Enzymatic Analysis of Positional Distribution of Fatty Acids in Solid Fat by 1,3-Selective Transesterification with Candida antarctica Lipase B

A protocol for the analysis of the positional distribution of fatty acids (FA) in solid triacylglycerols (TAG) was developed using sn-1(3) selective alcoholysis catalyzed by immobilized Candida antarctica lipase B (CALB). One part by weight of solid fat and ten parts by weight of ethanol (99.5 %) were warmed to liquefy the fat. After adding 0.44 parts by weight of CALB, the mixture was shaken at 50 °C for 10 min then at 30 °C for 2.8 h. The recovery of 2-MAG after the 3-h transesterification reaction was ca. 85 % of the maximum theoretical yield (33 mol%), with the loss of 15 % attributable to the acyl migration from sn-2 to sn-1(3). The recovery was similar to that of the solvent-free alcoholysis of structured lipids, 1,3-dipalmitoyl, 2-oleoyl glycerol and 1,3-dioleoyl, 2-palmitoyl glycerol, conducted at 30 °C for 3 h. In contrast, the acyl migration from sn-1(3) to sn-2 was hardly observed. Because the detected acyl migration was only in the direction of sn-2 to sn-1(3), and not vice versa, it is proposed to determine the FA composition of the sn-2 position of TAG by the gas chromatographic analysis of 2-MAG fraction recovered from the enzymatic reaction mixture, and the FA composition of sn-1(3) position by a mass balance using the FA composition of TAG and of the sn-2 position as inputs. The procedure was successfully applied to palm oil and shea butter, and docosahexaenoic acid (DHA)-rich single cell oil from Aurantiochytrium sp. KH105 for the first time.     

Simultaneous biohydrogen (H2) and bioplastic (poly-β-hydroxybutyrate-PHB) productions under dark,photo, and subsequent dark and photo fermentation utilizing various wastes

The present study is focused on bio hydrogen (H₂) and bioplastic (i.e., poly-β-hydroxybutyrate; PHB) productions utilizing various wastes under dark fermentation, photo fermentation and subsequent dark-photo fermentation. Potential bio H₂ and PHB producing microbes were enriched and isolated. The effects of substrate (rice husk hydrolysate, rice straw hydrolysate, dairy industry wastewater, and rice mill wastewater) concentration (10–100%) and pH (5.5–8.0) were examined in the batch mode under the dark and photo fermentation conditions. Using 100% rice straw hydrolysate at pH 7, the maximum bio H₂ (1.53 ± 0.04 mol H₂/mol glucose) and PHB (9.8 ± 0.14 g/L) were produced under dark fermentation condition by Bacillus cereus. In the subsequent dark-photo fermentation, the highest amounts of bio H₂ and PHB were recorded utilizing 100% rice straw hydrolysate (1.82 ± 0.01 mol H₂/mol glucose and 19.15 ± 0.25 g/L PHB) at a pH of 7.0 using Bacillus cereus (KR809374) and Rhodopseudomonas rutila. The subsequent dark-photo fermentative bio H₂ and PHB productions obtained using renewable biomass (i.e., rice husk hydrolysate and rice straw hydrolysate) can be considered with respect to the sustainable management of global energy sources and environmental issues.     

COMPUTER-AIDED ANALYSIS AND DESIGN OF AN ATP REGENERATION REACTOR

The two coupled reactions catalyzed by the enzymes adenylate kinase and acetate kinase for the regeneration of ATP from AMP in a CSTR were analyzed to obtain information required for the design of such a reactor. Unconventional but efficient computational methods were developed to handle the difficulty associated with the extremely complex rate expressions involved.     

Integration of Ultrafiltration Unit Operations in Biotechnology Process Design

A stepwise process design approach is proposed to model membrane unit operations generally in combination with experimental model parameter determination in laboratory scale, in order to predict the purification performance a priori by simulations for multicomponent mixtures. The development of a rigorous model for an ultrafiltration membrane is described. In conceptual process design, the degree of comprehension of all unit operations integrated have to be almost identical to be able of any consistent process proposal taking equipment‐related fluid‐dynamical and kinetic nonidealities besides thermodynamical feasibility into account. Therefore, a process model, combining the most limiting factors within one mathematical model, is established and various filtrations are carried out with a binary solution for validation. Additionally, a standard laboratory equipment is instituted for logging time‐dependent concentration profiles. The practicability of the proposed procedure is proven in order to design and integrate ultrafiltration membranes into total purification processes.     

