Numerical simulation on bolted rock joint shearing performance

A Double Shear Model(DSM)was used in a numerical simulation on bolted rock joint shearing performance.An entire bolt deformed as the letter"U"under a shear load between two joints.Near the bolt-joint intersection,the bolt partly deformed as the letter"Z".There were two critical points along the bolt: one was at the bolt-joint intersection with zero bending moment and the other at the maximum bending moment(plastic hinge)with zero shear stress.The blocks on two sides slid along the bolt as it deformed.A separation area was found between the two joint contact surfaces of the middle rock block and sided block.This area of separation was related to bolt diameter and external forces.We assume that this area is related to the work of external forces.Further research is needed.     

新型半刚性网壳锚喷支护技术在软岩巷道中的适用性研究

通过对钢筋网壳锚喷支护的技术特色、结构特点、支护原理的研究,分析了半刚性网壳支护结构对软岩支护的适应性。并完成了室内整架载荷试验。结合在桃园矿的应用情况,阐述了其支护参数选择和施工工艺,并对其进行现场监测,分析了这种新型支护形式的支护性能。实践证明,空间网壳锚喷支护结构与围岩相互作用的整体性好,具有良好的力学性能与较高的承载能力,是软岩巷道中的一种既经济又安全可靠的支护结构形式。     

某反倾向岩质边坡地震稳定性数值模拟

以雅泸高速公路K136＋150～K136＋300 m段反倾向岩质边坡为例,采用基于离散元法原理的计算软件——UDEC,在充分研究边坡工程地质条件的基础上,模拟研究了反倾向岩质边坡在地震作用下的变形破坏机制及失稳破坏模式,进而分析了边坡的稳定性。结果表明：边坡在地震作用下其变形破坏是＂岩体松动→倾倒→崩塌＂的过程,此过程经历的时间较短,往往是在振动持时内完成。     

Similarity identification method on formational interfaces and application in general granite

An instrumented drilling system can be applied for the acquisition of drilling process parameters.The system can provide continuous and huge data for geotechnical engineering.However, due to the complexity of ground strata, the variation in the drilling parameters with stratigraphical characteristics is great and the correlation between likely comparable parameters is not high, which limits the use of conventional correlation approaches in this field.How to use the data for engineering and how to get a reasonable interpretation for the relationships among the drilling parameters, as well as between a drilling parameter and formational character-istics, become a technical choke point for the development and application of the instrumented drilling system.Based on similarity criteria, the extraction of sample data and characteristics, the pretreatment of data and feature matching algorithms have been ana-lyzed and an approach of slope coefficient searching identification has been established.A case study was carried out for the similar-ity between the rotational speed of the drill bit, flushing pressure, and effective thrust force graphics in general weathered granite.The result shows that the similarity coefficients between the rotational speed of the drill bit, flushing pressure, and effective thrust force are 0.72 and 0.83, respectively.Although there are differences between the distances of the graphics, the curves of both rota- tional speed and flushing pressure agree with the effective thrust curve in shape, which provides a possible method for the identifica- tion of various formations by use of the similarity between feature drilling parameters.     

Seepage-stress coupling constitutive model of anisotropic soft rock

To provide a seepage-stress coupling constitutive model that can directly describe the seepage-stress coupling relationship, a series of one-dimensional seepage-stress coupling tests on two kinds of soft rock (argillaceous siltstone and brown mudstone) were performed by using an MTS-815.02 tri-axial rock mechanics test system, with which the stress—strain curves according to the seepage variation were obtained. Based on the experimental results and by employing Hooke’s law, the formulation of the coefficient of strain-dependent permeability was presented and introduced to establish a coupling model. In addition, the mathematical expression and the incremental formulation for coupling model were advanced, in which five parameters that can be respectively determined by using the experimental results were included. The calculated results show that the proposed coupling model is capable of simulating the stress—strain relationship with considering the seepage-stress coupling in the nonlinear elastic stage of two kinds of soft rock. Foundation item: Projects(50378069, 50639090) supported by the National Natural Science Foundation of China; Project(50639090) supported by the Joint Fund of Yalong River Hydropower Development, China     

Comprehensive assessment on dynamic roof instability under fractured rock mass conditions in the excavation disturbed zone

The damage process of fractured rock mass showed that the fracture in rocks induced roof collapse in Yangchangwan Coal Mine,China.The rock mass was particularly weak and fractured.There occurred 6 large-scale dynamical roof falls in the excavation disturbed zone (EDZ) with the collapsing volume of 216 m3.First,the field detailed geological environment,regional seismic dy-namics,and dynamic instability of roadways were generally investigated.Second,the field multiple-index monitoring measurements for detecting the deep delamination of the roof,convergence deformation,bolt-cable load,acoustic emission (AE) characteristic pa-rameters,total AE events,AE energy-releasing rate,rock mass fracture,and damage were arranged.Finally,according to the time-space-strength relations,a quantitative assessment of the influence of rock-mass damage on the dynamic roof instability was accomplished.     

