Sample-induced internal pH gradients in microcolumn liquid chromatography of proteins

Summary The technique of an internal pH gradient induced by the sample is applied to the separation of proteins by liquid chromatography. Compatibility of the method with microcolumns is demonstrated and examples of separations on different types of sorbents are given.     

Amelioration of methane yield in cheese whey fermentation by controlling the pH of the methanogenic stage

A two-stage, no-mix anaerobic digester of 145 L capacity was used to investigate the effect of controlling the pH of the methanogenic stage on the biogas production and the pollution potential reduction of acid cheese whey. The digester was operated at a 15-d hydraulic retention time, and a temperature of 35°C. Controlling the pH of the methanogenic stage increased the biogas production rate and methane yield by 77.77 and 289.00%, respectively. Reductions of up to 32.19, 44.44, and 35.86% in the COD, solids and nitrogen were achieved.     

Sol-gel approach to in situ creation of high pH-resistant surface-bonded organic-inorganic hybrid zirconia coating for capillary microextraction (in-tube SPME)

A novel zirconia-based hybrid organic-inorganic sol-gel coating was developed for capillary microextraction (CME) (in-tube SPME). High degree of chemical inertness inherent in zirconia makes it very difficult to covalently bind a suitable organic ligand to its surface. In the present work, this problem was addressed from a sol-gel chemistry point of view. Principles of sol-gel chemistry were employed to chemically bind a hydroxy-terminated silicone polymer (polydimethyldiphenylsiloxane, PDMDPS) to a sol-gel zirconia network in the course of its evolution from a highly reactive alkoxide precursor undergoing controlled hydrolytic polycondensation reactions. A fused silica capillary was filled with a properly designed sol solution to allow for the sol-gel reactions to take place within the capillary for a predetermined period of time (typically 15-30 min). In the course of this process, a layer of the evolving hybrid organic-inorganic sol-gel polymer got chemically anchored to the silanol groups on the capillary inner walls via condensation reaction. At the end of this in-capillary residence time, the unbonded part of the sol solution was expelled from the capillary under helium pressure, leaving behind a chemically bonded sol-gel zirconia-PDMDPS coating on the inner walls. Polycyclic aromatic hydrocarbons, ketones, and aldehydes were efficiently extracted and preconcentrated from dilute aqueous samples using sol-gel zirconia-PDMDPS coated capillaries followed by thermal desorption and GC analysis of the extracted solutes. The newly developed sol-gel hybrid zirconia coatings demonstrated excellent pH stability, and retained the extraction characteristics intact even after continuous rinsing with a 0.1 M NaOH solution for 24 h. To our knowledge, this is the first report on the use of a sol-gel zirconia-based hybrid organic-inorganic coating as an extraction medium in solid phase microextraction (SPME).     

Performance characteristics of suspended particulate reagent-iminodiacetate as a binding agent for diffusive gradients in thin films

