H4SiW12O40-PAn催化剂催化合成苯甲醛乙二醇缩醛

报道了以自制的H4SiW12 O40 (硅钨酸 ) -PAn (聚苯胺 )为催化剂 ,通过苯甲醛和乙二醇为原料合成了苯甲醛乙二醇缩醛。实验表明 :合成苯甲醛乙二醇缩醛适宜反应条件为 :n(苯甲醛 ) /n(乙二醇 ) =1 /2 .0 ,催化剂用量为反应物料总质量的 1 .0 % ,环己烷为带水剂 ,反应时间 1 .0h。上述条件下 ,苯甲醛乙二醇缩醛的收率可达 86.7% .     

乙二醇合成的研究进展

介绍了环氧乙烷、乙二醇技术的进展，总结了国内外合成乙二技术研究、开发的最新成果：合成气直接合成法、甲醛电化学加氢二聚法、甲醇醚氧化偶联法、多元醇加氢裂解法等。     

聚醚二醇钾盐引发D．L－丙交酯的开环聚合研究

以聚乙二醇－４０００钾盐为引发剂．合成了食不同长度聚醚链段的聚Ｄ．Ｌ－乳酸－聚乙二醇－聚Ｄ．Ｌ－乳酸（ＰＬＡ－ＰＥＧ－ＰＬＡ）三嵌段共聚物。考察了溶剂用量、引发剂用量、反应温度和时间、ＰＥＧ分子量、不同溶剂对聚合反应的影响。以１Ｈ－ＮＭＲ、ＩＲ、ＤＳＣ、ＧＰＣ对共聚物进行了表征。     

SO4^2——TiO2/β-沸石固体超强酸催化苯乙酮乙二醇缩酮的环境友好合成

采用直接浸清一焙烧法，制备了SO4^2--TiO2／β-沸石催化剂。并以其催化苯乙酮和乙二醇合成了苯乙酮乙二醇缩酮、考察了催化剂的焙烧温度、TiO2负载量、催化剂用量、原料配比、带水剂的种类和用量、田流时间对反应的影响。最佳的反应条件为：催化剂焙烧温度500℃、TiO2负载量10％（质量分数）、催化剂用量1．1g、n（苯乙酮）；n（乙二醇）=1：1．2、甲苯20mL、回流时间1．5h。在最佳反应条件下，苯乙酮乙二醇缩酮地度为99．6％，收率可达98．8％．SO4^2-TiO2／β-沸石催化剂制备简单、催化活性高、重复使用性好．     

柔软热收缩材料的研制

总结了经共混和辐射交联制备柔软耐老化的热收缩材料的研制过程。测得了不同乙丙橡胶含量和不同辐照剂量下的共混物的力学性能和凝胶含量，确定了共混物辐射交联的合适剂量。此外，还测试了ＥＰＤＭ和ＰＥ共混物经辐照后的耐油性能。在此基础上，制得了手感柔软的热收缩管材。     

我国煤制乙二醇竞争力分析

介绍了我国乙二醇市场现状,截至2019年底,我国乙二醇总产能为1 159万吨/年,其中,煤制乙二醇产能达491万吨/年,2020年还将有近400万吨/年的产能释放。煤制乙二醇技术逐渐成熟,所以短期内市场存在产能增速较快但产量增速缓慢的不匹配状态。比较了石油制乙二醇和煤制乙二醇生产工艺路线的成本,从生产成本、产品质量和物流方式3个维度分析了煤制乙二醇的市场竞争力,得出了煤制乙二醇的发展具有广阔前景,并根据国内乙二醇市场的远期发展趋势,提出了发展建议。     

HDPE/LLDPE reactor blends with bimodal microstructures—part I: mechanical properties

