Aromatic-imide-based TADF material as emitter for efficient yellow and white organic light-emitting diodes

An aromatic-imide based TADF emitter (AI-4Cz) was designed and synthesized. The TADF emitter showed high thermal stability, good electrochemical properties, obvious AIE activity, small ΔE_ST value of 0.02 eV, and intense yellow emissions with PLQY of 76%. AI-4Cz also exhibited obvious microsecond-scale delayed fluorescence lifetime. Yellow OLED based on AI-4Cz was further fabricated, which achieved EQE_max of 16.7%. Moreover, a white OLED was fabricated through the dual emission layer strategy by using AI-4Cz and DMAC-DPS as emitting dopants, and the device obtained CIE coordinates of (0.30, 0.40), CRI value of 66, and an EQE_max of 13.6%.     

Site occupation and energy transfer in full color emitting phosphor Ba2Ca(BO3)2:Ce3+(K+),Eu2+,Mn2+

White light-emitting diodes (WLEDs) fabricated by single-phase full color emitting phosphor are an emerging solution for health lighting. The crystallographic site occupation of activators in a proper host lattice is crucial for sophisticated design of such phosphor. Here, we report a high quality white light-emitting phosphor Ba₂Ca(BO₃)₂:Ce³⁺(K⁺),Eu²⁺,Mn²⁺ with spectral distribution covering whole visible region. Blue light emission originates from Ce³⁺ ions occupying preferentially Ba²⁺ site by controlling synthesis conditions. Green and red lights are obtained from Eu²⁺ occupying Ba²⁺ (and Ca²⁺) site and Mn²⁺ occupying Ca²⁺ site, respectively. In this triple-doped phosphor, strong red emission with a low concentration of Mn²⁺ is realized by the efficient energy transfer from Ce³⁺ and Eu²⁺ to Mn²⁺. Furthermore, high quality white light is accomplished by properly tuning the relative doping amount of Ce³⁺(K⁺)/Eu²⁺/Mn²⁺ based on efficient simultaneous energy transfer. The results indicate that Ba₂Ca(BO₃)₂:Ce³⁺(K⁺),Eu²⁺,Mn²⁺ is a promising white light-emitting phosphor in WLEDs application.     

The role played by dopant ions for the production of broadband white light emission from metal oxide nano-powders under laser diode excitation

We report on the role played by dopant ions to create broadband white light emission from metal oxide nano-powders. Y₂O₃ was doped with different rare earth ions (Nd³⁺, Er³⁺, Yb³⁺) and Cr³⁺ ion to investigate their role on the production of white light emission. We have determined that the dopant ions have a facilitator but not a decisive role on the production of the white light emission by doing measurements such as reflectance, white light emission, excitation power dependency and color quality parameters. All measurements showed that the production of white light does not depend on the amount and the type of the dopant ions.     

Going from green to white color electroluminescence through a nanoscale complex of Zinc (II)

In this paper, we report application of four novel Nano Zinc (II) complexes as the emitter dyes in organic light emitting diodes (OLEDs). The Nano Zinc (II) complexes emission, particularly its absorption, fluorescence spectra and quantum yield, tuned by varying sizes which affects environments of the Zinc (II) ion. OLED Devices with Nano Zinc (II) complexes were fabricated, giving rise to devices with peak emission ranging from 498 to 541 nm. Here, we have successfully employed sonoelectrochemical method for fabricating white OLEDs. The white emission ascribed to the exciton emission in Nano Zinc (II) complex emitter and from exciplex formation at the interface of PVK/Nano Zinc (II) complex. The experimental results demonstrate that this approach is ideal for color tuning of single and multilayer conducting semiconducting thin films used in the fabrication of organic electronic devices such as OLEDs.     

The kinetic and thermodynamic analysis of ultrasound-extraction of minerals from aerial parts of white lady's bedstraw (Galium mollugo L.)

The present paper deals with the extraction of some minerals (potassium, calcium and magnesium) from ground, dried aerial parts of white lady's bedstraw (Galium mollugo L.) using an aqueous ethanol solution (50% by volume) at different temperatures (from 23 to 40 °C) in the presence and absence of ultrasound. The main goal was to establish the kinetics and the thermodynamics of the two extraction processes. A phenomenological model involving simultaneous washing and diffusion was proved for both ultrasound-assisted and silent extraction of the minerals. The minerals extraction both in the presence and the absence of ultrasound is endothermic and irreversible since the enthalpy change and the entropy change are positive in the ranges of extraction temperature applied. The Gibbs free energy change for the extraction of minerals is negative, indicating that the process is feasible and spontaneous. The minerals yield increased by a factor of 1.02–1.06 and 1.14–1.27 in the absence and the presence of ultrasound, respectively for every 10 °C rise in temperature.     

