Congestion pricing of multi-modal transportation systems

This paper deals with the pricing and investment decision problem of multi-modal transportation systems in which the congestion is a significant factor in the assessment of system costs. This study approaches this congestion pricing problem with a number of social welfare maximization problems, all of which have the identical structure except financial constraints. One welfare maximization problem examined in this study yields the pricing and investment decision, which can attain the first-best social optimality for multi-modal transportation systems. Other welfare maximization problems show he second-best optimal solutions that can address two policy questions in transportation economics, namely, the cross-subsidy between competing modes and peak-period congestion charges on a single highway link. Received: February 2001/Accepted: December 2001 This work was supported in part by funds from BK21 Research Division of Seoul National University for Social Infrastructure and Construction Technology.     

交联型聚醚聚氨酯的表征、力学性能及其碱金属盐络合物的导电性能

采用三羟甲基丙烷（ＴＭＰ）作交联剂与聚乙二醇（ＰＥＯ－１５４０）和甲苯二异氰酸酯（ＴＤＩ）反应，得到了具有较好力学性能的交联型聚醚聚氨酯（ＰＥＵ），该聚合物与ＬｉＣｌＯ４的结合物具有较高的室温电导率（σ３０℃＝１．８７×１０￣（－４）Ｓ／ｃｍ）。采用全反射红外光谱（ＡＴＲ－ＩＲ）对聚合物的结构进行了表征。对聚合物的组成、不同ＴＤＩ类型及络合盐浓度对聚合物力学性能及其络合物电导率的影响进行了探讨。低度交联聚合物的络合物，其电导率与温度的关系符合建立在自由体积理论上的ＶＴＦ方程，表明络合物中离子的传导主要是在无定形区域进行，与自由体积有关。     

电磁测量中误差产生的原因及消除方法

对电磁测量中所产生误差的原因进行分析,提出了消除不同误差所应采取的方法。     

YAG：Ce Phosphors for WLED via Nano-Pesudoboehmite Sol-Gel Route

The sub-micron sized YAG ： Ce phosphors were synthesized via a modified sol-gel method by peptizing nano-pesudoboehmite particulate. It is found that YAG phase from the dried gel powders appears at 1000 ℃ then the pure YAG phase exists at a relatively lower sintering temperature of 1400 ℃. The smaller sizes of phosphors in the ranges of 1 - 3 μm are obtained due to the contribution of seeding effects of nano-sized alumina particles to strengthen each step of the processes. Both the excitation and emission spectra of photoluminescence of the phosphor obtained at 1400 ℃ meet well with the spectroscopic requirements of the WLED phosphors.     

Application of the dynamical flexural resonance technique to industrial materials characterisation

The determination of the Young’s modulus and damping coefficient Q⁻¹ by means of non-destructive vibrating techniques has been applied to bulk and coated industrial materials. Extensions of a previous analytic model of composite beam allow to determine accurately the macroscopic modulus of each component of multilayered structural materials as coated superalloys or nitride-hardened steels. Furthermore, the study of glasses and polymers has been investigated. An attempt of normalisation of the modulus versus temperature curves allows to establish master curves depending on the specific structure, from metallic glasses to polymeric glasses. Finally a comparison of dynamical modulus and Q⁻¹ values measured between resonant (>1 kHz) and subresonant techniques (10⁻³ to 10 Hz) in relation to the loading frequencies applied in real conditions has been under folder. For metallic materials such as forged or rolled titanium alloys, the brittle-to-fragile transition occurs abruptly or smoothly with a shift of 300 K following the range of excitation frequencies.     

丙烯酸酯与甲基丙烯酸酯的共聚及性能研究

采用悬浮聚合法，以丙烯酸－２－乙基－己酯与甲基丙烯酸十二酯为单体，合成了共聚型高吸油性树脂。研究了共聚单体的配比、交联剂用量、引发剂用量诸因素对高吸油性树脂的性能影响。制得的树脂可以吸其自身质量的１１．８倍的煤油、１４．７倍的苯、６．５倍的泵油。     

Analysis of the MSS51 region on chromosome XII of Saccharomyces cerevisiae.

We have localized gene MSS51 on chromosome XII of Saccharomyces cerevisiae between the RDN1 and CDC42 loci. 'Head to head' with MSS51 is another gene, QRI5, the function of which is unknown. However, the proximity of these genes, the structure of the intergenic region and the presence of an ABF1 binding site right in the middle of this region suggest that the MSS51 and QRI5 expressions are submitted to a common regulatory process.     

聚合物冷拉过程的流函数分析

用流函数法分析了聚合物拉伸成形时，颈缩的发生和扩展过程，文中论证了采用流函数法的优越性和适用性，并将流函数法计算结果和有限元法计算结果作了对比。     

最大似然反褶积软件包的研制与应用

本文简明地介绍最大似然反褶积的基本原理、软件包的研制过程和应用效果。 最大似然反褶积是美国80年代研究出的一种地震资料处理新方法,它有效地解决了传统褶积模型中无法进行信噪分离的矛盾。经松辽盆地实践证明,它可以求出高分辨率和高信噪比的反射系数、最小相位化子波、合成记录、相对层速度和绝对层速度。与国外的VELOG和SEISLOG处理软件的处理结果相比,分辨率和信噪比均有很大的提高。 在软件包的研制过程中,我们主要解决了数学模型复杂和运算速度慢的问题,使最大似然反褶积在CYBER-855S计算机上成为可实用的数字处理技术。 该项技术在大庆油田朝阳沟地区进行了初步应用,结果表明,对薄层地震响应的分辨能力有明显的提高。与井岩性柱状图对比,6m以上的砂层都可以分辨出来,并且对应得比较准确。有些3m的薄层也可以找到。 该软件包的研制成功并在地震资料处理中得到应用,这在国内是首创。     

A Study of Ozone Generation by Negative Corona Discharge Through Different Plasma Chemistry Models

The Steady radial distribution of chemical species in a wire‐to‐cylinder ozone generator filled with pure oxygen has been computed by applying four different plasma chemistry models of increasing complexity. The most complete model considers ten species (e, O₂ ⁺, O₂ ^?, O₃ ^?, O^?, O₂, O₂(¹Δ_g), O₂(¹∑_g ⁺), O and O₃) and 79 reactions, including ionization by electron impact, electron attachment and detachment, electron-ion recombination, charge transfer, etc. The chemical model is coupled with the electrical model through Poisson's equation. The spatially averaged ozone density has been computed as a function of the current intensity and compared with the experimental values obtained by UV spectroscopy.