Direct determination of gentamicin components by capillary electrophoresis with potential gradient detection

A simple and fast method was developed to determine non-UV active compounds directly without derivatization. The usefulness of the method was demonstrated by detecting the major components in aminoglycoside antibiotic mixtures using capillary zone electrophoresis with potential gradient detection. Under optimized separation conditions (0.2 mM cetyltrimethylammonium bromide (CTAB), 1 mM ammonium citrate, pH 3.5), gentamicin was separated into three major peaks (C1, C1a, and C2+C2a) within 15 min. This method showed better sensitivity than other capillary electrophoresis (CE) methods for determining underivatized gentamicin. The linear range was from 10 to 500 ppm. Because of its good repeatability and simplicity, this new method could be a good alternative for the current assays given by US Pharmacopoeia and European Pharmacopoeia.     

High-performance liquid chromatographic determination of Levetiracetam in human plasma: comparison of different sample clean-up procedures

An accurate and precise high-performance liquid chromatographic method using diode array detection for the determination of the novel antiepileptic, Levetiracetam, has been developed. Three clean-up procedures for the analysis of Levetiracetam in human plasma were implemented and evaluated, namely solid-phase extraction, deproteinization by addition of organic solvents and formation of insoluble salts. Adenosine was used as the internal standard for all three sample pretreatment procedures. Among the several cartridges used for solid-phase extraction, the hydrophilic-lypophilic balance (Oasis) HLB) phase provides the best extraction yield of Levetiracetam, together with high precision. With the two other clean-up procedures involving plasma deproteinization by addition of methanol or zinc sulphate, lower sensitivity and precision of the assays were obtained. However, they are cheaper and faster when compared with the solid-phase extraction procedure.     

安培检测芯片毛细管电泳及其初步应用

An end-channel amperometric detector with a guide tube for working electrode was designed and integrated on a home-made glass microchip. The guide tube was directly patterned and fabricated at the end of the detection reservoir, which made the fixation and alignment of working electrode relatively easy. The fabrication was carried out in a two-step etching process. A 30 μm carbon fiber microdisk electrode and Pt cathode were also integrated onto the amperometric detector. The baseline separation of dopamine (DA), catechol (CA) and epinephrine (EP) was achieved within 80 s. Relative standard deviations of not more than 5.2% were obtained for both peak currents and migration times of DA and CA (n=5). Using standard adding method, DA in tLrine and plasma samples was detected. The recoveries were in the range of 83%—103%.     

The potential of serially coupled alkyl-bonded silica monolithic columns for high resolution separations of pharmaceutical compounds in biological fluids

Summary In this paper we investigate the potential of alkyl-bonded silica monolithic columns for the isolation and identification of drug-related components in biological fluids. Up to 6 columns have been connected in series to produce a chromatographic system with up to 40,000 plates. This high-resolution chromatography system has been coupled to both MS and NMR to enable efficient detection and characterisation of drug-related components in biological fluids. The use of six coupled columns has been shown to give enhanced resolution over a high quality silica particulate column packed with 3 μm material which exhibits the same back pressure. The effect of volume and mass load on the performance of monolithic columns for semi-preparative chromatography of biological fluids has also been investigated. In these studies it was possible to inject up to 100 mL of neat urine with no loss of chromatographic performance. Furthermore, upon re-testing, the columns showed similar chromatographic performance. Again several columns were serially connected, producing enhanced resolution in the semi-preparative mode.     

Trace determination of nitrated polycyclic aromatic hydrocarbons using liquid chromatography with on-line electrochemical reduction and fluorescence detection

An efficient clean-up procedure coupled with a high performance liquid chromatography (HPLC) with on-line electrochemical (EC) reduction and fluorescence detection (FLD) was developed to quantify nitrated polycyclic aromatic hydrocarbons (NPAHs) in the airborne particulate. In this process, NPAHs were extracted ultrasonically followed by analysis by using a reversed phase column with an aqueous eluent containing 70% aqueous acetonitrile and sodium monocholoroacetate as a buffer solution. The extraction efficiencies were above 83% for 1-nitropyrene and 1,3-dinitropyrene (1,3-DNP) 1,6-DNP, and 1,8-DNP, and calibration graphs were linear with very good correlation coefficients (r>0.999) and the detection limits were in the range of 1.0-2.2 pg for dinitropyrenes and nitropyrene. The proposed method provides a relatively simple and convenient procedure for determining the NPAHs samples in airborne particulate.     

