承德围场县西山庙台沟泥石流危险性分析

庙台沟位于河北省承德市围场县县城西山,曾发生山洪泥石流灾害.为了掌握庙台沟泥石流的运动变化规律,更有效地减小泥石流的危害,通过对庙台沟的地形地貌、物源、水源的勘察分析,计算得出了泥石流的容重、流量、流速、冲击力等参数;针对其形成条件和基于数量化理论,对该泥石流的危险性进行了分析及评估,进而为相关工程的评价及防治提供参考.     

黄河小浪底调水调沙试验数学建模简

黄河小浪底调水调沙是治黄管理的重要措施。通过对实测流量和排沙量变化过程的分析,依据插值和拟合数学理论,结合matlab得到排沙量与时间、流量的函数关系式,并进行数值分析验证,对调水调沙试验的效果进行了理论分析。     

High-voltage surge protection by a varistor-filled air gap

The electric discharge across a varistor granule filled air gap under a fast-rising voltage pulse was investigated for surge protection applications. The effects of temperature and pressure on the arc and the electrical conduction were analyzed by the characteristic changes in voltage waveforms triggered by a fast-rising high voltage pulse. In addition to the gap size, experimental results show that competing mechanisms among arc conduction, conduction through the varistor granule network, thermionic emission from Joule heating at granule-to-granule contact points, and the magnitude of the switching voltage dictate the maximum surge protection voltage for the filled air gap. Experimental evidence indicated that accumulated degradation was created at small contact points between varistor granules by repetitive assaults from longer duration, high voltage pulses. The uniqueness of using varistor over other dielectric granules in an air gap for surge protection is identified and discussed.     

基于局部间隙状况电火花磨削周期的伺服策略

分析了现有的一些电火花磨削伺服策略存在的问题，提出了基于周期性和局部性特点的伺服策略。该策略以回转周期为控制周期，以局部间隙状况为控制的依据，通过极端局部间隙状况控制极端局部表面加工状态，从而控制整个表面优质高效的加工，具有快速修圆和一定的自动寻优功能。     

Microstructure of a nitrided steel previously decarburized

In this study the effects of a surface-controlled decarburization on the structure of a nitrided steel are analyzed. Samples of a quenched and tempered 42CrMo4 steel were decarburized by heating in air at different depths and submitted to gaseous nitriding. After decarburization and nitriding, the microstructure of surface layers was investigated by optical microscopy (OM) and scanning electron microscopy (SEM). The nitrogen and carbon profiles in the diffusion layers were determined by SEM equipped with a wavelength dispersive spectrometer (EPMA-WDS) and by glow discharge optical spectrometry (GDOS). The effect of nitriding was determined by microhardness measurements. Our results indicate that a previous decarburization only slightly affects the surface hardness, but reduces the conventional nitriding depth. The decarburization also favors the nitrogen take-up and produces increased nitrogen concentrations in the compound layer and in the narrow zone beneath it.     

电火花铣削中电极损耗及补偿的几何描述方法

提出了电火花铣削加工的基于数学模型的电极分解加工补偿法，即通过将电火花铣削加工过程划分为两个阶段——型腔侧面轮廓加工和底面的加工，这样就简化了放电状态的检测和电极补偿运动。在分别对侧面和底面加工过程分析的基础上，建立了侧面轮廓和底面加工的电极损耗和补偿的数学模型，为电极自动在线补偿提供了理论基础。     

利用双层辉光放电形成Mo-N硬质镀层

用双层辉光放电在钛合金Ti6Al4V表面形成了Mo-N硬质镀层。用X射线衍射仪和纳米压入仪分别对镀层的相结构、硬度和弹性模量进行了研究，并用涂层压入仪对镀层与基体间的结合强度进行了测定。结果表明：Ti6Al4V表面形成了均匀的Mo—N硬质镀层，镀层厚约10μm，由面心立方结构Mo2N化合物构成；Mo2N硬质镀层的硬度和弹性模量分别为13．80GPa和261．65GPa;镀层与基体间具有较好的结合强度。     

The Microstructure and Mechanical Properties of the Low Carbon Microalloy Steel by High Voltage Electropulse Heating

The low carbon microalloy steel samples were heated to different temperatures by high voltage electropulse discharge heating method. The temperature of sample increases with the discharge current density. Microstructures were observed by using scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Results show that coexist microstructure of ultrafine ferrite grain and martensite can be obtained by proper high voltage electropulse discharge heating process parameter. The tensile testing indicate that better mechanical properties were obtained, including 758MPa yield strength, 796MPa ultimate strength and 12% total elongation.     

钛合金表面双层辉光离子渗铝的研究

利用双层辉光渗金属技术，以铝为源极、TC4(Ti-6Al-4V)为阴极、氩气为工作气体，依靠辉光放电和不等电位空心阴极效应在TC4表面形成合金层。采用X射线衍射和辉光放电光谱分析了合金层的相组成及渗层内Al元素的分布．并对其进行硬度测试。结果表明：渗层由Ti3Al和α-Ti组成；铝的含量可达18％；渗层厚度可达13μm；其硬度比经渗铝处理后的有了较大程度的提高。     

Pt/onion-like fullerenes as catalyst for direct methanol fuel cell

Onion-like fullerenes synthesized by arc discharge in water were used as support of Pt nanoparticles as electrocatalytic materials for direct methanol fuel cell. Uniform platinum nanoparticles with the average diameter of about 4.3 nm were well dispersed on the surface of onion-like fullerenes by impregnation-reduction method. The morphologies and microstructures of the as-prepared composites were studied by means of XRD and TEM. Electrochemical analysis shows that this kind of nano material may be an excellent candidate to be used as the support of catalyst for methanol electrochemical oxidation.