Statistical properties of interparticle/void distance for amorphous plastics toughening

Statistical properties of interparticle/void distance (ID) for various particle/void and dispersion types are studied in relation with toughening of plastics using computer‐generated three‐dimensional models. Particle/void size groups adopted were either of constant diameter or of log‐normal distribution. Particles/voids were dispersed at uniform‐random or flocculated with multiple clusters. It was found that IDs are (a) of approximately Gaussian distribution for particles/voids of either a constant diameter or a log‐normal distribution, when they are dispersed at uniform‐random, but (b) not of Gaussian distribution for particle/void sizes of bimodal log‐normal distribution, nor for flocculated log‐normal distribution of particles/voids dispersed with multiple clusters. It was also found that the degree of ID uniformity for a single group of log‐normally sized particles/voids is not sensitive to standard deviation of particle/void size. Mixing effect on ID properties using two groups of log‐normally distributed particles/voids with similar mean particle/void diameters was simulated. It was found that, when a significant amount (36 vol %) of particles/voids of a small mean and standard deviation of ID was mixed with a group of particles/voids of a large mean and standard deviation of ID, mean and standard deviation of ID for the mixture were not substantially lower than those of the group of particles/voids of the large mean and standard deviation of ID. It was also found that the degree of ID uniformity for the mixture of the two groups was lower than those of individual groups, indicating that the mixing has deleterious effect on toughening. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 4256–4262, 2006     

Study of Hydrodynamics,Mixing and Gas‐Liquid Mass Transfer in a Split‐Rectangular Airlift Reactor

Global hydrodynamic characteristics, liquid mixing and gas‐liquid mass transfer for a 63 L split‐rectangular airlift reactor were studied. Correlations for gas holdup and overall liquid circulation velocity were derived for the air‐water system as a function of the specific power input; these were compared to data and correlations for reactor volumes between 4.7 L and 4600 L. A partial recirculation of small bubbles in the riser was observed when U_gr > 0.03 m/s, which was attributed to the use of a single‐orifice nozzle as the gas phase distributor. The dimensionless mixing time and the overall axial dispersion coefficient were nearly constant for the range of gas flow rates studied. However, values of K_L/d_B were greater than those reported in previous studies and this is caused by the partial recirculation of the gas phase in the riser. While scale effects remain slight, the use of a gas distributor favouring this partial recirculation seems adequate for mass transfer in split‐rectangular airlift reactors.     

氯碱盐水生产过程的技术改进及效果

介绍了盐水生产过程中的各项改进措施及改进效果。改进后,精盐水质量稳步提高,同时降低了氯碱生产总成本,优化了生产环境。     

Phase Behavior and Mechanical Properties of Siloxane-Urethane Copolymer

Two series of siloxane-urethane copolymers were prepared from polydimethylsiloxane (PDMS) with a molecular weight of 1000 or 1800 which was used as a soft segment, 4,4′-diphenylmethane diisocyanate (MDI) and 1,4-butanediol (1,4-BD). Differential scanning calorimetry (DSC) demonstrated that the position (T_gs) and breadth (ΔB) of soft-segment glass transition of copolymers remained constant as the hard-segment content increased. Heat capacities at soft-segment glass transition of the copolymer (ΔCp) were 0.195∼0.411 J/g^○C and heat capacities of pure PDMS (ΔCp₀) were 0.571∼0.647 J/g^○C, leading to the various ΔCp/ΔCp₀ ratios. The ΔCp/ΔCp₀ ratios decreased as the increasing of hard-segment content, showing poor phase separation. The FTIR spectrum confirmed the occurrence of hydrogen bonding in ether end-group of pure PDMS. The ether group of the soft segment led to interfacial mixing between soft and hard segments. The tan δ of the soft segment determined by dynamic mechanical testing (DMA) also identified the mixing of soft and hard segments. The mechanical properties of the copolymer were directly related to either the soft and hard segment contents or the chain lengths of soft and hard segments. The hard segment that reinforced the soft segment and interfacial thickness between soft and hard segment dominated the mechanical properties.     

螺杆挤压机混合能力的分析

分析螺槽中熔体的流动状态 ,运用加权平均总应变来评价螺杆挤压机的混合能力 ,进而提出提高混合能力的途径。对于单螺纹螺杆 ,稍长的计量段 ,稍浅的计量段螺槽及较高的螺杆转速 ,有利于混合作用 ;开发新型螺杆 ,如犁钉分流混合螺杆 ;研制高效混合型螺杆挤压机 ,如球窝型高效混合型螺杆挤压机     

Experimental Simulation of the Reactor Section of Fluid Cokers: Comparison of FCC and Fluid Coke Particles

The hydrodynamics of fluid cokers were studied in a pressurized fully cylindrical cold model of diameter 483 mm, geometrically and dynamically scaled down by a factor of ～20 from commercial units. Differential pressure fluctuations, voidage distributions, solids momentum flux distributions and steady state gas mixing behaviour in the reactor section are compared for the same operating conditions with two kinds of particles, FCC and fluid coke. The voidage distributions and core‐annular flow structures in the reactor section were similar enough that either FCC or fluid coke particles can be used for cold modelling of fluid cokers.     

Étude expérimentale du mélange réactif au sein d'un réacteur torique ondulé (RTO)

Reactive mixing in a wavy torus reactor (WTR) has been examined experimentally. Its performances are compared to these of two other reactors: a plane torus reactor (PTR) and a baffled stirred tank reactor (BSTR). hydrodynamics of mixing has been studied using a plug flow model with axial dispersion for the WTR and PTR. The effect of axial dispersion on the kinetic of a chemical reaction was then analysed for the WTR, PTR and BSTR. Mixing times were slightly longer for the WTR due to a weaker axial dispersion. We also noticed an improvement of the convertion rate for low dissipated power.     

Energy Efficiency of Two‐Phase Mixing in a Modified Bubble Column

Energy efficiency for gas liquid mixing in a modified downflow bubble column reactor has been analyzed in this paper. Efficiencies of the different parts of the bubble column have been assessed on the basis of energy dissipation. Prediction of the energy dissipation coefficient as well as energy utilization efficiency due to gas‐liquid mixing as a function of different physical, geometric and dynamic variables of the system has been done by correlation method. The distribution of energy utilization in the different zones of the column has also been analyzed. Experiments were carried out with air‐water and air‐aqueous solutions of carboxy methyl cellulose with different concentrations.     

强化单螺杆挤出机内层流混合的方法

综述了单螺杆挤出机内聚合物熔体层流混合机理的研究进展，对提高混合的措施进行了分析总结，指出了进一步强化混合效果的方法。     

盐水介质铝合金复合缓蚀剂的研究

以葡萄糖酸盐、醇胺磷酸酯、苯并三氮唑(BTA)、表面活性剂、添加剂等合成了盐水介质铝缓蚀剂并用腐蚀失重法进行了评价。在22.5％盐水介质中,葡萄糖酸钙:苯并三氮唑:硫酸锌:醇胺磷酸酯:十二烷基苯磺酸钠=1.0:1.0:0.6:0.2:0.05,50℃时,铝缓蚀率可达95％以上。