The performance characteristics of an alternative binding agent, suspended particulate reagent-iminodiacetate (SPR-IDA), for use with DGT methodology were investigated. The parameters investigated during this study included gel hydration, blank levels, elution factor (f_e), capacity, the effects of pH on the binding of trace metals by DGT. The novel application of this resin for use as a quantitative standard for laser ablation ICP-MS was also evaluated. To further constrain the results for the SPR-IDA binding agent, parallel experiments were performed using resin gel containing Chelex 100, which has been widely reported in the literature. Hydration results showed that the SPR-IDA resin gel reached a stable dimension and weight within ∼30 min and was dimensionally stable for ≤6 months. The measured DGT blanks for the SPR-IDA resin were 0.0023, 0.15, 0.21, 0.0033 and 0.011 ng disc⁻¹ for Co, Ni, Cu, Cd and Pb, respectively. The elution factor differed for the two resin types with the Chelex 100 recoveries slightly lower than previous reports and the SPR-IDA resin showing on average ∼5-9% better recoveries than DGT containing Chelex 100. The measured capacity of DGT discs containing the SPR-IDA binding agent was 0.26 mg Cd, similar to the calculated value of 0.29 mg Cd, indicating the entire resin layer was available for metal uptake.Both resin types performed equally well when deployed in 1 mM NaNO₃ solutions with DGT measurements of ∼100% of direct solution measurements for Co, Ni and Cd. However, DGT measurements of Cu and Pb systematically decreased with increasing solution pH down to ∼50% of solution values at pH 8.0, due to artifacts resulting from colloid formation during the addition of the metals. This was remedied by adding the metals as dilute salt standards and addition of Mg(NO₃)₂ to eliminate adsorption to the container walls. In the latter experiments, DGT measured concentrations of Co, Ni, Cu, Cd and Pb were in agreement with solution concentrations. Deployment of DGT in solutions with increasing concentrations of trace metals yielded linear results, suggesting that quantitative analysis using simplified laser ablation techniques should be possible using this newly characterized SPR-IDA resin gel.     

Efficient synthesis of magnetic nanoparticle-Musa acuminata peel composite for the adsorption of anionic dye

The impregnation of magnetite (Mt) nanoparticle (NPs) onto Musa acuminata peel (MApe), to form a novel magnetic combo (MApe-Mt) for the adsorption of anionic bromophenol blue (BPB) was studied. The SEM, EDX, BET, XRD, FTIR and TGA were used to characterize the adsorbents. The FTIR showed that the OH and CO groups were the major sites for BPB uptake onto the adsorbent materials. The average Mt crystalline size on MApe-Mt was 21.13 nm. SEM analysis revealed that Mt NPs were agglomerated on the surface of the MApe biosorbent, with an average Mt diameter of 25.97 nm. After Mt impregnation, a decrease in BET surface area (14.89 to 3.80 m²/g) and an increase in pore diameter (2.25–3.11 nm), pore volume (0.0052–0.01418 cm³/g) and pH point of zero charge (6.4–7.2) was obtained. The presence of Pb(II) ions in solution significantly decreased the uptake of BPB onto both MApe (66.1–43.8%) and MApe-Mt (80.3–59.1%), compared to other competing ions (Zn(II), Cd(II), Ni(II)) in the solution. Isotherm modeling showed that the Freundlich model best fitted the adsorption data (R² > 0.994 and SSE < 0.0013). In addition, maximum monolayer uptake was enhanced from 6.04 to 8.12 mg/g after Mt impregnation. Kinetics were well described by the pseudo-first order and liquid film diffusion models. Thermodynamics revealed a physical, endothermic adsorption of BPB onto the adsorbents, with ΔH^o values of 15.87–16.49 kJ/mol, corroborated by high desorption (over 90%) of BPB from the loaded materials. The viability of the prepared adsorbents was also revealed in its reusability for BPB uptake.     

Effect of pH on the Encapsulation of the Salicylic Acid / Salicylate System by Hydroxypropyl-β-Cyclodextrin at 25 °c. A Fluorescence Enhancement Study in Aqueous Solutions

The encapsulation of the acid/base conjugated system salicylic acid(HSA)/salicylate (SA^-) by hydroxypropyl--cyclodextrin (HPBCD) has beenstudied through fluorescence emission enhancement measurements in aqueoussolutions at 25 °C. With the aim of analyzing the crucial importance ofa proper and cautious choice of the pH of the medium (i.e. choice of thebuffer), the study has been carried out at pH = 1, 2, 4 and 7. Since the pK_a of the HSA/SA^- system is 2.95 at 25 °C, the presence of the protonated(HSA) and non-protonated (SA^-) forms suitable for inclusion by cyclodextrinvary appreciably within the different pH conditions: 99% HSA,1% SA^- at pH = 1, 90% HSA, 10% SA^- at pH = 2,10% HSA, 90% SA^- at pH = 4, and 0% HSA,100% SA- at pH =7. The association constants K CD : HSA and K _{CD: SA-} have been determined in all cases by using a nonlinear regressionanalysis of the experimental data at three different ^em. The effectof the pH of the medium on all the equilibria involved as well as in the Kvalues is fully discussed. The 8-anilino-1-naphthalene sulfonate (ANS) +-cyclodextrin (-CD) system, widely reported in literature, hasinitially been studied to check the experimental protocol and the numericalmethod.     

