Photophysical studies of copolymers of N‐vinylcarbazole

The absorption, fluorescence excitation and emission spectroscopy, and time‐dependent spectrofluorimetry have been used to study the photophysics of copolymers of N‐vinylcarbazole with different monomers like vinyl acetate, methyl acrylate, methyl methacrylate, butyl acrylate, and butyl methacrylate in dichloromethane. In all the copolymers and at different N‐vinylcarbazole content, the absorption spectra reflect only the monomer carbazole units. The two kinds of excited monomer species of N‐vinylcarbazole are present in S₁ state. Short‐lived (～3 ns) excited monomer decays forming low energy excimer obtained by the complete overlap of the excited carbazole monomer. The long‐lived excited monomer (～8 ns) decays to ground state without formation of any excimer. The high energy excimer is relatively short‐lived and is formed by the partial overlap of the carbazole units. The presence of bulky group in the copolymer chain hinders the formation of excimers. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 372–380, 2006     

Phosphate availability in calcareous Vertisols and Inceptisols in relation to fertilizer type and soil properties

The availability to plants of fertilizer phosphorus (P) applied to soil, as measured by chemical extraction, is used to estimate P fertilizer needs. We studied the availability of P, applied as monocalcium phosphate (MCP) powder, ordinary superphosphate (OSP) granules and diammonium phosphate (DAP) granules in 24 calcareous Vertisols and Inceptisols of Andalusia, Spain, by using laboratory incubation techniques. The soils differed widely in their P adsorption- and Ca-phosphate precipitation-related properties. For MCP, availability (defined as the proportion of added P that is recovered by extraction with NaHCO₃ or is isotopically exchangeable) decreased markedly with incubation time and increasing addition rate. The mean recoveries after 180 d of incubation at field capacity at a rate of 246 mg P kg^–1 soil were 17% for Olsen P, 38% for Colwell P, and 16% for isotopically exchangeable P (IEP). Increasing the application rate to 2460 mg kg^–1 resulted in recoveries of 6% for Olsen P, 25% for Colwell P, and 4% for IEP. While IEP-based recovery was not significantly correlated to any soil property, that based on Olsen P (and, to a lesser extent, Colwell P) decreased sharply with increase in the ratio of clay (or Fe oxides) to total (or active) calcium carbonate equivalent. Accordingly, Olsen P might overestimate P availability in those soils relatively rich in carbonate and poor in clay and Fe oxides. On the other hand, recovery of applied P from soils containing more clay and Fe oxides, by a sequential extraction (with H₂O, two 0.5M NaHCO₃ treatments, 0.5M HCl), was lower than 100%, thereby suggesting phosphate occlusion by Fe oxides or clay.Availability of the fertilizers tested 90 d after application was found to decrease in the following order: MCP powder (rate, 246 mg kg^–1) > DAP granules (rate, 547 mg kg^–1) > MCP powder (rate, 738 mg kg^–1) > OSP granules (rate, 308 mg kg^–1). Differences between fertilizers tended to increase with increasing carbonate content in the soil. This may have been due to precipitation of Ca phosphates caused by the presence of Ca in the fertilizer and the high Ca- supplying capacity of the more calcareous soils.     

Piezoresistivity in Polymer-Ceramic Composites

Composite materials composed of randomly dispersed semiconducting ceramic particles in an insulating polymer matrix show a pronounced change in resistivity with pressure. Different amounts of iron oxide (Fe₃O₄) powder and antimony-doped tin oxide (SnO₂:Sb) powder were dispersed in an epoxy polymer matrix to form pressure-sensitive composites. In each family of materials, an insulator-to-semiconductor transition is observed in agreement with percolation theory. Composites within a certain range of filler content showed substantial piezoresistive effect under both uniaxial and hydrostatic pressure in which sensitivity is controlled by the choice of filler material and the volume fraction. The effect of temperature on the piezoresistance effect was also examined. Piezoresistors made from Fe₃O₄ composites showed larger temperature changes than those filled with Sb-doped SnO₂.     

