A comparison of sequential extraction techniques for determining arsenic fractionation in synthetic mineral mixtures

The sequential extraction methods according to Tessier et al. [1], Borovec et al. [2], Zhang and Moore [3] and Hall et al. [4] have been tested for their suitability for arsenic fractionation in samples of artificially prepared mineral mixtures. Mixtures containing different amounts of As-containing phases were prepared so that their compositions corresponded to weathering products on As-bearing ore deposits. A comparison of different procedures on simple mineral mixtures containing calcium arsenate (CaHAsO₄·H₂O), As-bearing goethite (FeOOH) and arsenopyrite (FeAsS) showed that only the results of the Hall method satisfactorily correspond to the expected arsenic distribution. A detailed verification of the Hall method was subsequently carried out on most complex synthetic mineral mixtures with varying amounts of As-containing kaolinite and carbonate, calcium arsenate, As-bearing goethite and arsenopyrite. The results confirm that the Hall method cannot be fully employed for an accurate As speciation but may be applied for a route identification of As distribution between "labile", "medium-labile" and "residual" forms in heavily polluted soils.     

Reactions of 2-arsa- and 2-stiba-1,3-dionato lithium complexes with group 4-7 metal halides

The reactions of a range of 2-arsa- and 2-stiba-1,3-dionato lithium complexes with group 4-7 metals have been investigated. These have given rise to several complexes in which an arsadionate acts as a chelating ligand; [V{η²-O,O-OC(Bu^t)AsC(Bu^t)O}₃], [M{η²-O,O-OC(Bu^t)AsC(Bu^t)O}₂(DME)], M=Cr or Mn; or as an η¹-As-diacylarsenide, [MnBr(CO)₄{As[C(O)Bu^t]₂Li(DME)}]₂. In addition, reactions of lithium arsadionates with TaCl₅ have led to metal mediated arsadionate decomposition reactions and arsadionate oxidative coupling reactions to give the known arsaalkyne tetramer, As₄C₄Bu^t₄, and the new tetraacyldiarsane, [{As[C(O)Mes]₂}₂] Mes=mesityl, respectively. The treatment of several lithium arsadionates with [MoBr₂(CO)₂(PPh₃)₂] has also initiated arsadionate decomposition reactions and the formation of the metal carboxylate complexes, [MoBr(CO)₂{η²-O₂C(R)}(PPh₃)₂] R=Bu^t, Ph, Mes. The X-ray crystal structures of six of the prepared complexes are discussed.     

HPLC-ICP-MS在紫菜中砷形态分析的应用

通过HPLC－ICP－MS联用技术初步探讨了紫菜中砷的形态；选用了纯水萃取，再用甲醇稀释，用阴离子交换色谱柱经HPLC分离，再用ICP－MS测定，实验发现了2个未知形态色谱峰；该技术将液相色谱的分离技术与ICP－MS高灵敏度的检测方式相结合，具有分离效果好，灵敏度高，耗样量少，速度快，线性范围宽等优点。     

Analysis and Speciation of Traces of Arsenic in Environmental,Food and Industrial Samples by Voltammetry: a Review

Voltammetric approaches for the determination of arsenic and speciation at trace levels are critically appraised in a review covering the literature from 1970 to 2002. Special attention is devoted to stripping modes and to issues related to the choice of working material and supporting electrolyte. A section is dedicated to the management of real samples and aspects of sample preparation. An extensive compilation, organized by real sample type, gathers essential experimental conditions. Potentiometric stripping analysis is introduced for sake of comparison. The coupling of voltammetric detection or preaccumulation with FIA, chromatography, capillary electrophoresis and ICP techniques is also addressed.     

The Electrochemical Detection of Arsenic(III) at a Silver Electrode

A study of three electrode substrates namely gold, platinum and silver, for arsenic detection via anodic stripping voltammetry is reported. Hitherto it has been accepted that gold is the most suitable metallic surface for use in this context, as suggested by Forsberg and co‐workers (Forsberg, G.; O'Laughlin, J. W.; Megargle, R. G. Anal. Chem. 1975, 47, 1586.). We revisit these experiments and find that by switching from hydrochloric acid to nitric acid the oxidation of silver that had previously masked the arsenic stripping signal at this surface is shifted considerably enough to allow a clear, analytically reliable As(III) stripping signal to be detected. In contrast to silver and gold platinum is found to have poor performance as an electrode substrate for arsenic detection. Using ASV a LOD of 6.3×10^?7 M is found for As(III) detection at a silver electrode, similar to that which we have previously reported at a gold electrode (A. O. Simm, C. E. Banks and R. G. Compton. Electroanalysis, 2005, 17, 335.) The use of ultrasound was then investigated to further reduce the LOD, which was found to be 1.4×10^?8 M. Apart from reduced cost of silver it also has an added advantage over gold in that it has a higher hydrogen reduction overvoltage enabling a 100 mV more negative deposition potential to be used before the onset of hydrogen evolution when compared to a gold electrode.     

