The high temperature phase transitions of orthorhombic La0.95MnO3

The high temperature phase transitions of orthorhombic La_0.95MnO₃ from room temperature to 1273 K were studied using high temperature XRD technique in air. Two-phase transitions were found in temperature ranges, 373–473 K and 973–1273 K, respectively. The crystal symmetry increases from orthorhombic to rhombohedral then cubic, while the second transition was not completed in the observation of the present study. The first transition could be due to the depression of Jahn–Teller distortion, while the second one could be caused by the ionic oscillation at high temperature. The lattice thermal expansion coefficients of rhombohedral La_0.95MnO₃ from 473 to 973 K were also calculated using lattice parameters.     

石墨化率不同的自焙炭块的热膨胀

采用精密垂直拉杆膨胀仪在１４～１０００℃范围内测量了具有不同石墨化率的自焙炭块的相对热伸长量，并由此获得了热线膨胀系数α。结果表明：石墨化率一定时，α值在较低温度下随温度升高而增加，在较高温度下，α值随温度变化不明显；恒温时，石墨化率越高，α值越低。讨论了单位热应力下的弹性模量概念     

First-principles calculation of phase equilibria and phase separation of the Fe-Ni alloy system

Theoretical investigation of the phase equilibria of the Fe-Ni alloy has been performed by combining the FLAPW total energy calculations and the Cluster Variation Method through the Cluster Expansion Method. The calculations have proved the stabilization of the LIE phase at 1：3 stoichiometry, which is in agreement with the experimental result, and predicted the existence of L1 0 as a stable phase below 550 K; this L1 0 phase has been missing in the conventional phase diagram. The calculations are extended to the Fe-rich region that is characterized by a wide range phase separation and has drawn considerable attention because of the intriguing Invar property associated with a Fe concentration of 65%. To reveal the origin of the phase separation, a P-V curve in an entire concentration range is derived by the second derivative of free energy functional of the disordered phase with respect to the volume. The calculation confirmed that the phase separation is caused by the breakdown of the mechanical-stability criterion. The newly calculated phase separation line combined with the L1 0 and L12Eorder-disordered phase boundaries provides phase equilibria in the wider concentration range of the system. Furthermore, a coefficient of thermal expansion （CTE） is attempted by incorporating the thermal vibration effect through harmonic approximation of the Debye-Gruneisen model. The Invar behavior has been reproduced, and the origin of this anomalous volume change has been discussed.     

中频炉酸性炉衬使用寿命的探讨

通过对炉衬材料的选择,作用机理及影响石英砂炉衬材料寿命的相关因素的阐述,说明了SD-T-A石英砂干振料可提高中频炉酸性炉衬使用寿命的原因.     

高校扩招背景下大学生心理问题易发事件及其相关因素研究

本研究用高校学生心理问题调查问卷对 16 2 4名大学生进行调查 ,并用SCL - 90量表对其中 5 80名学生进行测评 ,同时测量学生的特质性应对方式 ,探讨高校扩招背景下大学生的心理问题易发事件及相关因素。扩招后大学生自感压力最大的心理问题易发事件是感到竞争激烈、择业困难、考试不过关等 ;大部分易发事件都和SCL - 90总分及各因子分存在着极显著相关 ;应对方式和易发事件及SCL - 90总分、各因子分存在着极显著的相关。扩招后和竞争、就业、学业相关的心理问题易发事件已成为影响大学生心理健康的首要因素     

镁渣膨胀性机理试验研究

通过镁渣形成过程、组成、粉化、颗粒分析和安定性试验,研究了镁渣产生体积膨胀性和膨胀滞后性的机理,提出了减轻或消除其膨胀性和膨胀滞后性危害的方法和措施,为镁渣在建筑、交通、水利等工程领域中的应用提供理论依据和指导。     

Development of new device for measuring thermal stresses

In recent years, numerous analytical and experimental researches have been performed on the prediction of thermal stresses in mass concrete structures. However, due to the difficulty of the problem, limitations still exist for both analytical and experimental methods of measuring thermal stresses in mass concrete. In this research, a new experimental device measuring thermal stresses directly in a laboratory setting is developed. The equipment is located in a temperature chamber that follows the temperature history, which has been previously obtained from temperature distribution analyses. Thermal forces are measured continuously by two load cells in the device. The results show that the thermal stresses estimated by the newly developed device agree well with general stress variations in actual structures.     

复合材料夹层结构产品固化变形分析

本文讨论产生复合材料产品固化变形的主要原因是树脂收缩引起的各方向上不同的线膨胀系数具体分析了复合材料夹层结构的的固化变形，经技术上的改进解决了固化变形，以满足产品的设计要求。     

A new approach to the epsilon expansion of generalized hypergeometric functions

Assuming that the parameters of a generalized hypergeometric function depend linearly on a small variable ε$\epsilon$, the successive derivatives of the function with respect to that small variable are evaluated at ε=0$\epsilon =0$ to obtain the coefficients of the ε$\epsilon$-expansion of the function. The procedure, which is quite naive, benefits from simple explicit expressions of the derivatives, to any order, of the Pochhammer and reciprocal Pochhammer symbols with respect to their argument. The algorithm may be used algebraically, irrespective of the values of the parameters. It reproduces the exact results obtained by other authors in cases of especially simple parameters. Implemented numerically, the procedure improves considerably, for higher orders in ε$\epsilon$, the numerical expansions given by other methods.     

三相流化床的流体力学特性研究

利用空气、水和玻璃珠颗粒为工作介质,对三相流化床流态化操作的流体力学特性进行了研究,主要研究了气体速度、液体速度、颗粒投加量与气含率的关系,以及气体速度与床层高度及气泡直径的关系。