The influence of pH on phosphatidylcholine monolayer at the air/aqueous solution interface

The measurements of the interfacial tension at the air/aqueous subphase interface as the function of pH were performed. The interfacial tension of the air–aqueous subphase interface was divided into contributions of individuals. A simple model of the influence of pH on the phosphatidylcholine monolayer at the air/hydrophobic chains of phosphatidylcholine is presented. The contributions of additive phosphatidylcholine forms (both interfacial tension values and molecular area values) depend on pH. The interfacial tension values and the molecular areas values for LH⁺, LOH⁻ forms of phosphatidylcholine were calculated. The assumed model was verified experimentally.     

Multi‐stimuli‐responsive self‐immolative polymer assemblies

Self‐immolative polymers (SIPs) undergo depolymerization in response to the cleavage of stimuli‐responsive end‐caps from their termini. Some classes of SIPs, including polycarbamates, have depolymerization rates that depend on environmental factors such as solvent and pH. In previous work, hydrophobic SIPs have been incorporated into amphiphilic block copolymers and used to prepare nanoassemblies. However, stimuli‐responsive hydrophilic blocks have not previously been incorporated. In this work, we synthesized amphiphilic copolymers composed of a hydrophobic polycarbamate SIP block and a hydrophilic poly(2‐(dimethylamino)ethyl methacrylate) (PDMAEMA) block connected by a UV light‐responsive linker end‐cap. It was hypothesized that after assembly of the block copolymers into nanoparticles, chain collapse of the PDMAEMA above its lower critical solution temperature (LCST) might change the environment of the SIP block, thereby altering its depolymerization rate. Self‐assembly of the block copolymers was performed, and the depolymerization of the resulting assemblies was studied by fluorescence spectroscopy, dynamic light scattering, and NMR spectroscopy. At 20 °C, the system exhibited a selective response to the UV light. At 65 °C, above the LCST of PDMAEMA, the systems underwent more rapid depolymerization, suggesting that the increase in rate arising from the higher temperature dominated over environmental effects arising from chain collapse. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1868–1877     

Structural diversity in poly(disulfide)s

This article reports a synthetic methodology for single step preparation of telechelic poly(disulfide)s (PDS) by step‐growth polymerization between a di‐thiol and a commercially available monomer 2,2′‐dithiodipyridine in presence of a functional group appended pyridyl disulfide moiety as the “mono‐functional impurity” (MFI). Redox‐destructible well‐defined segmented PDSs with functional chain terminal, predicted and tunable degree of polymerization and narrow polydispersity index (<2.0) could be synthesized under a mild reaction condition. Using an appropriate MFI, PDS could be synthesized with trithiocarbonate chain terminals in a single step, which could be further used as macro chain‐transfer agent (CTA) for chain growth polymerization under RAFT mechanism producing ABA type tri‐block copolymer wherein the B block consists of the degradable PDS chain. By copolymerization between a hydrophobic di‐thiol monomer and a hydroxyl group appended di‐thiol monomer, PDS could be prepared with pendant hydroxyl functional group which was utilized to initiate ring opening polymerization of cyclic lactide monomers producing well‐defined degradable graft‐copolymer. The pendant hydroxyl groups were further utilized to anchor a polar carboxylic group to the degradable PDS backbone which under basic condition showed aqueous self‐assembly generating micelle‐like structure with hydrophobic guest encapsulation ability and glutathione responsive sustained release. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 194–202