表面活性剂增敏光度法测定锌

在弱酸性(pH=4.5)介质中,非离子表面活性剂Tween-80存在下,7-(苯并噻唑-2-偶氮)-8-羟基喹啉-5-磺酸(BTAQS)与锌形成2:1的紫色配合物,最大吸收波长位于580nm处,表观摩尔吸光系数为7.4×104L·mol-1·cm-1,锌含量在0-6μg/25mL范围内符合比耳定律。测定矿样中的锌,结果满意。     

Statics and dynamics of adhesion between two soap bubbles

An original set-up is used to study the adhesive properties of two hemispherical soap bubbles put into contact. The contact angle at the line connecting the three films is extracted by image analysis of the bubbles profiles. After the initial contact, the angle rapidly reaches a static value slightly larger than the standard 120^° angle expected from Plateau rule. This deviation is consistent with previous experimental and theoretical studies: it can be quantitatively predicted by taking into account the finite size of the Plateau border (the liquid volume trapped at the vertex) in the free energy minimization. The visco-elastic adhesion properties of the bubbles are further explored by measuring the deviation Δθ_d(t) of the contact angle from the static value as the distance between the two bubbles supports is sinusoidally modulated. It is found to linearly increase with Δr _c/r _c , where r_c is the radius of the central film and Δr _c the amplitude of modulation of this length induced by the displacement of the supports. The in-phase and out-of-phase components of Δθ_d(t) with the imposed modulation frequency are systematically probed, which reveals a transition from a viscous to an elastic response of the system with a crossover pulsation of the order 1rad · s^-1. Independent interfacial rheological measurements, obtained from an oscillating bubble experiment, allow us to develop a model of dynamic adhesion which is confronted to our experimental results. The relevance of such adhesive dynamic properties to the rheology of foams is briefly discussed using a perturbative approach to the Princen 2D model of foams.     

Adsorption of the anionic surfactant sodium dodecyl sulfate on a C18 column under micellar and high submicellar conditions in reversed‐phase liquid chromatography

Micellar liquid chromatography makes use of aqueous solutions or aqueous‐organic solutions containing a surfactant, at a concentration above its critical micelle concentration. In the mobile phase, the surfactant monomers aggregate to form micelles, whereas on the surface of the nonpolar alkyl‐bonded stationary phases they are significantly adsorbed. If the mobile phase contains a high concentration of organic solvent, micelles break down, and the amount of surfactant adsorbed on the stationary phase is reduced, giving rise to another chromatographic mode named high submicellar liquid chromatography. The presence of a thinner coating of surfactant enhances the selectivity and peak shape, especially for basic compounds. However, the risk of full desorption of surfactant is the main limitation in the high submicellar mode. This study examines the adsorption of the anionic surfactant sodium dodecyl sulfate under micellar and high submicellar conditions on a C₁₈ column, applying two methods. One of them uses a refractive index detector to obtain direct measurements of the adsorbed amount of sodium dodecyl sulfate, whereas the second method is based on the retention and peak shape for a set of cationic basic compounds that indirectly reveal the presence of adsorbed monomers of surfactant on the stationary phase.     

亲水头基大小对正负离子表面活性剂混合体系的影响

<正>负离子表面活性剂混合体系曾被认为是表面活性剂配方的禁忌,但通过增大表面活性剂头基的面积,正负混合体系在很宽的物质的量比下都不会产生沉淀,而且还会产生显著的增效效应。头基大的离子型表面活性剂甚至能够用来增溶难溶的反电荷表面活性剂。     

表面活性剂对部分水解聚丙烯酰胺溶液抗盐性的影响

通过实验研究了阴离子表面活性剂(SDS)、非离子表面活性剂(OP-10)、两性表面活性剂(C12BE)浓度及KCl浓度对部分水解聚丙烯酰胺(阴离子型,HPAM)水溶液黏度的影响规律,进而分析各因素对聚合物溶液抗盐性的影响。实验结果表明:当表面活性剂浓度低于临界缔合浓度CAC时,聚合物溶液黏度变化不大;高于CAC后,随着表面活性剂浓度增大,聚合物溶液黏度急剧增加;当表面活性剂浓度达到聚合物饱和浓度PSP时,聚合物溶液黏度达到最大值;再加入阴离子和两性表面活性剂,将导致黏度降低,而加入非离子表面活性剂不再改变聚合物溶液的黏度,无机盐KCl对聚合物溶液有双重作用,低浓度KCl促进聚合物溶液黏度升高,高浓度KCl则导致聚合物溶液黏度急剧降低后趋于稳定,在相同KCl浓度下,三种表面活性剂的抗盐能力表现为:SDSOP-10C12BE。     

Novel Enzymatic Potentiometric Approaches for Surfactant Analysis

The present study described a novel application of simple potentiometric enzymatic method for analysis of surfactants based on their inhibitory effect on acetylcholinesterase enzyme (AChE). The enzymatic activity was measured through monitoring hydrolysis of acetylcholine (ACh) with a disposable acetylcholine potentiometric sensor. Comprehensive investigations were carried out including the effect of incubation time, cholinesterase enzyme and the working calibration ranges. Based on inhibition of AChE, different cationic, anionic and nonionic surfactants were determined in the concentration range from 0 to 40 μg mL⁻¹ with detection limits reaching 0.07 μg mL⁻¹ depending on the nature of surfactants. The degree of AChE inhibition caused by different tested surfactants were as follows: cetylpyridinium chloride (CPC) > benzyldimethylhexadecyl ammonium chloride (BDHAC) > Hyamine (Hy)>cetyltrimethylammonium bromide (CTAB) > Triton X‐100 (TX‐100) > sodium dodecyl sulphate (SDS). The proposed method was applied for determination of surfactants in pharmaceutical formulation, detergents products and environmental samples with acceptable sensitivity and reproducibility.     

