Photooxidation Of Arsenobetaine And Arsenocholine To Generate Arsines Previous To Icp-Oes Measurement

Abstract

A photolytic method, which uses UV irradiation (254 nm) and K₂S₂O₈ in alkaline media has been optimized for the speciation of arsenite, arsenate, monomethylarsonic and dimethylarsinic acid, arsenobetaine and arsenocholine. Under these conditions it is possible to obtain not only simple species from arsenobetaine and arsenocholine with good yields, but also to establish the optimum conditions to carry out the process on-line with HG-ICP/OES for the determination of these species.

The products obtained in the photolytic reaction are introduced into the reduction chamber to form arsines. According to the results obtained from the ICP measurements, the recoveries obtained are about 100% and the procedure has a good reproducibility.     

Simultaneous Determination of Arsenic and Lead in Vegetable Oil by Atomic Fluorescence Spectrometry after Vortex-Assisted Extraction

Hydride generation atomic fluorescence spectrometry (HG-AFS) is used for the determination of hydride-forming elements due to its high sensitivity, simplicity, and low cost. A new HG-AFS method for the simultaneous determination of arsenic and lead in vegetable oil is reported. Vortex-assisted extraction with dilute nitric acid was used to isolate arsenic and lead from vegetable oil. The conditions influencing the fluorescence signal, including the carrier fluid, oxidizing agent, and reducing agent, were optimized. The interferences of coexisting ions were also evaluated. Under the optimized conditions, the limits of detection were 0.6 and 0.4?µg?kg^?1 for arsenic and lead. The recoveries were from 84.4 to 105% for both metals in vegetable oil. The optimized method was used for the determination of arsenic and lead in commercial vegetable oil. The analytical results by this approach were in good agreement with values obtained by inductively coupled plasma mass spectrometry with microwave digestion.     

A modified sequential extraction method for arsenic fractionation in sediments

A modified sequential extraction method was developed to characterize arsenic (As) associated with different solid constituents in surficial deposits (sediments), which are unconsolidated glacial deposits overlying bedrock. Current sequential extraction methods produce a significant amount of unresolved As in the residual fraction, but our proposed scheme can fractionate >90% of the As present in sediments. Sediment samples containing different As concentrations (3–35 μg g⁻¹) were used to assess the developed method. The pooled amount of As recovered from all the fractions using the developed method was similar (83–122%) to the total As extracted by acid digestion. The concentrations of As in different fractions using the developed scheme were comparable (89–106%) to the As fractions obtained by other existing methods. The developed method was also evaluated for the sequential extraction of other metals such as copper (Cu), cobalt (Co), chromium (Cr) and strontium (Sr) in the sediment samples. The pooled concentrations of these four individual metals from all the fractions were similar (96–104%) to their total concentrations extracted by acid digestion. During method development, we used extractants that did not contain chloride to eliminate formation of polyatomic ions of argon chloride (⁴⁰Ar³⁵Cl) that interfered with ⁷⁵As when analyzed using inductively coupled plasma mass spectrometer (ICP-MS). The results suggest that the developed method can reliably be employed for complete As and other metals’ fractionation in sediments using ICP-MS.     

The effect of cooking and washing rice on the bio-accessibility of As,Cu, Fe,V and Zn using an on-line continuous leaching method

A previously developed method based on continuous on-line leaching with artificial gastro-intestinal fluids was used to determine the bio-accessible fraction of As, Cu, Fe, V and Zn in brown and white rice from California by inductively coupled mass spectrometry (ICP-MS). Saliva generally accounted for the largest percentage of total element leached in comparison to gastric and intestinal juices. Arsenic speciation analysis was performed on the saliva and gastric juice leachates using ion exchange chromatography coupled to ICP-MS. The four most toxic species of As (As(III), monomethylarsonic acid (MMA), dimethylarsinic acid (DMA) and As(V)), as well as Cl⁻ in the gastric juice leachate, were successfully separated within 5.5 min using a simple nitric acid gradient. While cooking rice had relatively little effect on total bio-accessibility, a change in species from As(V) and DMA to As(III) was observed for both types of rice. On the other hand, washing the rice with doubly deionized water prior to cooking removed a large percentage of the total bio-accessible fraction of As, Cu, Fe, V and Zn.     

Advances in arsenic speciation techniques

The present review describes the speciation techniques of arsenic. The principal advanced techniques discussed are gas chromatography, reversed-phase liquid chromatography, ion chromatography, capillary electrophoresis. Some other techniques are also mentioned. The extraction procedures of arsenic species from unknown samples are also discussed. Arsenic speciation is summarized in tabular form and optimizing parameters are also discussed.     

Observations on toxicologically relevant arsenic in urine in adult offspring of families with Balkan Endemic Nephropathy and controls by batch hydride generation atomic absorption spectrometry

The aim of this study was to develop a method for the characterization of internal exposure to arsenic, which is thought to play a role in the development of a kidney disease, known as Balkan Endemic Nephropathy, typical for a district in Bulgaria, and to investigate whether the As body burden differs in the offspring versus control individuals. For this case study, an analytical procedure for the determination of toxicologically relevant arsenic (the sum of arsenite, arsenate, monomethylarsonate, and dimethylarsinate) in urine by batch-type hydride generation atomic absorption spectrometry was developed. Optimization experiments for levelling off the sensitivity of inorganic arsenic and its mono- and dimethylated species in dilute HCl–L-cysteine medium were performed. The limit of detection for hydride forming arsenic fraction was 0.5?ng As, i.e. 0.25?µg?L^?1 in 10?mL of 1?+?4 v/v diluted urine. The relative standard deviation was typically 1.5–1.8% for aqueous solution and 2–6% for urine samples at 1.0?µg?L^?1 As. The sample throughput rate was 15?h^?1. No statistical correlation and cross-correlation between individuals case-control and sex at 95% confidence were found: controls (n?=?99), mean 3.5?±?2.1 (SD), range 0.9–10.4, median 3.0?µg?L^?1 As and cases (n?=?102), mean 3.6?±?2.2 (SD), range 0.5–11.0, median 3.2?µg?L^?1 As. On the basis of this study, arsenic can be excluded as a factor involved in BEN development.     

