O3/H2O2 Treatment of Methyl-terf-Butyl Ether in Contaminated Waters: Effect of Background COD on the O3-Dose

The destruction of methyl-tert-butyl ether (MTBE) in contaminated waters by O₃/H₂0₂ process was studied and the influence background COD, alkalinity, and hydrogen peroxide and MTBE concentrations on process treatment efficiency and ozone dosage was investigated. The treatment efficiency was evaluated by an Efficiency Index, which is based on electrical energy requirement for ozone production. It was found that the treatment efficiency decreases linearly with increasing concentrations of MTBE at constant background COD and with background COD at constant MTBE concentration. A simplified kinetic scheme was presented to account for these observations.     

Effects of Admixtures on the Anti—oxidation Property of MgO／Si3N4 Composite Refractory

The effect of the admixtures of Al and Si metals and B4C and MgAlON compounds on the oxideation of MgO/Si3N4 composite refractory has been studied,which is a promising carbon free refractory for steel-making applicatlon.The four kinds of admixtures can be used as anti-oxidants for Si3N4,ut the mixture of Al and Si achieved the best result .The mixture can not only play the role as antioxidant,but also assist the sintering process and help form dense sintering layer,improving the property of the composite.     

Maximization of total surface area of Pt-SnO<Subscript>2</Subscript>/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalyst by the Taguchi method

The maximization of the total surface area of Pt-SnO₂/Al₂O₃ catalyst was studied by using the Taguchi method of experimental design. The catalysts were prepared by sol-gel method. The effects of HNO₃, H₂O and aluminum nitrate concentrations and the stirring rate on the total surface area were studied at three levels of each. L₉ orthogonal array leading nine experiments was used in the experimental design. The parameter levels that give maximum total surface area were determined and experimentally verified. In the range of conditions studied it was found that, medium levels of HNO₃ and H₂O concentration and lower levels of aluminum nitrate concentration and stirring rate maximize the total surface area.     

Aerobic selective oxidation of (hetero)aromatic primary alcohols to aldehydes or carboxylic acids over carbon supported platinum

The synthesis of substituted benzaldehydes, benzoic acids, heterocyclic aromatic aldehydes and acids has been studied via the oxidation of the aromatic alcohols with air under mild pressure (<20 bar) at 100 °C, in the presence of a 1.95 wt.% Pt/C catalyst. The solvent was found to play the most important role in determining the selectivity of the oxidation products. Changing the solvent enabled tuning the reaction either to the aldehyde (pure dioxane), or the carboxylic acid (dioxane/aqueous solution without or with addition of sodium hydroxide). This oxidation method allowed to effectively oxidize many substituted benzylalcohols with various electron-releasing or -attracting groups (NO₂, Me, OMe, Cl, Br, OH, phenyl, …) and heterocyclic alcohols including nitrogen and sulphur atoms (2-thiophenemethanol, 2- and 4-pyridine methanol compounds).     

THE ROLE OF LATTICE OXYGEN IN THE DYNAMIC BEHAVIOR OF OXIDE CATALYSTS

The lattice of an oxide catalyst used for oxidation reactions can act as a reservoir for oxygen, storing and releasing it for reactions at the catalyst surface under appropriate conditions. The implication of this oxygen storage property of an oxide catalyst on its dynamic response characteristics has been investigated through an experimental study of 2-butene oxidation over vanadium oxide as a model reaction. Isothermal reaction rate measurements in a differential reactor and nonisothermal studies in a single pellet reactor have been carried out. Following a step increase in the feed butene concentration, isothermal reaction rate overshoot and pellet temperature overshoot were observed. These observations could be modelled in a qualitatively correct way by a very simple model accounting for the participation of lattice oxygen in the catalytic reactions under dynamic conditions. It is demonstrated through model simulations that the ignition characteristics of a catalyst pellet are significantly affected by the participation of the lattice oxygen, when steady state multiplicity is present.     