Synthesis and characterization of poly(vinyl chloride‐co‐vinyl acetate)‐graft‐poly[(meth)acrylates] by atom transfer radical polymerization

The graft polymerization of methyl methacrylate and butyl acrylate onto poly(vinyl chloride‐co‐vinyl acetate) with atom transfer radical polymerization (ATRP) was successfully carried out with copper(I) thiocyanate/N,N,N′,N′,N″‐pentamethyldiethylenetriamine and copper(I) chloride/2,2′‐bipyridine as catalysts in the solvent N,N‐dimethylformamide. For methyl methacrylate, a kinetic plot of ln([M]₀/[M]) (where [M]₀ is the initial monomer concentration and [M] is the monomer concentration) versus time for the graft polymerization was almost linear, and the molecular weight of the graft copolymer increased with increasing conversion, this being typical for ATRP. The formation of the graft polymer was confirmed with gel permeation chromatography, ¹H‐NMR, and Fourier transform infrared spectroscopy. The glass‐transition temperature of the copolymer increased with the concentration of methyl methacrylate. The graft copolymer was hydrolyzed, and its swelling capacity was measured. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 183–189, 2005     

用混合式遗传算法进行给水管网现状分析

将广义简约梯度法(GRG)思想应用于传统遗传算法,提出一种新的混合式遗传算法(HGA),此方法具有很强的全局和局部搜索能力,并且无需复杂的编码、解码过程,可以准确解决多变量、多峰值的给水管网现状分析问题。采用此算法,绝大多数的计算值与实测值的误差可减小到1%以下,能准确反映管网的实际工况。     

基于直方图的水墨画艺术风格研究

基于内容的照片或自然图像分析和检索已经得到广泛的研究,但多数都基于颜色特征,不能直接用于水墨画艺术作品的分析。对图像进行预处理,提出基于灰度直方图描述水墨画笔道力度分布信息及构图风格,并利用神经网络学习水墨画整体技法风格特征,依据此特征进行不同艺术家间的分类。实验结果表明,通过对整体风格特征的提取,直方图模型能够有效表征画家不同的艺术风格,实现了水墨画的自动分类。     

Immobilization of a cyclodextrin glucanotransferase (CGTase) onto polyethylene film with a carboxylic acid group and production of cyclodextrins from corn starch using CGTase‐immobilized PE film

Carboxylic acid groups were introduced onto polyethylene (PE) film by radiation‐induced graft copolymerization. Subsequently, the clodextrin glucanotransferase (CGTase) was immobilized on the PE film with a carboxylic acid group. The activity of the immobilized CGTase on PE film was in the range of 0.40–1.04 U/cm² per min. The production of cyclodextrins (CDs) from corn starch was examined using the CGTase‐immobilized PE film. The production ratios of CDs using CGTase‐immobilized PE film was in the following order: α–CD > β–CD > γ–CD. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 2451–2457, 2002     

无线体域网技术研究现状与展望

无线体域网(WBAN)技术是当前重要的研究热点,可以应用于医院内患者实时监测和家庭健康护理领域,具有广泛的应用前景和巨大的市场潜力。WBAN对设备的可穿戴性和数据传输的可靠性、安全性提出了更高的要求,技术发展中存在一些需要深入研究和解决的问题。对WBAN关键技术的研究现状和产业化进展进行了综述,并对WBAN技术的未来研究和发展前景进行了展望。     

便携心电传感器的心房肥大诊断研究

基于便携式传感器的模式识别在心电(ECG)监护领域具有广泛的应用前景,并且在心律不齐、心肌梗塞、心室肥大等心电的识别算法上都已有大量的研究与应用,但在心房肥大诊断上却未有模式识别相关的研究成果。心房肥大病症的心电数据量不足给研究造成重大障碍,部分分类器无法适应小样本训练下的分类。针对小样本训练进行研究,对比了不同分类方法,显示了基于统计模式识别的支持向量机(SVM)应用于心房肥大的应用潜力。另外,由于不同个体的心房肥大心电存在差异,在实际应用环境中,SVM存在无法良好泛化的问题,存在类别错分的医学风险。针对类别错分情况,采用分类器融合的方法改进分类器,提出了在SVM分类器输出端增加了拒绝域的分类器(SVM-R)的方法。实验结果表明:SVMR有较高的分类准确率与诊断可信度。     

基于专家系统的汽车衡故障传感器判别

传感器是自动化设备的核心部件,传感器故障检测显得尤为重要。针对目前汽车衡维护、检修的困难,为有效准确判断故障传感器,提出了以径向基函数神经网络（RBFNN）预估值的初始化数据库专家系统判别方法。经现场测试准确率达到96%以上,从而有效简单地判定传感器好坏和识别故障传感器的位置。