复合乳化沥青的粘附性试验方法研究

鉴于目前使用的阳离子乳化沥青粘附性试验方法难以有效评价复合乳化沥青粘附性，通过试验研究并综合考虑乳化沥青施工和路用实际情况，提出了乳化沥青水煮法试验方法和采用该方法检验复合乳化沥青粘附性时的评定标准。     

三维施工中SN388炮点表的设置

本文提供了SN388在三维施工中炮点表的几种设置方法，并进行了相应的对比说明，最后给出了改进炮点表设置的有关设想。     

Thermodynamic modeling of native point defects and dopants of GaN semiconductors

A thermodynamic modeling of GaN was carried out to describe the thermodynamic behavior of native defects, dopants, and carriers (free electrons and holes) in GaN semiconductors. The compound energy model (CEM) was used. An unintentionally doped GaN was taken as an example. Oxygen was introduced into the model as the unintentionally doped impurity, according to the practical experimental phenomena. The energies of component compounds in the model were defined based on the results of the ab initio calculations and adjusted to fit experimental data. The thermodynamic properties of the defects and the oxygen doped were calculated to show the facility of the model.     

Display reflectance: Basics,measurement, and rating

Abstract— In this paper, methods and instruments for measurement and evaluation of reflection characteristics are reviewed as needed for research and development of electronic displays and for material and surface modeling with ray‐tracing and rendering software packages. Contrast under ambient illumination and recognizability under daylight illumination are prime development targets in the electronic‐display field, while computation and synthesis of realistic scenes and objects are pushing the need for physical data in computer graphics applications. Three categories of instruments are available for detailed reflection analysis. They are based on (1) gonioscopic (mechanical) and conoscopic (optical) directional scanning, (2) imaging approaches, and (3) on arrangements with variable source or receiver aperture. The capabilities, advantages, and limitations of these methods are introduced and discussed in order to facilitate appropriate selection of methods and instruments. For illustration purposes we present typical results obtained from commercial electronic display screens. A basis for continued widespread implementation and standardization of reflection metrology as required for objective rating and comparison of electronic‐display screen performance under ambient illumination is provided.     

明渠水流泥沙运动水深平均及力矩方程的理论和验证

首次提出了水流泥沙运动水深平均及其力矩方程的概念 ,并从理论上推导出这套方程组。提出水流泥沙运动力矩方程的目的有两个 ,一是在不增加空间维数的情况下可以有效地恢复水流泥沙因子沿水深分布信息 ,克服目前普遍使用的水深平均方程过多地忽略沿水深分布信息的缺点 ;二是增强模型的模拟能力。针对这两个目的是否能真正得到体现 ,分别从理论和实验室资料两个方面对新推导的力矩方程进行了全面的检验。理论验证结果表明 ,一维的力矩方程除了能模拟水深平均的流速和含沙量 ,还能够较好地模拟水流泥沙因子沿水深分布信息 ,这充分说明了一维力矩方程的二维特性。为了检验力矩方程的模拟能力 ,特别选取了一些极端的水流泥沙运动实验 ,如清水冲刷、点源加沙和深槽回淤等。模拟结果表明 ,力矩方程对于这些极端的水沙运动具有较好的模拟能力     

战术弹道导弹落点预报的一种方法

根据椭圆弹道理论，提出了一种可以用于反战术弹道导弹作战的预测弹道及预报落点的方法，给出了算例，并分析了产生误差的原因和对预测结果的影响程度。     

核反应堆加热流道含汽量计算研究

指出了加热流道内含汽量传统算法中存在的问题 ,并提出了新的算法     

糯扎渡水电站机组主保护方案

结合糯扎渡水电站大型机组的发电机结构、发电机中性点引出方式及主接线对发电机主保护方案进行了分析研究，提出了发变组主保护方案，并初步确定了发电机中性点CT配置方案。同时也对主要的后备保护及异常运行保护进行了分析，并提出了设置方案。     

多测井曲线的综合处理合成

测井曲线是地质分层的基础，但在利用单一测井曲线解决复杂地质问题时也存在多解性和局限性。为克服多解性，人们采用多种测井曲线进行地质分层，提高了分层的精度。本文在此基础上提出把多条曲线分别赋予不同的加权因子，然后进行归一化处理，形成一条标准综合参数测井曲线。此综合参数曲线突出了所选的多条测井曲线的公共信息，减少或削弱了单一测井曲线中的偶然误差，提高了综合后测井资料的可信度。该方法可应用于地质分层、岩性分析、含油气预测等诸多领域。应用时要注意，并非所选择的测井曲线种类越多越好，而是要选择那些最能反映地层单元特征信息的测井曲线。     

A new stereological principle for test lines in three-dimensional space

A new principle is presented to generate isotropic uniform random (IUR) test lines hitting a geometric structure in three-dimensional space (3D). The principle therefore concerns the estimation of surface area, volume, membrane thickness, etc., of arbitrary structures with piecewise smooth boundary. The principle states that a point-sampled test line on an isotropic plane through a fixed point in 3D is effectively an invariant test line in 3D. Particular attention is devoted to the stereology of particles, where an alternative to the surfactor method is obtained to estimate surface area. An interesting case arises when the particle is convex. The methods are illustrated with synthetic examples.