HPLC quantification of flavonoids and biflavonoids inCupressaceae leaves

Summary The aim of this investigation was to obtain qualitative and quantitative profiles of the flavonoid and biflavonoid composition of six cypress species—Cupressus funebris L.,Cupressus sempervirens L.,Cupressus glabra L.,Cupressus arizonica L.,Cupressus goveniana L., andCupressus lusitanica L. HPLC-diode-array detection (DAD), HPLC-MS, and HPTLC were used to identify the individual compounds. A chromatographic method was optimized for identification and quantification of the main flavonoid glycosides and biflavonoids. The flavonoids identified and calibrated were: rutin, quercetin glucoside, quercetin rhamnoside, and kaempferol 3-O-rhamnoside. The biflavonoids identified and calibrated were: cupressuflavone, amentoflavone, robustaflavone, hinokiflavone, methylrobustaflavone, methylamentoflavone, and dimethylcupressuflavone.     

An improved enzymatic assay for glucose determination in blood serum using a l,1′-dimethylferricinium dye

l,l′-dimethylferricinium (DMFe⁺),a stable and pH-insensitive blue dye, was prepared via enzymatic oxidation of a 1,1′-dimethylferrocene (DMFe):2-hydroxypropyl-β-cyclodextrin (HPCD) watersoluble inclusion complex, using bilirubin oxidase immobilized onto porous aminopropyl glass beads via glutaraldehyde activation. In the presence of glucose, DMFe⁺ was reduced to DMFe by reacting with the reduced glucose oxidase (FADH₂), and the absorbance decrease was followed at 650 nm. In acetate pH 5.2 buffer, the response to glucose in blood serum was nonlinear, especially in the low concentration range, because of a competition for the reduced glucose oxidase between the DMFe⁺ dye and oxygen. At this pH, endogenous ceruloplasmin was also observed to oxidize residual DMFe (16%) in the dye preparation, causing an increase in absorbance at 650 nm. An assay protocol was then developed using maleate buffer, pH 6.5, to overcome these interferences as well as mutarotation of α-D-glucose. The results obtained for glucose in the blood serum samples agreed well with those of the reference hexokinase/glucose-6-phosphate dehydrogenase method.     

高效毛细管电泳电导法快速检测复方维生素B片中的VB1、VB12、VB6和VC

采用高效毛细管电泳电导法同时分离、测定了复方维生素B片中的主要成分VB1, VB12,VB6和VC的含量.研究了运行缓冲溶液的酸度和浓度、电泳电压、进样时间等因素对电泳的影响.在优化的实验条件下40 mmol/L Tris -4 mmol/L H3BO3 (pH 8.0) 的缓冲溶液中加入0.30 mmol/L CTAB(溴化十六烷基三甲基铵),分离电压为15 kV,上述4组分在5 min内得到良好的分离.维生素B1,B12,B6和VC的线性范围分别为5.5～1.0 mg/mL; 15～1.5 mg/mL; 1.0～0.40 mg/mL和6.6～0.80 mg/mL; 检测限分别为0.80 μg/mL, 4.0 μg/mL, 0.50 μg/mL, 2.9 μg/mL; 5次测定峰高的相对标准偏差分别为2.2%, 1.6%, 3.9%, 2.8%.5次测定的平均回收率分别为99%, 94%, 100%, 97%.     

Immunoassay of P-glycoprotein on single cell by capillary electrophoresis with laser induced fluorescence detection

The cellular mechanism based on P-glycoprotein (PGP) for its drug pump function has become very important in multidrug resistance (MDR) research. A method has been established to characterize PGP on single K562 cell by coupling capillary electrophoresis with laser induced fluorescence detection. A permeable intact cell after the immunoassay binding with fluorescence labeling antibody was injected into the capillary and directly separated without lysis. It was found that once 5-10 optional cells were detected in batch, the PGP amount on this cell line could be outlined and calculated clearly. The PGP amount on K562 MDR cell line is 3.88 times higher than that on K562 sensitive cell line. These two cell lines with immunoassay binding were also analyzed by injection of multi-cells in order to improve the throughput. A resistance factor so called multidrug resistance multiple (MRM) was introduced to evaluate the MDR difference between cell lines. The MRM values of the cell line K562 measured by single cell analysis are well correlated with those by flow cytometry, which also prove the validity of our method in single cell analysis for the possibility of cancer diagnosis, pharmacokinetics and drug screening in future.     

Supercritical fluid chromatography of petroleum products using flameless sulfur chemiluminescence detection

Supercritical fluid chromatography using flameless sulfur chemiluminescence detection has been investigated for the analysis of sulfur compounds in petroleum products. The chromatography and detection system was easy to implement and exhibited good precision, linearity, selectivity, and sensitivity. A minimum detectable limit of 0.3 pg sulfur/s was obtained, and response to sulfur in different sulfur species was nearly equimolar.