无间隙原子钢的微观结构特征和塑性应变比

采用Ｘ射线衍射的ＯＤＦ和ＬＰ分析技术，ＳＥＭ电子通道花样和蚀坑技术观测，研究了超深冲无间隙原子钢板的微观结构特征。结果表明：控制化学成分、保证基体纯净、优选工艺参数，促进强的γ－〈１１１〉∥Ｎ．Ｄ纤维织构的形成是获得优异成型性的关键。用ＣＭＴＰ方法，由ＯＤＦ织构数据从理论计算了塑性应变比（ｒ），表明ｒｍ值高达３．１８。文中讨论了再结晶织构形成机制。     

90°分束偏光镜光强分束比研究

给出了90°分束偏光镜的e,o光光强分束比的计算公式,以及光强分束比随光波长的变化曲线;在6328Å测得的光强分束比与计算值是一致的。     

In-chain functionalization by alternating anionic copolymerization of styrene and 1-(4-dimethylaminophenyl)-1-phenylethylene

Anionic copolymerizations of styrene (M₁) with excess 1-(4-dimethyl-aminophenyl)-1-phenylethylene (M₂) were conducted in benzene at 25°C for 24h, using sec-butyllithium as initiator. Narrow molecular weight distribution copolymers with M?;_n = 16.1 × 10³ g/mol (M?_w/M?_n = 1.04) and 38.2 × 10³g/mol (M?_w/M?_n = 1.05), and 24 and 38 moles of M₂ per macromolecule, respectively, were characterized by size exclusion chromatography, ¹H NMR spectroscopy and DSC. The monomer reactivity ratio, r₁ = 5.6, was obtained from the copolymer composition at complete consumption of M₁, assuming that the rate constant k₂₂ =0,i.e. r₂ =0. The polymers exhibited T_g values of 128 and 119°C, respectively, which correspond to an estimated T_g = 217°C for the hypothetical homopolymer of M₂.     

喷锚结合水泥搅拌桩在基坑支护中的应用

结合紫金苑工程实例,分析喷锚结合水泥搅拌桩在基坑支护中的应用并总结施工、监测经验。     

OFDM技术及其应用

首先对OFDM的发展以及应用做了简要的介绍,然后讨论了当前OFDM研究过程中的两个关键技术问题,最后展望了OFDM的未来发展。     

Production of biodiesel from waste fryer grease using mixed methanol/ethanol system

Transesterification of waste fryer grease (WFG) containing 5–6 wt.% free fatty acid (FFA) was carried out with methanol, ethanol, and mixtures of methanol/ethanol maintaining the oil to alcohol molar ratio of 1:6, and initially with KOH as a catalyst. Mixtures of methanol and ethanol were used for transesterification in order to use the better solvent property of ethanol and rapid equilibrium using methanol. Formation of soap by reaction of FFA present in WFG with KOH instigated difficulty in the separation of glycerol from biodiesel ester. To untangle this problem, two-stage (acid and alkali catalyzed) method was used for biodiesel synthesis. More than 90% ester was obtained when two-stage method was used compared to ∼ 50% ester in single stage alkaline catalyst. In the case of mixed alcohol, a relatively smaller amount of ethyl esters was formed along with methyl esters. Acid value, viscosity, and cetane number of all the esters prepared from WFG were within the range of the ASTM standard. Esters obtained from WFG showed good performance as a lubricity additive.     

八钢高炉无料钟炉顶的装料制度

以八钢高炉炼铁实践为依据，系统研究和分析了八钢2号和3号高炉炉顶设备装料制度对高炉冶炼的影响。认为高炉操作制度是当前高炉炼铁的主要技术之一，也是影响高炉焦比主要技术经济指标的重要因素。在原燃料和装备水平一定的条件下，合理的操作制度对高炉的技术经济指标起到决定性的作用。     

济钢350m^3高炉高富氧生产技术

分析了济钢350m^3高炉高富氧对产量,理论燃烧温度,炉况顺行状况,焦比和生产效益的影响,高富氧可提高产量,但升高焦比和高炉理论燃烧温度,一定程度上影响高炉顺行,存在富氧效益最大化的适宜富氧率.高炉生产应低富氧高喷煤,根据钢目前的情况,富氧率经2%-3%为宜.     

A Dynamic Dictionary for Priced Information with Application

In this paper we design a dynamic dictionary for the priced information model initiated by Charikar et al. Assume that a set S consisting of n elements is given such that each element has an associated price, a positive real number. The cost of performing an operation on elements of S is a function of their prices. The cost of an algorithm is the sum of the costs of all operations it performs. The objective is to design algorithms which incur low cost. In this model we propose a dynamic dictionary, supporting search, insert and delete, for keys drawn from a linearly ordered set. As an application we show that the dictionary can be used in computing the trapezoidal map of a set of line segments, a fundamental problem in computational geometry.     

多掺炼新疆渣油的催化裂化工业生产技术

兰州石化公司以加工新疆原油为主，重油收率高，平均在37％左右，所生产的重油主要靠催化裂化装置来加工，多余部分以低附加值重油出厂。随着涩宁兰天然气工程的逐渐建成，低附加值重油出厂将受到严重威胁，因此，催化裂化装置加工重油显得尤为重要。兰州石化公司炼油厂1.2Mt/a重催装置通过采用先进技术进行改造，使重油掺炼比由41.52%提高到52.20%，提高了10.68个百分点，年多加工重油14.95万t，产品收率达到79.20%以上，能够灵活调节产品结构，创造了良好的经济效益。