Structural transformation of FePt nanocomposite films during annealing and its effects on magnetic properties

Fe100-xPtx(x=30at.%-60at.% ) nanocomposite films were deposited on natural-oxidized Si(100) substrates by magnetron sputtering. The as-deposited films were annealed between 373 and 1073 K. In situ X-ray diffraction shows that the FePt nanocomposite films undergo a phase transformation from a disordered FCC phase to an ordered L10 phase between 673 and 773 K. The coercivity is 306 kA·m-1 whiles the average grain sizes is about 10 nm in the optimized FePt alloy film sample annealed at 673K. The adjustable coercivity and fine grain size suggest that this FePt nanocomposites system is suitable as recording media at extremely high areal density.     

�����������������������������ܿ��������о�

白马庙气田蓬莱镇气藏储层致密 ,孔隙结构复杂 ,非均质性强 ,单井产能低 ,研究储层特征和受控因素 ,加强储层改造方是气藏效益开发的出路。储层精细研究揭示 ,气井产能受沉积相和构造条件控制 ;高、中产井与大而厚、物性好的河口坝、河道砂坝沉积微相有关 ,纵向上具很强的层段性 ,主产层集中在Ⅳ～③、Ⅲ～③两套砂组 ,其钻探成功率分别达 82 %和 10 0 % ;平面上多分布于主体构造和东南鼻状突起 ,二者高、中产能井分别占 30 %和 70 %。在深入的地质研究和储层压裂评层选井的基础上 ,采用多层打开、分层压裂、多层合采的方法可提高气井产能 ,并形成了一套行之有效的压裂评层选井的综合配套技术。采用该技术优选出 19口井 ,已实施 5口井全获成功 ,气产量成倍或十几倍增加 ,其中白浅 4 5井气无阻流量高达 18× 10 4m3 /d ,白浅 38井投产 16 5d净增产值 10 0余万元     

Constitutive modelling and numerical simulation of multivariant phase transformation in superelastic shape‐memory alloys

This work concerns the micromechanical constitutive modelling, algorithmic implementation and numerical simulation of polycrystalline superelastic alloys under multiaxial loading. The model is formulated in finite deformations and incorporates the effect of texture. The numerical implementation is based on the constrained minimization of the Helmholtz free energy with dissipation. Simulations are conducted for thin tubes of Nitinol under tension–torsion, as well as for a simplified model of a biomedical stent. Copyright © 2004 John Wiley & Sons, Ltd.     

A three‐dimensional model describing stress‐temperature induced solid phase transformations: solution algorithm and boundary value problems

An always increasing knowledge on material properties as well as a progressively more sophisticated production technology make shape memory alloys (SMA) extremely interesting for the industrial world. At the same time, SMA devices are typically characterized by complex multi‐axial stress states as well as non‐homogeneous and non‐isothermal conditions both in space and time. This aspect suggests the finite element method as a useful tool to help and improve application design and realization. With this aim, we focus on a three‐dimensional macroscopic thermo‐mechanical model able to reproduce the most significant SMA features (Int. J. Numer. Methods Eng. 2002; 55 : 1255–1264), proposing a simple modification of such a model. However, the suggested modification allows the development of a time‐discrete solution algorithm, which is more effective and robust than the one previously discussed in the literature. We verify the computational tool ability to simulate realistic mechanical boundary value problems with prescribed temperature dependence, studying three SMA applications: a spring actuator, a self‐expanding stent, a coupling device for vacuum tightness. The effectiveness of the model to solve thermo‐mechanical coupled problems will be discussed in a forthcoming work. Copyright © 2004 John Wiley & Sons, Ltd.     

Gleeble 3800热模拟试验机在宝钢的典型应用与功能开发

热模拟试验可研究成分与各工艺参数对组织和性能的影响，用于指导产品设计和实际生产工艺的制定，还有助于建立数学模型。文章介绍了Gleeble 3800热／力模拟试验机在宝钢实际应用中的几个典型试验，包括高温热塑性试验、多道次变形试验、冷轧薄板相转变点试验和HAZ焊接热影响区热模拟试验等。这些试验可用来解决连铸、轧钢和冷轧产品热处理生产中存在的一些问题。     

秦牧散文的文体改造与源流

秦牧作为17年时期重要的散文家之一，其成绩是与他所自觉进行的文体改造分不开的。秦牧的身份和处境使得他的文体改造颇为顺利。秦牧17年文体改造体现在特写强调、抒情风味、辨证色彩三个方面，这与当时的文风密切相关。秦牧的文体改造延续了学者散文的文脉，也印证了文体改造在文学史上的积极意义。     

中子辐照金刚石生成卡宾碳

金刚石在中子辐照下发生相转变,得到了线性结构的卡宾碳。所得产物为覆盖金刚石表面的黑色薄膜状物质,其拉曼光谱在2191cm-1处有强峰,归属于C≡C伸缩振动;同时,其俄歇电子谱的峰位与金刚石相比有5eV的位移,证实了卡宾碳的存在。在中子辐照条件下,金刚石向卡宾碳的转化可能是通过碳原子堆垛形式发生变化而实现的。     

Cu—Zn—Al系合金热弹性马氏体相变的热滞

本文通过热处理工艺及添加第四组元研究了Cu－Zn－Al系记忆合金的相变热滞。结果表明，淬火冷却速度影响合金的相变热滞大小，随着母相时效时间的延长，马氏体相变热滞变大．Mn元素的加入可以减小CU－Zn－Al合金相变热滞．     

β″－Al_2O_3陶瓷的强化和韧化

研究了稳定ＺｒＯ＿２和部份稳定ＺｒＯ＿２对β″－Ａｌ＿２Ｏ＿３陶瓷的强化和韧化作用，观察了不同种类、不同含量的ＺｒＯ＿２对β″－Ａｌ＿２Ｏ＿３陶瓷的显微结构、力学性能和电导率的影响，探讨了β″－Ａｌ＿２Ｏ＿３的韧化机理。     

铸铁热分析用试样新型激冷剂的实验研究

从冷却曲线上相变段倾角最小原则出发，研究了新型激冷剂的配比与热分析法检测铸铁成分精度的关系，实验结果表明，能使相变段倾角最小的成分配比，也能提高对铸铁成分的热分析和检测精度。