国内外邻苯二甲酸酯类增塑剂的现状和展望

对邻苯二甲酸酯类增塑剂的国内外现状作了评述,并对我国提高DOP和高分子量邻苯二甲酸酯类增塑剂的比例、降低DBP的比例、开发高性能的复合增塑剂提出了积极的建议。     

复分解四步循环法制取硫酸钾新工艺

介绍了制取硫酸钾的一种新工艺－－复分解四步循环法，即氯化钾与硫酸铵反应生成硫酸钾铵与氯化铵钾，硫酸钾铵再与氯化钾溶液反应生成硫酸钾，氯化铵钾再与硫酸铵溶液反应生成氯化铵。整个工艺全封闭循环生产，产品硫酸钾K2O质量分数≥50％，钾收率达92％。     

世界氯乙烯工业发展近况

对氯乙烯（VCM）的全球市场概况、主要生产技术及其研究开发动向进行了综述。     

聚氯乙烯塑料中多种邻苯二甲酸酯类增塑剂的同时测定

为了在线监控聚氯乙烯塑料中增塑剂的含量,利用傅立叶变换红外光谱法-ATR技术测定样品的红外光谱,采用偏最小二乘法对所测红外光谱进行分析,建立了一种无损快速分析方法,定量地测定聚氯乙烯塑料中多种邻苯二甲酸酯类增塑剂的含量。该方法测量精密度的变异系数小于6%,测量准确度的变异系数小于3%。该方法不受基体的干扰,简单快速,适合于流水线的质量控制。     

Lewis酸存在下的自由基共聚合——Ⅰ.GeCl_4与BCl_3存在下的乙酸乙烯酯与丙烯酸交替共聚

乙酸乙烯酯(VAc)与丙烯酸(AA)在GeCl_4及BCl_3存在下通过自由基聚合可得到交替共聚物。对GeCl_4体系,聚合反应速率正比于[引发剂]~(0.5)。当VAc/AA=1:1(mol比)时有最大反应速率。CCl_4对本聚合反应无链转移作用。通过紫外光谱分析可证实VAc及AA均与GeC\(?)生成络合物;ESR分析表明,络合AA自由基较未络合AA有较强的阳离子特性,交替共聚的原因可能与络合AA自由基及活化单体络合物二者有关。     

氯化低分子聚乙烯的应用研究

本文叙述了氯化聚乙烯的国内外发展概况。研究了低分子聚乙烯的氯化工艺路线与生产方法，测定了熔融本体氯化方法生产的氯化低分子聚乙烯性能。探讨了ＣＬＰＥ在高分子材料加工，纺织上浆等各个方面的应用。     

从煤矸石制取氯化铝联产橡胶填料的研究

在实验室小试、中试装置上进行了从煤矸石制取氯化铝联产橡胶填料的研究，考察了煤矸石性质、工艺条件等对产品质量的影响，结果发现最佳工艺参数为焙烧温度６００～ｑ００℃．焙烧时间为１５～９０ｍｉｎ．焙烧温度对产品质量影响更为显著，制得结晶氯化铝产品质量达到合格品标准，填料用作橡胶制品填充剂具有较好补强与抗曲性能，其胶片的物理机械性能达到普通橡胶板标准。     

Strength, durability and micro-structural aspects of high performance volcanic ash concrete

This paper presents the results of investigations to assess the suitability of using volcanic ash (VA) as a cement replacement material to produce high performance concrete. Tests were conducted on concrete mixtures replacing 0 to 20% by mass of ordinary Portland cement (OPC) by VA. The performance of high performance volcanic ash concrete (HPVAC) mixtures was evaluated by conducting comprehensive series of tests on fresh and hardened properties as well as durability. The mechanical properties were assessed by compressive strength, while durability characteristics were investigated by rapid chloride permeability (RCP), drying shrinkage (DS), mercury intrusion porosimetry (MIP), differential scanning calorimetry (DSC) and microhardness tests. HPVACs showed better durability properties compared to control concrete with 0% VA. The improved performance of HPVACs was attributed to the refinement of pore structure, and pozzolanic action of VA. HPVAC having a minimum 28-day compressive strength of 60 MPa can be obtained by replacing up to 20% (by mass) of cement by VA. Development of non-expensive and environmentally friendly HPVAC with acceptable strength and durability characteristics (as illustrated in this study) is extremely helpful for the sustainable development and rehabilitation of volcanic disaster areas around the world.     

偶联剂对地砖用PVC填充材料相态结构和力学性能的影响

研究了钛酸酯类偶联剂和硅烷类偶联剂对钙矿、硅酸盐填充的PVC填允材料力学性能、相态结构、密度、热失重率及吸水伸长率和耐热阻燃性能的影响。结果表明,偶联剂可改善填充PVC的抗冲性能,降低其拉伸强度,扫描电镜分析表明,填料越细,分散越均匀,越易被PVC树脂所包覆,力学性能越好,研究得到了比重大、热失重率低、吸水伸长率小、阻燃耐烧灼性好的高填充PVC硬质塑料地板砖。