Prevention and forecasting of rock burst hazards in coal mines

Rock bursts signify extreme behavior in coal mine strata and severely threaten the safety of the lives of miners, as well as the effectiveness and productivity of miners. In our study, an elastic-plastic-brittle model for the deformation and failure of coal/rock was established through theoretical analyses, laboratory experiments and field testing, simulation and other means, which perfectly predict sudden and delayed rock bursts. Based on electromagnetic emission (EME), acoustic emission (AE) and microseism (MS) effects in the process from deformation until impact rupture of coal-rock combination samples, a multi-parameter identification of premonitory technology was formed, largely depending on these three forms of emission. Thus a system of classification for forecasting rock bursts in space and time was established. We have presented the intensity weakening theory for rock bursts and a strong-soft-strong (3S) structural model for controlling the impact on rock surrounding roadways, with the objective of laying a theoretical foundation and establishing references for parameters for the weakening control of rock bursts. For the purpose of prevention, key technical parameters of directional hydraulic fracturing are revealed. Based on these results, as well as those from deep-hole controlled blasting in coal seams and rock, integrated control techniques were established and anti-impact hydraulic props, suitable for roadways subject to hazards from rockbursts have also been developed. These technologies have been widely used in most coal mines in China, subject to these hazards and have achieved remarkable economic and social benefits.     

Zonal disintegration phenomenon in enclosing rock mass surrounding deep tunnels -- Elasto-plastic analysis of stress field of enclosing rock mass

The zonal disintegration phenomenon (ZDP) is a typical phenomenon in deep block rock masses. In order to investigate the mechanism of ZDP, an improved non-linear Hock-Brown strength criterion and a bi-linear constitutive model of rock mass were used to analyze the elasto-plastic stress field of the enclosing rock mass around a deep round tunnel. The radius of the plastic region and stress of the enclosing rock mass were obtained by introducing dimensionless parameters of radial distance. The results show that tunneling in deep rock mass causes a maximum stress zone to appear in the vicinity of the boundary of the elastic and the plas-tic zone in the surrounding rock mass. Under the compression of a large tangential force and a small radial force, the rock mass in the maximum stress zone was in an approximate uniaxial loading state, which could lead to a split failure in the rock mass.     

胶结物对东营凹陷储层砂岩弹性特征的影响

储层岩石的地震弹性属性是进行油气储层勘探及动态监测的基础。系统选取东营凹陷古近系各层段砂岩样品250块（以沙河街组为主）,在模拟储层条件下利用脉冲穿透法测试样品的纵、横波速度。样品在纵波速度一泊松比交汇图中表现出两种主要变化趋势,分别对应泥质与钙质胶结物的影响;在每个变化趋势中随泥质含量与钙质胶结物含量的增加,岩石结构从颗粒所构成的骨架支撑逐渐表现为基质支撑,弹性波能量的传播也从通过颗粒接触边界转变为通过岩石基质传播,这是使砂岩样品测试结果表现出两种截然不同变化趋势的主要原因,为利用岩石物理特性从地震资料中提取岩石结构、沉积与成岩特征的信息提供了依据。     

基于偶极横波资料的火山岩裂缝及油气识别

火山岩油气藏已成为重要的油气勘探目标和储量增长点.在火山岩的地层评价中,裂缝与油气识别一直是一个核心问题.针对地层矿物成分与岩性十分复杂、常规测井方法很难准确快速识别,应用声波能量衰减对于天然裂缝极为敏感特性,利用斯伦贝谢偶极横波资料可以计算纵、横波及斯通利波能量衰减的特性,实现对裂缝的有效识别.在岩性、物性等因素基本一致的条件下,利用纵、横波能量重叠、泊松比、波速比还可以较好地识别气层.克拉玛依火山岩地层的实际应用效果表明,偶极横波资料在火山岩地层评价中具有十分重要的作用,为火山岩地层裂缝与油气识别开辟了新的途径.