Speciation of arsenic in ground water samples: A comparative study of CE-UV, HG-AAS and LC-ICP-MS

The performance of capillary electrophoresis-ultraviolet detector (CE-UV), hydride generation-atomic absorption spectrometry (HG-AAS) and liquid chromatography-inductively coupled plasma mass spectrometry (LC-ICP-MS) have been compared for the speciation of arsenic (As) in groundwater samples. Two inorganic As species, arsenite (As^III), arsenate (As^V) and one organo species dimethyl arsenic acid (DMA) were mainly considered for this study as these are known to be predominant in water. Under optimal analytical conditions, limits of detection (LD) ranging from 0.10 (As^III, AsT) to 0.19 (DMA) μg/l for HG-AAS, 100 (As^III, DMA) to 500 (As^V) μg/l for CE-UV and 0.1 (DMA, MMA) to 0.2 (As^III, As^V) μg/l for LC-ICP-MS, allowed the determination of the above three species present in these samples. Results obtained by all the three methods are well correlated (r² = 0.996*** for total As) with the precision of <5% R.S.D. except CE-UV. The effect of interfering ions (e.g. Fe²⁺, Fe³⁺, SO₄²⁻ and Cl⁻) commonly found in ground water on separation and estimation of As species were studied and corrected for. Spike recovery was tested and found to be 80-110% at 0.5 μg/l As standard except CE-UV where only 50% of the analyte was recovered. Comparison of these results shows that LC-ICP-MS is the best choice for routine analysis of As species in ground water samples.     

Determination of trace arsenic on hanging copper amalgam drop electrode

Hanging copper amalgam drop electrode has been applied for trace determination of arsenic by cathodic stripping analysis. Detection limit for As(III) as low as 0.33 nM (0.02 μg/L) at deposition time (240 s) could be obtained. For seven successive determinations of As(III) at concentration of 5 nM relative standard deviation was 2.5% (n = 7). Interferences from selected metals and surfactant substances were examined. Absence of copper ions in sample solution causes easier optimization and makes method less vulnerable on contamination. The developed method was validated by analysis of certified reference materials (CRMs) and applied to arsenic determinations in natural water samples.     

Chemical modifiers in arsenic determination in biological materials by tungsten coil electrothermal atomic absorption spectrometry

Palladium, iridium, and rhodium are evaluated as possible chemical modifiers in the determination of As in digest solutions of biological materials (human hair and clam) by tungsten coil electrothermal atomic absorption spectrophotometry (TCA-AAS). The modifier in solution was applied onto the coil and thermally pre-reduced; the pre-reduction conditions, the amount of modifier, and the thermal program were optimized. Palladium was not satisfactory, whereas Ir and Rh were effective modifiers and rendered better relative sensitivity for As by a factor of 1.4 and 1.9, respectively compared to the case without modifier. Upon optimization of thermal conditions for As in pre-reduced Ir (2.0 µg) and Rh (2.0 µg) modifiers and in the digest solutions of the study matrices, Rh (2.0 µg) was more effective modifier and was selected as such. The mean within-day repeatability was 2.8% in consecutive measurements (25–100 µg L^–1) (3 cycles, each of n=6) and confirmed good short-term stability of the absorbance measurements. The mean reproducibility was 4.4% (n=20 in a 3-day period) and the detection limit (3 _blank/slope) was 29 pg (n=15). The useful coil lifetime in Rh modifier was extended to 300–400 firings. Validation was by determination of As in the certified reference material (CRM) of Oyster tissue solution with a percentage relative error (E _rel%) of 2% and percentage relative standard deviation (RSD%) of 3% (n=4), and by analytical recovery of As spiked in CRM of human hair [94±8% (n=4)]. The methodology is simple, fast (sample readout frequency 21 h^–1), reliable, of low cost, and was applied to the determination of As in hair samples of exposed and unexposed workers.     

Benefits of high resolution IC-ICP-MS for the routine analysis of inorganic and organic arsenic species in food products of marine and terrestrial origin

A recently developed and validated method for simultaneous determination of 17 inorganic and organic arsenic compounds in marine biota has been successfully applied to routine analysis of different food products, including fish, shellfish, edible algae, rice, and other types of grain. During one year, approximately 250 food samples were analyzed, mostly fish and rice. Long-term stability and robustness of the system was observed and reproducible results for certified reference materials were ensured by means of control charts. The separation was performed by ion-pair chromatography on an anion-exchange column to separate anionic, neutral, and cationic arsenic species in one chromatographic run. Hyphenation to ICP–MS allowed element-specific and sensitive detection of the different arsenic species with a detection limit as low as 8 ng As L^–1 in the sample extract, which is equivalent to 2 ng As g^–1 in the original sample. Special emphasis was laid on the analysis of marine algae and rice samples. These food types can contain elevated levels of the very toxic inorganic arsenic species (up to 90% in rice) and therefore are the focus of interest in the food industry. In marine algae, inorganic arsenic was mainly present as arsenate whereas in rice arsenite predominated.     

用石墨炉原子吸收法测定水质中微量砷,硒的探讨

采用石墨炉原子吸收法测定水中微量砷，硒，经大量实验条件摸索，选择不同仪器分析工作条件，找出了最佳升温程序条件，特别是原子化时气流控制，使分析方法的检出限降低为：Ａｓ０．６μｇ／Ｌ，Ｓｅ０．５μｇ／Ｌ。线性范围；Ａｓ０．０００－０．１２０ｍｇ／Ｌ，Ｓｅ０．０００－０．０２４ｍｇ／Ｌ；精密度，相对标准偏差分别为：Ａｓ１．２６％，３．６７％，Ｓｅ２．５６％，４．５７％，回收率为：Ａｓ９８．０％－１１０．