发酵液絮凝过程絮凝体微尺度与分离性能

为探索发酵液絮凝分离过程规律以提高分离效率,本文在微观层面上研究发酵液絮凝过程中的剪切力、絮凝体尺度对絮凝体过滤分离效果的影响。以小诺霉素发酵液为研究对象,在絮凝过程中改变絮凝体所受的剪切力,使用激光粒度分析仪在0.02～2000 μm尺度内测定不同剪切力下絮凝体的粒度及粒度分布,并测定絮凝体的过滤速率及沉降速率。实验结果显示：絮凝体的粒度随剪切力的增大而减小,絮凝体的粒度分布宽度随剪切力的增大而增大;絮凝体的沉降分离速率随絮凝体粒度的增大而增大;在适度的剪切力下絮凝体有一适度的粒度及粒度分布宽度和较大的密实度,此时絮凝体的过滤分离速率有一最大值。实验结果表明：絮凝过程中的剪切力显著影响絮凝体的粒度、粒度分布和密实度,从而显著影响絮凝体的过滤速率及沉降速率。     

微小流化床流化特性分析

在内径4.3, 5.5, 10.5, 15.5, 20.5和25.5 mm的6个气固微小流化床中,考察了石英砂和不同粒径的催化裂化催化剂的流化特性. 研究了流化床尺寸、颗粒及流化介质物性对微小流化床床层压降及最小流化速度的影响. 结果表明,不同颗粒及流化介质的微小流化床床层压降实验值均小于计算值. 传统的压降关联式不能直接用于微小流化床. 其最小流化速度随床径减小呈指数增大,在高径比1:1~3:1范围内,最小流化速度随料高增大近似呈线性增大,其增大速度随床径增大而变缓. 基于实验数据得出了微小流化床最小流化速度的关联式.     

关于微尺度理论

随着纳米材料、微器件、微结构和微系统研究的深入发展及其应用,与微尺度效应有关的理论和技术成为当前的研究热点,推动着微尺度理论的形成和发展.从微尺度及其判据出发,对微尺度理论的几个主要学科做了简要介绍,指出了需要解决的关键问题和研究方法.     

Evaluating thermal and thermooxidation stability for lubricating oils via microscale methods

Differential thermal analysis (DTA) and thermogravimetry (TG) methods have been developed to evaluate the thermal and thermooxidation stability of different lubricating oils. Measurements are carried out either by heating the oil sample at a constant rate (direct programme) or by keeping it at a fixed high temperature (isothermal programme). Oxygen at a constant flow rate is used for thermooxidation measurements. Tested samples included different viscosity grades: neutral base oils, unadditivated lubricating oil blends, and industrial oils. The mechanism of thermal decomposition for ZDDP and the estimation of its optimum concentration was also considered.     

地方院校开展微型有机化学实验教学初探

选取几个典型的基础有机化学实验,通过常量、半微量、微量的比较实验,揭示了微型实验教学的一些优点和存在的问题,并提出了解决的方法。确认微型实验是实验改革的方向。     

不同润湿表面液体沸腾的分子动力学模拟

采用分子动力学方法研究纳米尺度下液氩在过热基板上的沸腾过程。通过调节固液间相互作用的方式改变壁面润湿性,模拟并分析了壁面润湿性对沸腾过程中能量传递和液体运动情况的影响。结果表明：不同润湿性表面均会发生固液分离的现象,但是固体表面附近吸附的氩原子数密度随润湿性增强而增大;润湿性较强时,液体的能量上升快,热通量高,液体内部温度梯度大,发生固液分离时间早,系统中氩的温度和能量低,上升过程中液氩密度、厚度变化小;润湿性较弱时,液体的能量上升慢,热通量小,液体内部温度梯度小,发生固液分离时间延后,系统中氩的温度、能量更高,上升过程中液氩密度、厚度变化较大。下部气体压力整体上大于上部气体压力,发生固液分离时润湿性越强的表面上液体上下压差越大,首次上升过程能达到的高度越高,所需时间越短。     

微尺度涡旋位错:宝石晶体又一重要的生长机制

采用原子力显微镜、干涉显微镜对水热法合成蓝宝石和天然绿柱石等宝石的表面微形貌进行了研究. 通过对宝石晶体中微尺度涡旋位错的表征和示踪, 初步证实涡旋位错是某些宝石矿物晶体又一重要的生长机制. 这暗示, 微尺度成矿流体的涡旋运移与晶相涡旋成核可能是地球成矿动力学体系中某些物质运动和存在的又一种重要的形式. 对晶体生长机理的研究现状和发展趋势予以了讨论.     

Getting a Grip on the Undrugged: Targeting β-Catenin with Fragment-Based Methods

Aberrant WNT pathway activation, leading to nuclear accumulation of β-catenin, is a key oncogenic driver event. Mutations in the tumor suppressor gene APC lead to impaired proteasomal degradation of β-catenin and subsequent nuclear translocation. Restoring cellular degradation of β-catenin represents a potential therapeutic strategy. Here, we report the fragment-based discovery of a small molecule binder to β-catenin, including the structural elucidation of the binding mode by X-ray crystallography. The difficulty in drugging β-catenin was confirmed as the primary screening campaigns identified only few and very weak hits. Iterative virtual and NMR screening techniques were required to discover a compound with sufficient potency to be able to obtain an X-ray co-crystal structure. The binding site is located between armadillo repeats two and three, adjacent to the BCL9 and TCF4 binding sites. Genetic studies show that it is unlikely to be useful for the development of protein–protein interaction inhibitors but structural information and established assays provide a solid basis for a prospective optimization towards β-catenin proteolysis targeting chimeras (PROTACs) as alternative modality.     

磁共振系统中微型射频功率电桥的设计与测试

射频前端系统是影响核磁共振系统成像的关键部件之一。基于射频功率电桥的设计原理,在传统的FR4基板上采用集总工艺方法,实现微型化的射频功率电桥,仿真和测试结果显示,微尺度功率电桥的耐流、耐压性能优异,信号精度高,同时在核磁共振系统的工作频率下,小信号和大信号的输出损耗很小,完全符合核磁共振系统对大功率电桥的需求,整体的性能优异。     

Micro-scale Method for Determining Foaming Properties of Protein

A 5% protein suspension (4 mL) was whipped in a modified 50-mL centrifuge tube using a tissumizer equipped with a flat-bottom generator. Drainage time at 50% liquid weight and the weight of the foam formed/unit volume were used for calculating foam stability and foam overrun, respectively. The foaming properties of a variety of milk proteins were determined using this method. This method distinguished differences in foaming properties among the proteins. Values for overrun confirmed published results. Compared with standard methods, this method required much less sample (about 1/20) and less measuring time (about 1/5 to 1/10).