Thermodynamic assessment of MCl–YCl3 (M=Na,K, Rb,Cs) systems

Thermodynamic properties and phase diagrams of the MCl–YCl₃ (M=Na, K, Rb, Cs) systems were reassessed by using the CALPHAD method with the latest phase diagram data. A two-sublattice ionic solution model (M⁺)_P(Cl⁻, ${\mathrm{YCL}}_6^{3-}$, YCl₃)_Q reflecting the ionic behavior of the components was adopted to describe the liquid phase in the systems. A new set of optimized model parameters was found, and the calculated phase diagrams and enthalpies of mixing have good agreement with experimental data. The calculated liquidus near to YCl₃ side agrees much better with experimental data compared with previous work. In consideration of high and low temperature modifications as well as stability of intermediate compounds, Gibbs energies of formation of these compounds evaluated in the present work are more reasonable.     

离子膜使用过程中起泡的原因及危害

分析并列举了离子交换膜在使用过程中鼓泡的原因，阳极液质量浓度；pH值；阴极液质量浓度；电流密度；开停车及盐水质量等因素都可以造成膜鼓泡，形成针孔。提出了相应的预防措施。     

均分散TiO2纳米晶的制备及应用研究进展

介绍了不同晶形TiO2纳米晶的制备、应用;对TiO2纳米晶的合成方法以及相关材料的应用进展,尤其是均分散TiO2纳米晶的制备技术进行了综述。     

新型吸-放热复合发泡剂的特性分析与应用

对自制的新型吸－放热复合发泡剂ＨＣＢ－ＮＸ的分解动力学和热力学特性进行了研究,同时对采用该发泡剂进行硬质聚氯乙烯低发泡挤出的特性及泡孔结构进行了分析。     

The effect of intermetallic hydrogen acceptor on catalytic aromatization of propane

The effect of the hydride-forming intermetallic compound Zr₂Fe on the aromatization of propane over high-silica zeolites of CVM type (Russian equivalent of ZSM-5) modified by Zn, Ga or Pt cations has been investigated. Aromatics yield and selectivity of aromatization are shown to increase essentially as a result of releasing hydrogen elimination by the intermetallic acceptor. The effect of hydrogen acceptor on propane conversion and product distribution appeared to be different depending on the composition of the catalyst used. Possible changes in the reaction mechanism in hydrogen removal conditions are discussed.     

Molecular association complex of urea with polyethylene: 3. Structural studies of the complex

The crystal structure of urea-polyethylene complex in the hexagonal form, obtained by one of our preparation methods, is analysed by X-ray power diffractometry. In this analysis, the fixed molecular parameters of urea are used, and three models with respect to rotational disorder of the guest polyethylene molecule are assumed. It is shown that the host lattice structure constructed by urea molecules is essentially the same as that of urea-n-paraffin complex. Effects of the disorder structure of the guest on X-ray scattering of the complex are presented. However, there is a difficulty in identifying the disorder structure by X-ray analysis. With the aid of a potential energy calculation between the hexagonal urea tunnel and the guest molecule, a rotational disorder model is preferred.     

有机磷化物制备羟基磷灰石工艺条件的探讨

探索用有机磷化物制备羟基磷灰石的工艺条件：采用硝酸钙、氨水、磷酸三丁酯为原料进行正交对比研究，优化得到了制备较佳羟基磷灰石的工艺条件。优化的工艺条件为：原料中Ca／P（molar ratio）1．67；Ca（NO3）2、4H2O／NH3H2O（g／g）为0.99；烧结温度为850℃：恒温时间为5h，并对合成的样品进行了化学和红外光谱的分析。     

A helical drive in-pipe robot based on compound planetary gearing

The modern society is fuelled by very comprehensive grids of gas and liquid pipelines. In recent years, various in-pipe robots have been developed for inspection and maintenance tasks inside such pipes. In this paper, a novel in-pipe robot is proposed and developed for gas/oil well interventions at thousands of meters downhole. Due to the nature of such intervention, in-pipe robot design must be capable of carrying a very large payload, as large as 2500?N inside a pipe with diameter as small as 54?mm. The proposed design concept is based on a compound planetary gearing system. One of the major novelties of this design is the use of pipe wall as a ring gear for one stage of the compound planetary gear system; the other novelty is the generation of helical angle when the planetary gears are expanded to press on the pipe wall. The proposed concept is compact, efficient, and has never been reported before. In this paper, the helical angle, the velocity, and load capability of the proposed system will be analyzed. The load transportation capability of the proposed robot is also measured based on an experiment. Initial data have shown great potential in carrying large payloads.     

我国烧碱生产技术概况

介绍了我国氯碱行业近几年来的发展情况：分析了我国烧碱生产的工艺技术现状。指出了为缩短与世界先进国家的差距需要加快开发关键设备和高性能的离子膜，加强管理。     

PE-LLD／EVA／Mg（OH）2／复合阻燃剂高效无卤阻燃体系的研究

采用线形低密度聚乙烯/乙烯-醋酸乙烯共聚物作为复合材料主体,表面处理过的氢氧化镁(Mg(OH)2)为主阻燃剂,以微胶囊化红磷和自制硅类阻燃剂为核心的复合阻燃剂为阻燃增效剂,重点探讨了Mg(OH)2和复合阻燃剂的阻燃效果。结果表明,Mg(OH)2与复合阻燃剂并用具有良好的协同效应,当Mg(OH)2用量40份,复合阻燃剂5～7份时,可获得较高的氧指数,垂直燃烧试验通过FV0级,且材料抗静电能力提高,力学性能、加工性能较好。