基于铕取代多金属氧簇的手性发光液晶材料

The incorporation of europium-substituted polyoxometalate (PM) into chiral amphiphiles is attractive for the fabrication of multifunctional chiral luminescent liquid crystalline materials. Chiral amphiphiles acted as good promoters to trigger the achiral PM to show induced supramolecular chirality through electrostatic interactions, as illustrated by circular dichroism (CD) spectra. Differential scanning calorimetry (DSC), polarized optical microscopy (POM), and temperature-dependent X-ray diffraction (XRD) analysis confirmed that the organic/inorganic hybrid polyoxometalate complex exhibited thermotropic mesomorphic behaviors. In a cast film, the complex displayed intrinsic luminescence that could be adjusted by accurately controlling the temperature. The electrostatic encapsulation of PM with chiral mesomorphic promoters provides an effective method for constructing PM-based chiral luminescent liquid crystalline materials.     

Headgroup effect on drag reduction and rheological properties of micellar solutions of quaternary ammonium surfactants

Two sets of cationic surfactants each with essentially the same alkyl chains but different headgroup structures were studied to investigate the effects of surfactant headgroup structure on micelle microstructures, drag reduction (DR) and rheological properties at certain counterion and surfactant concentrations. Cetyldimethylethylammonium bromide (CDMEAB) was compared with alkyltrimethyl ammonium bromide (CnTAB) and benzyldimethyl(hydrogenated tallow)ammonium chloride (DMHTB) was compared with alkyltrimethylammonium chloride (CmTAC), respectively. Surfactants with larger headgroups showed lower high temperature limits for DR. CDMEAB systems have better DR abilities than CnTAB below room temperature but the opposite is true at higher temperatures. DMHTB has stronger counterion binding ability than CmTAC, giving better DR properties than CmTAC at low counterion concentration, but has a lower upper temperature limit for DR. These results provide further understanding of the self-assembly nature of threadlike micelles of cationic surfactants and guidance for design of effective surfactant structures to meet particular DR requirements.     

Simultaneous spreading and evaporation: Recent developments

The recent progress in theoretical and experimental studies of simultaneous spreading and evaporation of liquid droplets on solid substrates is discussed for pure liquids including nanodroplets, nanosuspensions of inorganic particles (nanofluids) and surfactant solutions. Evaporation of both complete wetting and partial wetting liquids into a nonsaturated vapour atmosphere are considered. However, the main attention is paid to the case of partial wetting when the hysteresis of static contact angle takes place. In the case of complete wetting the spreading/evaporation process proceeds in two stages. A theory was suggested for this case and a good agreement with available experimental data was achieved. In the case of partial wetting the spreading/evaporation of a sessile droplet of pure liquid goes through four subsequent stages: (i) the initial stage, spreading, is relatively short (1–2 min) and therefore evaporation can be neglected during this stage; during the initial stage the contact angle reaches the value of advancing contact angle and the radius of the droplet base reaches its maximum value, (ii) the first stage of evaporation is characterised by the constant value of the radius of the droplet base; the value of the contact angle during the first stage decreases from static advancing to static receding contact angle; (iii) during the second stage of evaporation the contact angle remains constant and equal to its receding value, while the radius of the droplet base decreases; and (iv) at the third stage of evaporation both the contact angle and the radius of the droplet base decrease until the drop completely disappears. It has been shown theoretically and confirmed experimentally that during the first and second stages of evaporation the volume of droplet to power 2/3 decreases linearly with time. The universal dependence of the contact angle during the first stage and of the radius of the droplet base during the second stage on the reduced time has been derived theoretically and confirmed experimentally. The theory developed for pure liquids is applicable also to nanofluids, where a good agreement with the available experimental data has been found. However, in the case of evaporation of surfactant solutions the process deviates from the theoretical predictions for pure liquids at concentration below critical wetting concentration and is in agreement with the theoretical predictions at concentrations above it.     

Fabrication of carbon microcapsules containing silicon nanoparticles-carbon nanotubes nanocomposite by sol-gel method for anode in lithium ion battery

Carbon microcapsules containing silicon nanoparticles (Si NPs)-carbon nanotubes (CNTs) nanocomposite (Si-CNT@C) have been fabricated by a surfactant mediated sol-gel method followed by a carbonization process. Silicon nanoparticles-carbon nanotubes (Si-CNT) nanohybrids were produced by a wet-type beadsmill method. To obtain Si-CNT nanocomposites with spherical morphologies, a silica precursor (tetraethylorthosilicate, TEOS) and polymer (PMMA) mixture was employed as a structure-directing medium. Thus the Si-CNT/Silica-Polymer microspheres were prepared by an acid catalyzed sol-gel method. Then a carbon precursor such as polypyrrole (PPy) was incorporated onto the surfaces of pre-existing Si-CNT/silica-polymer to generate Si-CNT/Silica-Polymer@PPy microspheres. Subsequent thermal treatment of the precursor followed by wet etching of silica produced Si-CNT@C microcapsules. The intermediate silica/polymer must disappear during the carbonization and etching process resulting in the formation of an internal free space. The carbon precursor polymer should transform to carbon shell to encapsulate remaining Si-CNT nanocomposites. Therefore, hollow carbon microcapsules containing Si-CNT nanocomposites could be obtained (Si-CNT@C). The successful fabrication was confirmed by scanning electron microscopy (SEM) and X-ray diffraction (XRD). These final materials were employed for anode performance improvement in lithium ion battery. The cyclic performances of these Si-CNT@C microcapsules were measured with a lithium battery half cell tests.