N-氧化烟酸的合成

以烟酸为原料，在冰醋酸溶液中，用双氧水氧化合成N-氧化烟酸。实验发现在合成中加入一种共沸剂，可以降低反应的回流温度，同时，也可将反应生成的水不断带走，使转化率增大，并且具有合成工艺简单，溶剂可以重复使用，无三废等特点。适宜的反应条件为：烟酸：双氧水：冰醋酸的摩尔比为1：1.5:3，共沸剂A或B的用量为30ml，反应时间为5h，收率92.0%。     

湿式空气氧化法处理乙烯废碱液装置的技术改造

针对中国石化齐鲁石化公司烯烃厂乙烯装置废碱液处理系统在试运转过程中存在的问题,通过分析原因,提出并实施改进工艺的相关措施,得到一组适宜的工艺操作参数,保证了废碱液湿式空气氧化装置的稳定运行。     

AgBiVMo oxide catalytic membrane for selective oxidation of propane to acrolein

A metal ions (Ag, Bi, V, Mo) modified sol–gel method was used to prepare a mesoporous Ag_0.01Bi_0.85V_0.54Mo_0.45O₄ catalytic membrane which was used in the selective oxidation of propane to acrolein. By optimizing the preparation parameters, a thin and perfect catalytically active membrane was successfully prepared. SEM results showed that the membrane thickness is 5 μm. XRD results revealed that Ag_0.01Bi_0.85V_0.54Mo_0.45O₄ with a Scheelite structure, which is catalytically active for the selective oxidation of propane to acrolein, was formed in the catalytic membrane only when AgBiVMoO concentrations were higher than 40%. Catalytic reaction results demonstrated that the selective oxidation of propane could be controlled to a certain degree, such as to acrolein, in the catalytic membrane reactor (CMR) compared to the fixed bed reactor (FBR). For example, a selectivity of 54.85% for acrolein in the liquid phase was obtained in the CMR, while only 8.31% was achieved in the FBR.     

Enthalpy recovery of gases issued from H2 production processes: Activity and stability of oxide and noble metal catalysts in oxidation reaction under highly severe conditions

Oxidation activity and stability under reaction was investigated for a series of mixed oxide catalysts, doped or not by a precious metal (Pd, Pt). The reaction feedstock, containing CO, H₂, CH₄, CO₂ and H₂O, simulated gases issued from H₂ production processes for fuel cells. Contrarily to conventional noble metal catalysts, mixed oxide samples present generally good stability under reaction at high temperature. The activities measured for the perovskite and hexaaluminate catalysts, are however largely lower than that of the reference Pd/Al₂O₃ catalyst. High activities were obtained after impregnation of 1.1 wt.% Pd or 0.8 wt.% Pt on the hexaaluminates samples. Even if Pd/Al₂O₃ was found to present a high activity, this sample suffered from drastic deactivation at 700 °C. Better stability were obtained on perovskite. Furthermore, doping hexaaluminate by Pt led to samples with good activities and high stability. Even if better activities were obtained by doping the hexaaluminate samples by Pd, the Pd/BaAl₁₂O₁₉ strongly deactivated, as it was previously observed for the reference catalyst. Interestingly, this Pd deactivation was not observed when Pd was impregnated on the Mn substituted hexaaluminate, leading to a stable and active catalyst. This suggests that it is possible to stabilize the palladium in its oxidized form at high temperature (700 °C) on the surface of some supports.     

Electrochemical studies of pyrite oxidation and reduction using freshly-fractured electrodes and rotating ring-disc electrodes

Oxidation and reduction processes on coal- and mineral-pyrite surfaces have been investigated to better understand the reactions that control the hydrophobicity and flotation behavior of pyrite. The incipient oxidation and reduction reactions were studied using fresh surfaces of pyrite that were created by in situ fracturing electrodes potentiostated at a predetermined potential. Chronoamperometry immediately after fracture and subsequent cyclic voltammetry have established that fresh fracture surfaces of pyrite instantaneously assume a unique potential (referred to as the “stable” potential) at which neither oxidation nor reduction takes place. For Peruvian and Chinese pyrites, the stable potential is −0.28 V (standard hydrogen electrode, SHE) at pH 9.2 and 0 V at pH 4.6. The initial oxidation of pyrite begins at potentials slightly positive of the stable potential and is believed to produce a hydrophobic sulfur-rich species, most likely a polysulfide or metal-deficient sulfide. A rotating ring-disc electrode (RRDE) was employed to study the kinetics and mechanisms of surface reactions on pyrite over moderate potential ranges. Two distinct soluble reduction products (ferrous hydroxide and HS⁻) and one distinct soluble oxidation product (ferrous hydroxide) were observed on pyrite in alkaline solutions. It is concluded that the initial oxidation of pyrite and the oxidation of ferrous to ferric hydroxide occur in a similar potential range. When the electrode is oxidized, e.g. by polishing, prior to experiments, the initial oxidation of pyrite is masked by the oxidation of ferrous hydroxide, making it difficult to study the oxidation of pyrite itself.