云南锰矿选矿现状与前景分析

云南锰矿资源丰富,具有品位高、低磷低铁、易选等特点。文章概述了斗南、鹤庆、建水等锰矿的选矿科研进展情况,三个锰矿均可采用强磁选或磁-重选流程选别,可提高品位8—12％;精矿含锰可达33—35％,锰回收率在80％以上的好结果。     

Influence of heat transfer on anodic oxidation of aluminium

The influence of convective heat transfer on constant current density anodizing of aluminium in sulfuric acid has been examined in a wall-jet electrode reactor. The uniformity of the anodic film thickness is related to the local electrode temperature distribution, which is dependent on the convection. The higher the local temperature, the greater the local oxide thickness. An increased local temperature enhances local field assisted oxide dissolution at the pore bases, and consequently acts to increase the local current density. At relatively high current densities, local features develop on the electrode surface, accompanied by high initial, local temperature rises. The relevance of such local features, limiting useful oxide growth, is considered further.     

Sol-gel processing: A versatile concept for special glasses and ceramics

The various parameters related to sol-gel processing are discussed with special reference to those which usually attract less attention but depending on the final product in mind, can play important roles. The versatility of the sol-gel technique in materials preparation is demonstrated by discussing the various products developed at the author’s laboratory by using this processing method.     

A detailed analysis of ambipolar diffusion in nanostructured metal oxide films

In this paper a transport equation is derived which describes the behaviour of the nanostructured metal oxide films in a photoelectrochemical cell. It is shown that a detailed analysis of the charge compensation mechanism necessarily leads to a transport equation with characteristics similar to but logically distinct from the pure diffusion equation. The studied phenomenon was named ambipolar diffusion in the early 1950s. It takes into account the fact that the diffusion processes of ions and electrons occur at different speeds. A weak electric field therefore couples the processes together to preserve charge neutrality. The electric field in turn affects the transport resulting in a deviation from purely diffusive behaviour. However, this has not been widely recognised in the literature for nanostructured semiconductor films until very recently. In this paper a detailed analysis is presented. It is based on the assumption that the current density is solenoidal. It is shown that application of the ambipolar diffusion model to a photoelectrochemical cell based on a nanostructured metal oxide film leads to an additional term in the transport equation, rather than only a new diffusion coefficient as in earlier work. It is also shown that the boundary conditions interact closely with the equation to form a transport model.     

Promising alloys for intermediate-temperature solid oxide fuel cell interconnect application

The formation of a low Cr-volatility and electrically conductive oxide outer layer atop an inner chromia layer via thermal oxidation is highly desirable for preventing chromium evaporation from solid oxide fuel cell (SOFC) metallic interconnects at the SOFC operation temperatures. In this paper, a number of ferritic Fe–22Cr alloys with different levels of Mn and Ti as well as a Ni-based alloy Haynes 242 were cyclically oxidized in air at 800 °C for twenty 100-h cycles. No oxide scale spallation was observed during thermal cycling for any of these alloys. A mixed Mn₂O₃/TiO₂ surface layer and/or a (Mn, Cr)₃O₄ spinel outer layer atop a Cr₂O₃ inner layer was formed for the Fe–22Cr series alloys, while an NiO outer layer with a Cr₂O₃ inner layer was developed for Haynes 242 after cyclic oxidation. For the Fe–22Cr series alloys, the effects of Mn and Ti contents as well as alloy purity on the oxidation resistance and scale area specific resistance were evaluated. The performance of the ferritic alloys was compared with that of Haynes 242. The mismatch in thermal expansion coefficient between the different layers in the oxide scale was identified as a potential concern for these otherwise promising alloys.     

环氧乙烷合成乙二醇的研究进展

介绍了环氧乙烷合成乙二醇的主要生产方法，包括以壳牌、联碳化学公司以及Halcon—SD公司为代表的环氧乙烷直接水合法，环氧乙烷催化水合法和碳酸乙烯酯法，后两种乙二醇生产方法是目前国内外研究开发的热点。催化剂体系是催化水合法工艺的关键，重点介绍了国内外各主要公司对催化剂体系的研究进展及使用效果；碳酸乙烯酯法分为乙二醇和碳酸二甲酯联产法以及碳酸乙烯酯水解法，详细介绍了国内外各主要公司对该技术的研究进展，包括工艺流程、催化剂体系等方面。将3种乙二醇生产方法进行技术经济比较，结果表明，催化水合法和碳酸乙烯酯法在原料消耗和能耗方面占优势。并对我国乙二醇生产工艺技术提出建议。     

Modelling of the extraction equilibrium of zinc from chloride solutions with tri-n-octylphosphine oxide

The extraction of zinc from chloride solutions with tri-n-octylphosphine oxide (TOPO) dissolved in benzene has been thermodynamically studied based on the law of mass action. A model employing the simplified Pitzer equations for stoichiometric activity coefficient estimations is found to be effective for the explanation and prediction of the distribution data, and the thermodynamic extraction constant is determined as log K_et = 5.16 ± 0.11 at 20°C.     

α-Fe_2O_3(SO_4~(2-),Sn)气敏电阻的温度响应特性

在气敏温度区域内研究了α-Fe_2O_3(SO_4~(2-),Sn)材料的电阻-温度特性,认为表面结构的变化导致温度特性出现峰值并呈现气敏性。可利用空气中电阻温度特性提供的信息改性或发现新的气敏材料。     

Flow of solutions of hydroxypropyl guar-poly(ethylene oxide) mixtures through a porous medium

Summary In flow through porous media, solutions of poly(ethylene oxide) (PEO) exhibit extension thickening, whereas hydroxypropyl guar (HPG) solutions are shear-thinning at high concentrations. The results show that the extension-thickening exhibited by PEO solutions becomes less critical with increasing flow rate as the concentration of HPG in the solution is increased. At high concentrations of HPG, the presence of PEO inhibits the shear-thinning behaviour, without increasing the apparent viscosity of the solution. The presence of HPG reduces the rate and extent of degradation of PEO in the flowing solution.