A ctivation measurement of neutron distribution in intermediate energy heavy ion target area

The distribution of neutrons produced by the reaction of 50MeV/u ^12C-ion on a thick Cu target are studied.The neutrons are measured with threshold activation detectors.Al.F,C,Al and In activation samples were used to measure neutrons with energy greater than 7,11,20,50MeV and thermal neutrons,respectively,The fluence rate,energy and angular distributions of neutrons,total neutron yield of 12C-ion and the emission rate in the forward direction of neutrons over 11 and 20MeV were obtained.     

RADIOACTIVE OR NATURAL TRACER。TECHNIQUES FOR LEAK DETERMINING OF DAM ABUTMENT

Infiltration and localization of preferential infiltration zones at the dam abutment are measured using radioactive tracer tests of flow in boreholes,meanwhile interconnection between boreholes and the energing water points is analysed.The theory and practice of radioactive tracer synthetic detective method are described to give methods and calculation formulae used under the condition of stable flow in single well to measure permeability coefficient and hydrostatic heads.Major single hole techniques including measurement for seepage line,velocity,rate of seepage flow and relationship of recharge of groundwater in aquifers are introduced briefly.The possibilities offered by natureal tracers are analysed,uincluding electric-conduct,pH-value and temperature of water as well as stable isotopes(D,^18O) and tritium.Furthermore,the sensibilities of this theory and methods were confirmed by detecting seepage flow field of Xinanjiang Dam.     

Investigation of fusion reactions in palladium and titanium tritide using galvanostatic,coulometric, and hydrogen permeation techniques

We describe several electrochemical methods used to investigate the possibility of cold fusion phenomena in palladium and titanium tritide cathodes. We performed long-term (up to 77 days) electrolysis experiments with electrochemical cells of the University of Utah type at current densities as high as 1 A/cm², while monitoring neutron and tritium levels. With some cells, we pulsed the current to determine if neutron bursts would result. In another cell, we used titanium tritide as the cathode to determine if D-T reactions yielding neutrons would occur. In no instance were levels of neutrons or tritium significantly above background except in the titanium tritide cell where isotopic exchange, occcurring between the electrode and the electrolyte, resulted in significant tritium levels. We also combined x-ray photoelectron spectroscopy (XPS) and electrochemical hydrogen permeation experiments to determine the effectiveness of various Pd surface treatment procedures on the resultant electrochemical hydrogen absorption efficiency. Electroanalytical and thermal desorption/gas analysis techniques indicated the maximum loading of H in Pd was to a ratio of HPd=0.8.     

An implicit enthalpy scheme for one-phase Stefan problems

A compact finite-difference scheme to solve one-phase Stefan problems in one dimension is described. Numerical experiments indicate that the moving interface is obtained withO(t) accuracy when 3–4 iterations per time step are used to solve the nonlinear implicit scheme. The scheme can be adapted to ADI methods in higher dimensions.     

Visual recognition efficiency of handheld infrared thermometer interface information under low ambient illuminance

One of the symptoms of plagues, epidemics or pandemics is often a fever, so during such unprecedented times, handheld infrared thermometers are vital devices for monitoring symptomatic individuals. It is therefore very important to enhance reading efficiency when these thermometers are used for lengthy periods of time in a low illuminance environment. The need for the efficient reading of infrared thermometers or a fast reaction time when reading the information is even more relevant now during the COVID-19 pandemic. In this study, a target search experiment of digital characters is carried out through a simulated interface and use scenarios of a handheld thermometer based on three variables: the inclination angle or slant of the seven segment display characters, screen brightness, and ambient illuminance. The experimental results show that the inclination angle or slant of the characters and ambient illuminance have a significant effect on the reaction speed. In general, the slowest reaction time is found when reading characters with a slant of 10° to the left and the reaction time is the fastest with a right slant of 20°. A continued reduction in ambient illuminance does not affect the visual recognition performance but instead further enhances reading efficiency. Increasing the screen brightness increases the reaction time more in relatively low ambient illuminance conditions as opposed to relatively high ambient illuminance, which implies that in higher ambient illuminance conditions, a brighter screen needs to be used to obtain the same reaction speed as that in lower ambient illuminance conditions.     

云计算安全需求分析研究

云计算是当下发展迅速的信息技术之一。由于其外包式的服务方式,云计算中的安全问题受到人们格外关注。只有妥善地保障云计算的安全,才不会掣肘云计算的发展和推广。鉴于云计算的复杂性和多面性,文章着眼云计算有别于传统技术的新特点、新趋势,首先提出了考量云计算安全需求的多维视角,随后围绕云计算具体实施过程中的若干关键技术,对云计算中的安全需求进行了细致全面的分析和阐释。     

Measurement of the heat of fusion of titanium and a titanium alloy (90Ti-6Al-4V) by a microsecond-resolution transient technique

A microsecond-resolution pulse heating technique was used for the measurement of the heat of fusion of titanium and a titanium alloy (90Ti-6Al-4V). The method is based on rapid (50- to 100-s) resistive self-heating of the specimen by a high-current pulse from a capacitor discharge system and measuring, as functions of time, current through the specimen, voltage across the specimen, and radiance of the specimen. Melting of the specimen is manifested by a plateau in the measured radiance. The time integral of the net power absorbed by the specimen during melting yields the heat of fusion. The values obtained for heat of fusion were 272 J · g^–1 (13.0 kJ · mol^–1) for titanium and 286 J · g^–1 for the alloy 90Ti-6Al-4V, with an estimated maximum uncertainty of ±6% in each value.Paper presented at the Second Workshop on Subsecond Thermophysics, September 20–21, 1990, Torino, Italy.     

Web服务器安全威胁与防范技巧

WEB服务器主要是面向互联网的,随着人们对互联网服务的需求不断扩大,各种互联网应用服务日益增多,Web服务器便成为众多信息化应用中最容易遭受攻击的对象。文章中主要介绍了几种常见的Web服务器安全威胁,并提出了相应的安全防范技巧。     

PSO-IIIA(3)亚砜萃取Pt(IV)的机理

研究表明,在酸性介质中,亚砜萃取Pt(Ⅳ)的主要机理为酸性缔合,其萃合物组成为H_2PtCl_6·6H_2O·2PSO。并计算了亚砜萃取Pt(Ⅳ)的萃取平衡常数。     

Reactivity study and kinetic evaluation of CuO-based oxygen carriers modified by three different ores in chemical looping with oxygen uncoupling (CLOU) process

In the chemical looping with oxygen uncoupling (CLOU) process,CuO is a promising material due to the high oxygen carrier capacity and exothermic reaction in fuel reactor but limited by the low melting point.The combustion rate of carbon is faster than the decoupling rate of oxygen carrier (OC).Hence,high tem-perature tolerance and rapid oxygen release rate of CuO modified by three different ores were investi-gated in this study.The kinetics analysis of oxygen decoupling with Cu-based oxygen carriers was also evaluated.Results showed that CuO modified by chrysolite had faster oxygen release rate than that of CuO.Limestone showed obvious positive effect on the oxidization process.The selected OCs could keep stable in at least 20 cycles,for about 1200 min.Shrinking core model (SCM) fitted well for the decoupling process in the temperature range of 1123-1223 K.Reduction rate kinetic information may aid in the development of chemical looping with oxygen uncoupling (CLOU) technologies during reactor design and process modeling.Ternary doped copper oxide with chrysolite and limestone could improve the reactivity of CuO in decoupling and coupling process and also improve the high temperature tolerance.