Reactor blends of polyethylene/poly(ethylene-co-1-octene) resins with bimodal molecular weight and bimodal short chain branching distributions were synthesized in a two-step polymerization process. The compositions of these blends range from low molecular weight (LMW) homopolymer to high molecular weight (HMW) copolymer and, vice versa, HMW homopolymer to LMW copolymer. The physical properties of the blends were found to be consistent with the nature of the individual components. For the tensile properties, the stiffness decreases with increasing the fraction of the copolymer, regardless of the molecular weight of the homopolymer fraction. For these blends with bimodal microstructures, it was confirmed that the degree of crystallinity governs the stiffness of the polymer. However, the energy dampening properties of the polymers benefit from the presence of the copolymer. A balance of stiffness and toughness can be obtained by altering the composition of the blends. For some blends, the presence of HMW homopolymer can dominate the tensile properties, showing little variation in the stiffness with increased addition of copolymer. It was also demonstrated that the testing conditions and thermal treatment of the polymer greatly influence the resulting elastic and energy dampening properties. Depending on the desired application, annealing these polymers (especially very low density copolymers) not only increases the crystallinity and stiffness, but also changes the frequency response of the dynamic mechanical properties.     

新显色剂4—（2—苯并噻唑偶氮）邻苯二酚—钼（Ⅵ）—OP体系的分光光度研究

在ｐＨ５．０～５．７范围内，新显色剂４－（２－苯并噻唑偶氮）邻苯二酚（ＢＴＡＰＣ）与钼（Ⅵ）和非离子表面活性剂ＯＰ反应，形成稳定的、带负电荷的、紫红色三元胶束配合物。该配合物中Ｍｏ（Ⅵ）与ＢＴＡＰＣ的组成比为１∶２；其λｍａｘ为５６０ｎｍ，对比度（Δλ）为１２８ｎｍ；在２０℃、ｐＨ５．２和μ０．１时，配合物的表观稳定常数为３．０２×１０１０，表观摩尔吸光系数ε５６０为８．１１×１０４Ｌ·ｍｏｌ－１·ｃｍ－１，真实ε５６０为７．６７×１０４Ｌ·ｍｏｌ－１·ｃｍ－１。钼含量在０～０．７２ｍｇ／Ｌ范围内遵从比耳定律。建议了配合物的结构。本法简便、快速、准确，用于合金钢试样中痕量或小量钼的测定，取得了满意的结果。     

Self-assembly and crystallization behavior of a double-crystalline polyethylene-block-poly(ethylene oxide) diblock copolymer

The self-assembly and crystallization behavior of a well-defined low molecular weight polyethylene-block-poly(ethylene oxide) (PE-b-PEO) diblock copolymer was studied. The number-average degrees of polymerization for the PE and PEO blocks were 29 and 20, respectively. The molecular weight distribution was 1.04 as determined by size-exclusion chromatography. The PE-b-PEO sample exhibited two melting points at 28.7 and 97.4 °C for the PEO and the PE crystals, respectively. The crystallization of the PE blocks was unconfined, while the crystallization of the PEO blocks was confined between pre-existing PE crystalline lamellae, as demonstrated by simultaneous small-angle X-ray scattering (SAXS) and wide-angle X-ray diffraction (WAXD) studies. In the fully crystalline state, both PE and PEO blocks formed extended-chain crystals with PE chains tilted ∼22° from the lamellar normal and PEO chains parallel to the lamellar normal, as evidenced by two-dimensional WAXD study of shear-oriented samples. Regardless of hydrogen bonding among hydroxyl chain ends in the PEO blocks, interdigitated, single-crystalline layer morphology was observed for both PE and PEO crystals. The partial crystalline morphology, where the PE crystallizes and the PEO is amorphous, had the same overall d-spacing as the fully crystalline morphology. A double-amorphous PEO layer sandwiched between neighboring PE crystalline layers was deduced based on a chain conformation study using Fourier transform infrared. The confined crystallization kinetics for PEO blocks was investigated by differential scanning calorimetry, which could be explained by a heterogeneous nucleation mechanism. The slower crystallization rate in the PEO-block than the same molecular weight homopolymer was attributed to the effects of nanoconfinement and PEO chains tethered to the PE crystals.     

丙二醇单甲醚丙酸酯合成体系的气相色谱分析

自行研制了氰乙基(25%,质量分数)甲基硅橡胶(XE-60)石英毛细管色谱柱。建立了对含游离酸的丙二醇单甲醚丙酸酯的色谱分析方法。该法具有分离效果好,分析速度快的优点。