应用型本科高校生物技术专业课程设置改革的思考

地方应用型本科生物技术专业课程设置的重点应该着重于发挥基础特长和应用型实践。目标定位于合乎自身特点,具有鲜明特色性的品牌专业。     

Rapid Quantification of Low-Viscosity Acetyl-Triacylglycerols Using Electrospray Ionization Mass Spectrometry

Acetyl‐triacylglycerols (acetyl‐TAG) possess an sn‐3 acetate group, which confers useful chemical and physical properties to these unusual triacylglycerols (TAG). Current methods for quantification of acetyl‐TAG are time consuming and do not provide any information on the molecular species profile. Electrospray ionization mass spectrometry (ESI–MS)‐based methods can overcome these drawbacks. However, the ESI–MS signal intensity for TAG depends on the aliphatic chain length and unsaturation index of the molecule. Therefore response factors for different molecular species need to be determined before any quantification. The effects of the chain length and the number of double‐bonds of the sn‐1/2 acyl groups on the signal intensity for the neutral loss of short chain length sn‐3 groups were quantified using a series of synthesized sn‐3 specific structured TAG. The signal intensity for the neutral loss of the sn‐3 acyl group was found to negatively correlated with the aliphatic chain length and unsaturation index of the sn‐1/2 acyl groups. The signal intensity of the neutral loss of the sn‐3 acyl group was also negatively correlated with the size of that chain. Further, the position of the group undergoing neutral loss was also important, with the signal from an sn‐2 acyl group much lower than that from one located at sn‐3. Response factors obtained from these analyses were used to develop a method for the absolute quantification of acetyl‐TAG. The increased sensitivity of this ESI–MS‐based approach allowed successful quantification of acetyl‐TAG in various biological settings, including the products of in vitro enzyme activity assays.     

现代生物技术在食品包装中的应用现状及发展前景

对现代生物技术在食品包装中的应用作了论述,重点对生物酶工程、基因工程和生物信息技术在食品包装中的应用作了实例分析,同时对现代生物技术在食品包装中的应用前景进行展望。     

A proteomic analysis of green and white sturgeon larvae exposed to heat stress and selenium

Temperature and selenium are two environmental parameters that potentially affect reproduction and stock recruitment of sturgeon in the San Francisco Bay/Delta Estuary. To identify proteins whose expression is modified by these environmental stressors, we performed a proteomic analysis on larval green and white sturgeons exposed to 18 or 26 °C and micro-injected with Seleno-L-Methionine to reach 8 µg g⁻¹ selenium body burden, with L-Methionine as a control. Selenium and high temperature induced mortalities and abnormal morphologies in both species, with a higher mortality in green sturgeon. Larval proteins were separated by two-dimensional gel electrophoresis and differential abundances were detected following spot quantitation and hierarchical cluster analysis. In green sturgeon, 34 of 551 protein spots detected on gels showed a variation in abundance whereas in white sturgeon only 9 of 580 protein spots were differentially expressed (P < 0.01). Gel replicates were first grouped according to heat treatment. Fifteen of these spots were identified using MALDI TOF/TOF mass spectrometry. Proteins involved in protein folding, protein synthesis, protein degradation, ATP supply and structural proteins changed in abundance in response to heat and/or selenium. 40S ribosomal protein SA, FK506-binding protein 10, 65 kDa regulatory subunit A of protein phosphatase 2, protein disulfide isomerase, stress-induced-phosphoprotein 1, suppression of tumorigenicity 13 and collagen type II alpha 1, were differentially expressed in high temperature treatment only. Serine/arginine repetitive matrix protein 1, creatine kinase, serine peptidase inhibitor Kazal type 5 and HSP90 were sensitive to combined temperature and selenium exposure. Valosin-containing protein, a protein involved in aggresome formation and in protein quality control decreased more than 50% in response to selenium treatment. Potential use of such proteins as biomarkers of environmental stressors in larval sturgeons could indicate early warning signals preceding population decline.     

Considerations for infectious disease research and practice

As the 21st century unfolds, strategies to prevent and control infectious diseases remain an area of vital interest and concern. The burden of disease, disability, and death caused by infectious diseases is felt around the world in both developed and developing nations. Moreover, the ability of infectious agents to destabilize populations, economies, and governments is strikingly apparent. To an unprecedented degree, infectious disease-related issues are high on the agendas of world leaders, philanthropists, policymakers, and the public. This enhanced focus, combined with recent scientific and technological advances, creates new opportunities and challenges for infectious disease research and practice. This paper examines these issues in the context of three countries: China, India, and the United States.     

生物技术在香精香料生产中的应用

利用生物技术生产天然香料正在迅速扩大。在市场上 ,天然香料如香兰素、苯甲醛和癸内酯每年都有几千吨的产品。它们可以通过微生物、植物细胞或游离酶进行生物转化和从头合成而生产出来的 ,本文深入讨论生物技术在香精香料工业的应用前景