电子束辐照预硫化技术在轮胎轻量化中的应用

研究电子束辐照预硫化技术在轮胎轻量化中的应用。采用经过电子束辐照预硫化的胎体,可以减薄、减窄过渡层,从而减小轮胎质量,降低生产成本,并且轮胎不会出现胎里露线现象,同时不会影响成品轮胎的充气外缘尺寸、高速性能和耐久性能。     

超高纯钛在哈尔滨新区实现量产北大核心

国内可以批量生产超高纯钛晶的基地坐落在哈尔滨新区。据悉,博睿创富总投资2.6亿元,主要业态为一基地、两中心,即博睿创富高纯金属材料产业基地、高纯金属材料研发中心和教育培训中心。2019年8月,厂区建筑主体竣工验收。2020年5月1日,设备安装调试完成投入试产。生产车间的设备有16台套,主要包括真空电解炉、电子束熔炼炉、真空感应精炼炉、真空电阻熔化炉、10000 t油压机、金相显微镜及金相分析软件系统、超声波测试仪等仪器设备。     

纯镁和AZ31镁合金的电子束焊接性能

电子束焊接(EB)与惰性气体钨极电弧焊(TIG)相比,焊接过程在真空状态下不受氧和其它气体影响。另外基体金属在电子束作用下热损失少,加热快。电子束焊接适合于惰性气体钨极电弧焊的铝合金。但进行镁及镁合金焊接时,由于其蒸气压低,容易产生起弧现象,焊接过程易被中断。另外,镁及其合金因为熔点低,在熔融区易产生气孔,同时,也易出现熔穿现象。日本科技人员对镁及其合金的电子束焊接机理及机械性能进行了研究。 试验材料采用挤压材,机加后试样尺寸为4 mm×55 mm×50mm。电子束焊机最大输出功率为6kW,焊箱真空度为3×10-3Pa。加速电压为150k…     

Electron beam welding of Re and BT5-1 titanium alloy

Based on the binary alloy phase diagram of Re-Ti, the weldability of Re and BT5-1 titanium alloy was analyzed. Using two methods of direct electron beam welding （EBW-D） and intergradafion electron beam welding （EBW-I）, Re and BT5-1 was welded. Experimental results show that the joint figuration of EBW-D between Re and BT5-1 is not fine, and the joint is inclined to brittleness rupture. The joint figuration of EBW-I between Re and BT5-1 is fine. No cracking and other disfigures occur in the intergradation joint. The element distribution of Re, Me, and Ti in the weld metal is progressional diversification.     

TiAl合金的电子束蒸发行为

建立了TiAl合金蒸发和沉积数学模型，采用活度系数体现溶池中不同组元的相互作用，影响组元蒸发速率的因素主要有元素饱和蒸气压和活度系数，计算值与试验值符合良好。研究结果表明，TiAl合金可以采用底部连续进给单一水冷铜坩埚通过电子束物理气相沉积得到。     

Investigation on gradient material fabrication with electron beam melting based on scanning track control

A new electron beam control system was developed in a general vacuum electron beam machine by assembling with industrial control computer, programmable logic control （PLC）, deflection coil, data acquisition card, power amplifier, etc. In this control system, scanning track and energy distribution of electron beam could be edited off-line, real-time adjusted and controlled on-line. Ti-Mo gradient material （GM） with high temperature resistant was fabricated using the technology of electron beam melting. The melting processes include three steps, such as preheating, melting, and homogenizing. The results show that the GM prepared by melting technology has fine appearance, and it has good integrated interface with the Ti alloy. Mo and Ti elements are gradually distributed in the inter.face of the gradient material. The microstructure close to the Ti alloy base metal is α ＋ β basket-waver grain, and the microstructure close to the GM is a single phase of β solid solution.     

无机涂料

0401050 uv吸收的耐磨多层无机透明涂料的电子束沉积:w003一38 141[国际专利申请,德]/德国:Fraunhofer一Gesellsehaft zur Foerderung derAngewandten FOrschung e.V(Neumann,Manfred等)一2003一5.8一18页一DE10 153 760(2001.10.31);IPC C23C14/06 本发明涉及用真空涂装形成UV