Experimental Study of Concrete Subjected to Explosive Loading

The main subject of this paper is to demonstrate the response of structural concrete to different imposed strain rates. Attention is focused on the strain rate about 10^-2 s ^-1>, where some technical difficulties are experienced when an exact determination of mechanical properties for quasi-brittle materials is attempted. The design of a measurement system, which realizes computer acquisition, analysis, and graphic representation of data, is also presented.     

Strength of Metals at High Strain Rates

Results of metal testing in impact tension–compression and indentation are analyzed. As the analysis of these data demonstrates, the strength of metals increases greatly with strain rates and at moderate indentation rates. At high indentation rates, a decrease in the specific energy (per unit volume of a displaced material) necessary for the formation of a conical cavity was observed. The account of the effects of viscosity, temperature increase upon plastic deformation and its localization can be used to explain the above phenomena.     

Optimal size,hydraulic retention time and volatile solids loading rate of biogas unit using water hyacinth

With a view to evaluate the effects of hydraulic retention time and volatile solids loading rate on methane production using water hyacinth, experiments were conducted in a 160 dm³ capacity, well-mixed continuous digestion unit at ambient temperature. The optimal design of biogas plant using water hyacinth was elucidated, to provide a unit giving a maximum methane yield of 0.16 nm³ kg^?1 volatile solids added, which was 60% greater than the conventional plant using cowdung. The calculations of optimal design factors were based on reactor size, hydraulic retention time and volatile solids loading rate; considerations were made of capital cost, running costs and operational revenue.     

连铸温度场数值模拟及冷却水参数优化

由于用实验方法来研究工艺参数对铸坯温度场的影响较困难,故而提出了一种在冶金冷却条件指导下的启发式GA(遗传算法)数值模拟优化方法,为优化工艺参数提供了理论依据,并在优化基础上采用MIMO(多输入多输出)系统PID(比例积分微分)控制器实现了二冷段配水的优化控制,改善了铸坯的质量.     

铜冶炼企业金银回收率计算方法的选择

针对某厂金、银总平衡情况，分别采用平衡法和连乘法计算金、银回收率，得出两种不同的结果，文章分析了产生不同结果的原因，探讨不同的企业如何根据自身特点，选择与之相适应的金、银回收率计算方法，以便准确地反映本企业的回收率实际水平。     

从引进610ERW机组透视东西方技术价值观念的差异

我国引进的610ERW机组大多来自欧美和日本等国,其工艺参数和设备结构有所不同,例如成型机、高频焊机、中频正火装置、连续与非连续生产方式、全线设备(入口段、成形段和精整段)组成的匹配模式以及设备国产化的程度等.通过对东西方有关高频电阻焊技术价值观念差异的分析,总结我国引进610ERW机组的经验,为今后企业引进、消化引进和技术创新提供参考.     

基于连续性扩散流的湿地表面水流动力学模型

受表面密生植被的影响,湿地表面流总是处于高阻力、低流速状态。湿地表面流的水流动力学方程中,其水流加速度项相对于地表高密度植被造成的高阻力项相比,可以忽略。由此,以水流连续性方程和忽略加速度项的水流动力学方程为基础,构建基于连续性扩散流的湿地表面流动力学模型。该模型是一个抛物型偏微分方程,相对于描述一般径流流态的圣维南双曲型偏微分方程组而言,其求解过程相对容易。模型中的表面流流量采用修正的曼宁方程描述,表面糙率采用已有经验公式,数值计算方法采用六点差分格式。模拟结果表明,该模型能够体现湿地表面流的高阻力、低流速特征。水深越浅,水流模式变化越慢,水深越大,表面流受植被阻力越小,水流模式变化越快。     

电加热柔性连续抽油杆动态特性的计算机模拟

根据电加热柔性连续抽油杆的特性、参数及井下基本工况,建立了三级混合抽油杆柱的有限元模型。运用有限元软件对混合杆柱的动态特性进行计算机模拟,得到各关键点位移、速度随时间变化曲线,以及计算机模拟的地面示功图,为抽油机、抽油杆设计和井下故障诊断提供理论依据。与传统电加热空心抽油杆相比,电加热柔性连续抽油杆在降载和节能方面优势显著。     

鞍钢1780mm热轧生产线"三电"工程施工概述

概述了鞍钢1780mm生产线技术改造工程中供电、传动及自动控制系统的构成、安装及调试技术要点,以及技术经济效果评述,可供同类工程施工参考.     

炼钢工序的变化与挑战——柳钢"十五"期间炼钢的进步与工艺特点

简述了炼钢工序在柳钢"十五"期间工艺和装备的变化及其特点.对工序变化进行了初步分析.