Crystal structure,luminescent properties and white light emitting diode application of Ba3GdNa(PO4)3F:Eu2+ single-phase white light-emitting phosphor

A series of single-phase white-light-emitting phosphors, Eu²⁺-activated Ba₃GdNa(PO₄)₃F phosphors were synthesized by solid-state reactions. The crystal structure of Ba₃GdNa(PO₄)₃F was been identified by Rietveld refinement of X-ray diffraction pattern. The Eu²⁺-activated Ba₃GdNa(PO₄)₃F phosphors exhibit broad excitation spectra from 250 to 420 nm, which matched well with the n-UV LED chips. Under the excitation of 365 nm, the emission spectrum almost covered the entire visible region including two emission bands peaked at 472 nm and 640 nm. Three different Eu²⁺ emission centers in Ba₃GdNa(PO₄)₃F:Eu²⁺ phosphor were confirmed by their fluorescence decay lifetimes. The optimal concentration of Eu²⁺ in Ba₃GdNa(PO₄)₃F:xEu²⁺ was 3 mol% and the corresponding concentration quenching mechanism was verified to be exchange coupling interaction. Furthermore, the white light-emitting diode fabricated with Ba₃GdNa(PO₄)₃F:0.05Eu²⁺ phosphor and a 370 nm UV chip has a CIE of (0.3267, 0.2976) with a color-rendering index of 78.4 at the CCT of 5287 K.     

Realizing improved performance of down-conversion white organic light-emitting diodes by localized surface plasmon resonance effect of Ag nanoparticles

Down-conversion structure white organic light-emitting diodes (WOLEDs), in which white light is generated by a blue emission organic light-emitting diodes (OLEDs) in combination with a color conversion layer (CCL) outside the substrate, has attracted extensive interest due to its significant advantages in low cost and stabilized white-light emissions. However, low color-conversion efficiency of CCL is still a bottleneck for the performance improvement of down-conversion WOLEDs. Here, we demonstrate an approach to enhance the color-conversion efficiency of CCL-WOLEDs by localized surface plasmon resonance (LSPR) effect. In this approach, a blend of Ag nanoparticles and polyvinyl alcohol (PVA) is solution-deposited between the blue organic light emitting diodes and color-conversion layer. Based on the LSPR effect of this modified structure, the color conversion efficiency has improved 32%, from 45.4% to 60%, resulting a 14.4% enhancement of the current efficiency, from 9.73 cd/A to 11.14 cd/A. Our work provides a simple and low-cost way to enhance the performance of down-conversion WOLEDs, which highlights its potential in illumination applications.     

Synthesis of new green-emitting KBa1−xScSi3O9:Eu2+x phosphors for white LEDs

New green-emitting KBa_1−xScSi₃O₉:Eu²⁺_x phosphors for white LEDs were synthesized by a conventional solid-state reaction method. The obtained KBa_1−xScSi₃O₉:Eu²⁺_x phosphors show the strong broad optical absorption band from UV to blue light region and exhibit broad green emission with a peak at 521 nm under excitation at 405 nm due to the allowed 4f⁶5d¹−4f⁷ transition of Eu²⁺. Optimization of Eu²⁺ concentration resulted in the highest green emission peak intensity was obtained at the composition of KBa_0.94ScSi₃O₉:Eu²⁺_0.06, and the relative emission intensity of this phosphor was 32% of that of a commercial YAG:Ce³⁺ phosphor.     

Multifractal analysis application to the characterization of fatty infiltration in Iberian and White pork sirloins

This paper applies the multifractal analysis based on the sandbox method to describe the distribution of fatty infiltration in Iberian and White pork meat with the aim of characterization and classification. This work was carried out by making photographs of sirloin cuts of both breeds and then treated with image analysis software. The obtained image data were stored in text format and constituted the input for multifractal analysis. The results obtained show that pork sirloin connective fatty tissue exhibits a multifractal type of scaling. Significant correlations were found between some of the parameters governing the multifractal behavior and fat percentage, especially in the case of Iberian sirloin. The differences found for the relationships between the generalized fractal dimensions and fat percentage provide information for the categorization of the studied meat pieces.     

BaSi2O5荧光粉中Eu2+的制备，电子结构和荧光性质

绿色发射磷光剂BaSi2O5：Eu2+是由常见的固体反应合成。在CASTEP代码中,BaSi2O5可视为存在3.2eV直能隙的媒介带隙半导体。正如预期所料的,BaSi2O5光学带隙的计算值比对应的实验值低。200-400nm宽光谱范围可以有效地激活活化的Eu2 的BaSi2O5磷光剂,当最大半宽为95nm时,500nm处有一个发射峰。浓度和发射强度的研究表明Eu2 的最优浓度是0.05mol,当Eu2 容量超过临界值时,会出现浓度淬灭。最优条件的BaSi2O5的外量子效率：在315nm、350nm和365nm的激发下,Eu2 分别是96.1%、70.2%和62.1%。样品优越的光学性能表明绿色发射磷光剂可替代白光LED。