唑类(BTH)就是其中重要的一类。对近年来BTH研究情况作一简要综述。     

Thermoelectric properties of SbNCa3 and BiNCa3 for thermoelectric devices and alternative energy applications

Thermoelectric properties of two antiperovskites SbNCa₃ and BiNCa₃ are calculated using first principles calculations. High values of Seebeck coefficients are observed for these materials. Electrical and thermal conductivities are also calculated. Increase in thermal conductivity and decrease in electrical conductivity are found with increasing temperature. The maximum values of thermal conductivity are 92×10¹⁴  W/m K s and 88×10¹⁴  W/m K s for SbNCa₃ and BiNCa₃ respectively at a temperature of 900 K. The peak values of 5×10²⁰/Ω m s and 5.2×10²⁰/Ω m s are achieved for n-type SbNCa₃ and BiNCa₃ respectively at a temperature of 300 K. Figure of merit is achieved for these materials at room temperature which shows that these materials can be useful for thermoelectric devices and alternative energy sources.     

Electrical double layer characteristics of nanoporous carbon derived from titanium carbide

Electrochemical parameters of the nanoporous carbide-derived carbon|organic electrolyte have been studied by cyclic voltammetry and electrochemical impedance spectroscopy. The gas adsorption measurements have been used for evaluating the specific surface area, pore size distribution and porosity as the essential parameters influencing the double layer performance of carbon. The region of ideal polarizability, values of series and parallel resistance, capacitance and other important electrical double layer parameters were established. It was shown that specific capacitance of typical nanoporous carbon derived from titanium carbide is in the range of 70-90 F cm⁻³ or 100-130 F g⁻¹ and it depends on the synthesis conditions. The influence of the electrolyte solvent to the capacitance was insignificant, although acetonitrile was advantageous with respect of smaller viscosity.     

隔膜中残油量对锂电池性能的影响

锂离子电池隔膜在锂离子电池中主要起隔绝正负极防止短路和允许锂离子导通的作用[1],因此,锂离子电池隔膜品质的优劣直接影响到锂离子电池的应用性能。在锂电池隔膜制备的过程中,以石蜡油作为造孔剂,用热致相分离法制备聚乙烯微孔膜,石蜡油的残留不可避免。本文研究了隔膜中石蜡油的残留量对电池自放电、倍率放电、高温存储、循环性能等应用性能的影响。研究结果表明,残油量越低锂电池的应用性能越优。     

A unified theory on solid-liquid separation: Filtration, expression, sedimentation, filtration by centrifugal force, and cross flow filtration

Based upon a new conception that the solid compressive pressure on a cake surface is not null, almost of all solid-liquid separation operations have been re-examined. For cake filtration, the phenomenon caused by the solid compressive pressure on a cake surface is discussed for thin cake. New expression and hindered sed-imentation theories are developed by above new conception using Darcy’s equation. Application of the new conception to centrifugal filtration and tangential filtration is also discussed. Above results lead to the conclusion that cake filtration, expression, hindered sedimentation, centrifugal filtration and tangential filtration can be described with a unified theory, and the main difference between the operations is only the boundary condition of cake.     

利用电阻探针对石油设备及管道的腐蚀进行监测

从1998年起，国内石油炼制行业开始大量炼制进口高硫原油，油气管道的腐蚀问题受到了重视。介绍了电阻探针腐蚀监测系统的原理及组成。并针对油气管道，实施了在线监测，安装了6组腐蚀电阻探针，分析了测量结果，为今后防腐工作提供了依据。