Cu/MoO3-TiO2/SiO2上光催化CO2和C3H8合成异丁烯醛的研究

采用表面改性法和等体积浸渍法制备了金属修饰的负载型复合半导体材料Cu/MoO3-TiO2/SiO2, 用X射线衍射、 比表面积测定、 红外光谱、 拉曼光谱和紫外-可见漫反射等技术对固体材料的结构、 吸光性能和化学吸附性能进行了表征, 研究了该材料对CO2和丙烷合成异丁烯醛的光促表面催化规律. 结果表明, 半导体活性组分MoO3和TiO2在所制备的催化剂Cu/MoO3-TiO2/SiO2表面形成化学键, 并存在多种活性吸附位; 金属Cu的修饰拓展了固体材料对光源的响应范围, 提高了反应体系的吸光能力; 固体材料对CO2和丙烷的有效吸附使其在较低温度下就能促进异丁烯醛的紫外光化学合成, 反应选择性达到85％左右. 根据实验结果对光促CO2和丙烷表面催化合成异丁烯醛的机理进行了讨论.     

核-壳型聚丙烯酸酯复合乳液

简述了核-壳型聚丙烯酸酯复合乳液的合成方法、形态及其影响因素与判断方法、结构与性能等方面的研究进展;认为核-壳型复合乳液膜机械性能优良的原因是:核、壳两相间存在的过渡区适当地抑制了二者的相分离。     

Effect of multi-walled carbon nanotubes on non-isothermal crystallization kinetics of polyamide 6

The non-isothermal crystallization behaviors of multi-walled carbon nanotubes (MWNTs)/polyamide 6 (PA6) composites were investigated by differential scanning calorimetry (DSC). Three methods, namely, Avrami, Ozawa and Mo, were carried out to analyze the non-isothermal crystallization data. The results showed that the MWNTs in PA6 acted as effective nucleation agents. However the crystallization rate of composites obtained was lower than that of the neat PA6. It is indicated that the presence of MWNTs influenced the mechanism of nucleation and the growth of PA6 crystallites.     

Characterization of the barrier properties of composites of HDPE and purified cellulose fibers

The present work presents and discusses the interrelation between composition, morphology, thermal history, mechanical and barrier properties to oxygen and limonene of composites of HDPE/MA-PE/cellulose fibers of significant interest in, among others, food packaging applications. From the overall results, it was observed that increasing the loading of purified alpha-cellulose fibers in the polyethylene matrix beyond 10 wt.% led to a decrease in the permeability coefficient of d-limonene, effect which was found to be primarily related to a decrease in the overall solubility of this strongly plasticizing aroma component. On the other hand, the oxygen permeability was found to decrease to a significant extend with increasing fiber content beyond 5 wt.%, but this effect was more strongly ascribed to a significant decrease in the diffusion coefficient. Therefore, the fibers are thought to generate a more tortuous path for the non-interacting gas molecules to travel across the composites thickness, even when tested at high relative humidity conditions. Optimum fiber loading levels in terms of overall property balance were found to be around 20 wt.%.     

High temperature corrosion behaviour of M(Co,Ni)CrAIY-coatings on high temperature materials-microanalytical investigations

In our former investigations, the phenomenon high temperature corrosion (HTC) was described exemplarily on selected materialcoating combinations for blades of stationary gas turbines, mainly in the temperature region of up to 750° C. To answer the question, in which manner higher gas inlet and/or higher material surface temperature would influence the HTC behaviour, a special analytical technique—the integral layer profile analysis—was introduced to ameliorate concentration profile methods. By examining IN 738 LC specimens with CoCrAlY plasma spray coating, stressed by hot gas at 900° C, the limits of this system are shown by explaining the corrosion mechanism; the method is also used for other systems, e.g. U 520 with NiCrAlY coating at 750° C.     

黄麻塑料复合材料

本文介绍了国外黄麻塑料复合材料研究开发的历史和现状。说明利用各式黄麻纤维产物作为塑料增强剂以生产低成本、轻重量复合材料方面已取得成功,其发展前景具有很大吸引力。     

互通多孔碳/二氧化锰纳米复合材料的原位水热合成及电化学性能

以互通多孔碳（IPC）为载体，水热条件下在碳表面原位反应生成纳米结构的二氧化锰（MnO₂），制备互通多孔碳/二氧化锰纳米（IPC/MnO₂）复合电极材料. 采用扫描电镜（SEM），透射电镜（TEM），X射线衍射（XRD），热重分析（TGA）对其结构进行表征；采用循环伏安法、恒流充放电和交流阻抗对其电化学性能进行研究. 结果表明：生成的MnO₂均匀地负载在碳的表面，形成多层次结构，并且随着温度的升高IPC表面负载的MnO₂由纳米颗粒变为纳米片状结构；MnO₂纳米片具有典型的K-Birnessite 型晶体结构；复合物中MnO₂的含量约为34%（w）. 在100 ℃制备的IPC/MnO₂复合材料在三电极系统中最高比电容达到了411 F·g^-1；随着反应温度的升高,比容量先增长后基本保持不变. 以IPC/MnO₂为正极，活性炭（AC）为负极，1 mol·L^-1 Na₂SO₄溶液为电解液组装成IPC/MnO₂//AC 混合超级电容器，发现IPC/MnO₂电极的电容器其电位窗口从1 V扩展到1.8 V，容量可达86F·g^-1，且表现出良好的电容特性和大电流放电性能.     

聚苯乙烯—钛酸钡复合材料介电性能的研究

以聚苯乙烯与化学沉淀法钛酸钡陶瓷为基本组成，采用溶液共混，溶液聚合，表面处理后溶液聚合三种方法进行复合，发现后两种复合的钛酸钡颗粒表面发生界面变化，形成活性界面，使得溶液聚合法和表面处理后溶液聚合所得到的材料具有较低的介电损耗，在高频下能保持较高的介电系数。     

Investigations of the effect of viscosity of resin on the diffusion of pyrene in silicone polymer coatings using steady state fluorescence technique

The diffusion phenomenon of pyrene in silicone coatings prepared from various commercial silicone resins with different viscosities was investigated using steady state excimer fluorescence technique. The amount of pyrene lost from the coatings by diffusion at different temperatures ranging from 25 to 70 °C was estimated from the excimer emission intensity. The diffusion coefficients (D) and activation energy of diffusion of pyrene in silicone coatings were determined. It was found that the kinetic parameters of pyrene were comparable in all the four silicone coatings and independent of the viscosity of the resin. The D values were lower than those expected for pyrene in PDMS resins in the corresponding viscosity range. This may be attributed to restricted mobility of pyrene due to cross-linking of polymer chains in the cured silicone coatings.     

Novel composite anode materials for lithium ion batteries with low sensitivity towards humidity

Graphitic anode materials for lithium ion batteries processed under high humidity conditions show severe performance losses. The sensitivity of these materials towards humidity can be significantly reduced by adsorbing metal ions like silver or copper ions, with subsequent heat treatment of these composites. Results of X-ray photoelectron spectroscopy, high-resolution electron microscopy, thermogravimetry, and differential thermal analysis indicate that the deposited metals exist in metallic and carbide, M_xC (M=Cu or Ag), forms. They remove or cover (i.e. deactivate) active hydrophilic sites at the surface of the graphite. These composites absorb less water during processing. The electrochemical performance, including reversible capacity, coulombic efficiency in the first cycle, and cycling behavior, is markedly improved. This approach provides a potentially powerful method to manufacture lithium ion batteries under less demanding conditions.Presented at the 3rd International Meeting on Advanced Batteries and Accumulators, 16–20 June 2002, Brno, Czech Republic