Separation and Detection of Arsenic and Selenium Species in Environmental Samples by HPLC-ICP-MS

A method is presented for arsenic speciation analysis of an oyster sample using ion chromatography coupled with an inductively coupled plasma mass spectrometry (ICP-MS) instrument. A strong anion exchange resin was employed with a step gradient elution of 0.1 mM/0.1 M K 2 SO 4 at pH 10.2. Arsenobetaine and dimethylarsinic acid were determined following extraction based on trypsin enzymolysis with 95-100% extraction efficiency. Limits of detection in the range 0.1-0.3 mg kg m 1 of arsenic were obtained for organic arsenic species. No inorganic arsenic was detected. Validation was performed using TORT-2 as a certified reference material. Although high performance liquid chromatography (HPLC) coupled to ICP-MS is an effective method for speciation analysis it is not always necessary to obtain such a detailed picture. A simple liquid chromatographic separation technique based upon mini-column technology is presented. It was developed to obtain a fast, efficient and reliable separation of inorganic from organic, i.e. assumed toxic from non-toxic, arsenic and selenium species suitable for use as an initial screening method for environmental analysis. Two types of strong anion exchange resin were tested. Excellent separation was obtained for both min-column resins and analysis times were within 7 min. Limits of detection obtained for inorganic arsenic, organic arsenic, selenomethionine, Se IV and Se VI were 1.6, 1.8, 66, 32 and 22 µg kg m 1 , respectively.     

121,123Sb and 75As NMR and NQR investigation of the tetrahedrite (Cu12Sb4S13) – Tennantite (Cu12As4S13) system and other metal arsenides

This work is motivated by the recent developments in online minerals analysis in the mining and minerals processing industry via nuclear quadrupole resonance (NQR). Here we describe a nuclear magnetic resonance (NMR) and NQR study of the minerals tennantite (Cu₁₂As₄S₁₃) and tetrahedrite (Cu₁₂ Sb₄S₁₃). In the first part NQR lines associated with ⁷⁵As in tennantite and ^121,123Sb isotopes in tetrahedrite are reported. The spectroscopy has been restricted to an ambient temperature studies in accord with typical industrial conditions. The second part of this contribution reports nuclear quadrupole-perturbed NMR findings on further, only partially characterised, metal arsenides. The findings enhance the detection capabilities of NQR based analysers for online measurement applications and may aid to control arsenic and antimony concentrations in metal processing stages.     

Stripping Analysis of As(III) by Means of Screen‐Printed Electrodes Modified with Gold Nanoparticles and Carbon Black Nanocomposite

A novel sensor based on carbon black‐gold nanoparticle nanocomposite modified screen‐printed electrode (CB‐AuNPs/SPE) for the detection of As(III) has been developed. The sensor was prepared modifying the SPE with CB and AuNPs by a drop casting automatable deposition. The As(III) was detected by CB‐AuNPs/SPE using anodic stripping voltammetry, with a high sensitivity (673±6 µA µM^?1 cm^?2) and reaching a LOD of 0.4 ppb. Finally, CB‐AuNPs/SPE has been applied to As(III) trace analysis in drinking water, obtaining satisfactory recovery values (99±9 %).     

Simultaneous hyperaccumulation of arsenic and antimony in Cretan brake fern: Evidence of plant uptake and subcellular distributions

Arsenic (As) and antimony (Sb) show similar chemical properties and often present together in sulfide ores. Currently, phenomenon of co-contamination of As and Sb at some sites of the world has been increasingly emerged. The present study was conducted to explore the potential of Pteris cretica L. (Cretan brake fern), an arsenic (As) hyperaccumulator, to simultaneously accumulate As and Sb under hydroponic conditions. Arsenic was imposed at medium and high levels of 5 mg L^− 1 and 20 mg L^− 1, while Sb was imposed either single or co-presence with As at medium and high levels of 10 mg L^− 1 and 20 mg L^− 1, with no As and Sb addition as the control. The single and interactive effects of As and Sb on their uptake and subcellular distributions were analyzed. Cretan brake fern could accumulate high concentrations of As and Sb, with the highest concentrations of As and Sb been recorded as 1677.2 mg kg^− 1 and 1516.5 mg kg^− 1 in the fronds, respectively. Arsenic and Sb were found mainly in cytosol, while less in cell wall and cytoplasmic organelles. Sb uptake by Cretan brake fern was enhanced with increasing As levels, which was accompanied with an increase of Sb but a decrease of As in cytosol fractions. Arsenic uptake was slightly enhanced whereas suppressed when Sb was co-present in a medium and high level, respectively; however, in both conditions, As was found to be decreased in cytosol of the above ground parts as fronds and stems of Cretan brake fern. The results demonstrate Cretan brake fern can simultaneously hyperaccumulate As and Sb, thus is valued in phytoremediation of As and Sb co-contamination.