Energy minimization and design for testability

The problem of fault detection in general combinational circuits is NP-complete. The only previous result on identifying easily testable circuits is due to Fujiwara who gave a polynomial time algorithm for detecting any single stuck fault inK-bounded circuits. Such circuits may only contain logic blocks with no more thanK input lines and the blocks are so connected that there is no reconvergent fanout among them. We introduce a new class of combinational circuits called the (k, K)-circuits and present a polynomial time algorithm to detect any single or multiple stuck fault in such circuits. We represent the circuit as an undirected graphG with a vertex for each gate and an edge between a pair of vertices whenever the corresponding gates have a connection. For a (k, K)-circuit,G is a subgraph of ak-tree, which, by definition, cannot have a clique of size greater thank+1. Basically, this is a restriction on gate interconnections rather than on the function of gates comprising the circuit. The (k, K)-circuits are a generalization of Fujiwara'sK-bounded circuits. Using the bidirectional neural network model of the circuit and the energy function minimization formulation of the fault detection problem, we present a test generation algorithm for single and multiple faults in (k, K)-circuits. This polynomial time aggorithm minimizes the energy function by recursively eliminating the variables.     

多缝式烧嘴点火器在攀钢烧结生产中的应用

多缝式烧嘴点火器具有燃烧效率高，火焰长度易调，炉膛温度分布合理等优点，经工业试验证明，该点火器能满足攀钢烧结点火工艺要求，并有明显节能效果。     

Stored energy analysis of Zn—5Al eutectic alloy in superplastic deformation

The stored energy and the energy release during SPD(superplastic deformation)of a Zn-5Al alloy were studied.The alloy after rolling process gains more stored energy,and the as-rolled speciment can obtain maximum elongation and minimum flow stress without hot loding treatment before SPD.Experimental results show that stroed energy release process is along with SPD process and is also an impetus to SPD.The as -rolled Zn-5Al alloy has 48J/mol stored energy which was measured with DSC(differential scanning calorimeter)and conforms well to the calcuated value.The as-rolled Zn-5Al alloy after SPD with an elongation of 2500% releases 112J/mol stored energy,Analysis shows that the strain rate is in direct ratio to the rate of stred energy release.     

高能气体压裂联作技术进展

国内高能气体压裂增产技术已经由单一的有壳弹、无壳弹、液体药、可控脉冲等高能气体压裂,进展到与射孔、水力压裂、酸化、化学解堵等技术相联作的综合压裂阶段。分别对高能气体压裂与射孔、水力压裂和化学解堵等联作技术的基本原理、现场试验、作业效果等进行了介绍。高能气体压裂已发展成一种基本成熟的、综合性油气田增产改造新技术。     

国产CN—31催化剂与ICI65—2催化剂工业应用的比较

国产轻油预转化催化剂与进口催化剂相比,具有性能相当、价格低廉、供应方便等优势。国产预转化催化剂需在较高的液空速、温度较低的条件下实现烃类转化反应,生成含甲烷60%以上的富气。采用国产催化剂能明显反映性能价格比。文章对两种催化剂进行了工业应用比较和分析。     

A load dispatch method using fractional programming and semidefinite programming

This paper describes a load dispatch method which minimizes power cost—[fuel cost]/[electric output]—for a power system with thermal plants and energy storage facilities. The proposed method employs fractional programming to convert a minimization problem with fractional objective function to a series of quadratic minimization problems, and semidefinite programming to solve converted problems. The method provides the optimum time‐dependent power output/input and storage level of energy storage facilities as well as time‐dependent power output of thermal plants. The method has been applied to a power system with five thermal plants, two energy storage facilities of various performances, and five load demands. The optimum load scheme of four time mesh points is obtained for the thermal plants and energy storage facilities. The fractional programming successfully converges the optimal scheme through a few iterations. The semidefinite programming deals with a variable matrix of 164 dimensions, and 185 inequality constraints. © 2001 Scripta Technica, Electr Eng Jpn, 138(2): 49–58, 2002     

Energy absorption in splitting square metal tubes

This paper presents an investigation into the energy absorbing behaviour of axially splitting square metal tubes. Tubes 50 mm square with a variable thickness were pushed slowly against rigid pyramid shaped dies, which had various semi-angles. By pre-cutting 5 mm long slits at the four corners, the tube splits along the corners and curls outward with a certain radius at a constant force. In this energy dissipating system, there are three components: tearing energy, plastic deformation energy and frictional energy. Theoretical analysis of the three energy components is presented. Curl radius is also studied in detail. Good agreement between experiments and theory is obtained. The results show that tubes which both split and curl may be used as efficient, long stroke energy absorbing devices.     

珠海拱北口岸联检大楼空调设计

介绍了珠海拱北口岸联检楼空调系统的设计特点，提出了按建筑类型、功能进行空调系统分区的设计方法，强调应根据建筑物的具体情况设置设备用房，以保障空调系统正常有效地运行。     

Application of SiC-Si functionally gradient material to thermoelectric energy conversion device

Because of its high–temperature chemical stability, SiC ceramic is a promising material for high-temperature device applications such as thermoelectric energy converters. However, the electrical conductivity of SiC ceramic is too low for it to be used as a thermoelectric energy converter at the cold junction. Therefore, we propose a SiC-Si functionally gradient material (FGM) in order to improve the electrical conductivity of the SiC ceramic at the cold junction. An SiC rod was fired in a temperature gradient furnace. One end of the SiC rod was maintained at 2473 K and the other end was maintained at 1973 K for 30 min. After firing, the porous SiC edge fired at 1973 K was dipped into molten Si in order to infiltrate molten Si into the porous SiC. The microstructure of the FGM is classified into three regions: the SiC-Si composite material; the porous SiC ceramic; and the densified SiC ceramic. The electrical conductivity, the Seebeck coefficient and the thermal conductivity for each region of SiC-Si FGM was measured at 300 K; a figure of merit was calculated. The figure of merit of the SiC-Si FGM at the cold junction, at room temperature, was 10⁸ times higher than that of a nongradient SiC ceramic.     

Estimation of true dihedral angles and relative grain boundary energies in polycrystals using the disector

Relative grain boundary energies can be simply related to true dihedral angles, which are the angles between grain boundary planes meeting at triple edges in polycrystals. Some limited efforts in the measurement of true dihedral angles have used the technique of serial sectioning, which is usually cumbersome and time consuming. In this study the three‐dimensional probe called the ‘disector’ has been employed to evaluate true dihedral angles. This probe, combined with automated image processing, introduces precision as well as efficiency, overcomes the disadvantages of the two‐dimensional probe and is far less tedious and less complicated than serial sectioning. It is shown that the technique is relatively simple and therefore can be applied to obtain a significantly large and accurate statistical sample of true dihedral angles. The application of this method is demonstrated by evaluating the triple junction geometry and the associated relative grain boundary energies in polycrystalline 316L austenitic stainless steel.