基于GPS循环平稳特性的盲波束形成算法改进

在卫星导航自适应阵列抗干扰中,为避免先验信息误差和阵列误差对自适应波束形成性能的影响,可采用基于正交投影和导航信号循环平稳特性的盲波束形成算法(OCAB)。针对GPS信号,采用周期延迟信号处理的OCAB算法(CDOCAB)时,由于数据长度有限,噪声循环自相关函数估计量不为零,因此将影响循环平稳方法的性能,而采用解重扩数据辅助的OCAB算法(DS-OCAB)可以避免噪声估计误差的影响。将两种算法进行仿真比较,仿真结果表明,DS-OCAB算法可在少数据量的情况下保证算法性能不下降,提高算法的稳健性。     

SVM自适应波束成形算法

在天线阵列过载,以及强干扰与期望用户信号夹角过近的情况下,传统的线性阵列信号处理算法,如MMSE(minimum mean-squareerror)、NLMS(Normalized Least Mean Squares)等表现并不理想。SVM(SupportVectorMachine)是机器学习领域的最新成果,有较强的泛化能力,收敛快以及低复杂度等优点。本文提出了在上行波束成形中使用SVM算法,提高空域滤波的分辨率,与其他相关算法相比较,系统性能有了明显的改进。     

基于加权最小二乘的宽带波束形成算法

宽带波束形成技术是阵列信号处理研究的一个重要方向。基阵对信号的响应特性随频率而改变导致通过基阵的宽带信号产生波形畸变。恒定束宽波束形成可以实现在信号带宽内基阵波束图主瓣宽度保持恒定。主要研究基于加权最小二乘的恒定束宽宽带数字波束形成方法及其实现,MATLAB仿真实验表明算法的正确性和有效性。     

基于迭代二阶锥的唯相位波束形成

唯相位自适应波束形成技术对普通相控阵雷达自适应干扰抑制是非常重要的,在数字阵列雷达中,唯相位技术则可以充分利用各阵元发射模块微波功率从而提高雷达的威力。该文提出了一种新的唯相位波束形成方法,假定初始唯相位权重矢量有个较小的相位扰动,将唯相位模型的目标函数和约束函数在该相位扰动区域内分别用泰勒一阶展开式来近似,则可以将原来的非凸问题转化为凸优化问题,通过二阶锥规划方法(SOCP)求得使当前目标函数最小的扰动矢量,然后更新得到新的权重矢量并代替原来的权重矢量,重复上述迭代过程直到满足停止条件,可以得到满足要求的唯相位权重。计算机仿真结果验证了该方法的正确性和有效性。     

Joint Transmit Beamforming and Power Control for CDMA System

1　Introduction　Power control and beamforming are two main methods toreduce interference in CDMA cellular communication sys tem. In power control, the transmitters powers are constant ly adjusted when the instantaneous SIR is not equal to targetSIR, so that the quality of weak links is improved. Base sta tion equipped with antenna arrays may adjust their beam pat terns so that they have maximum gain towards the directionsof target mobiles and minimum gain towards the other direc tio…     

Efficient handover measurement technique for small‐cell networks using a virtual cell synchronization signal

A small‐cell network (SCN) constructed by splitting a macro‐cell into numerous small cells using an active antenna array system is studied. A synchronization signal appropriate for the SCN, virtually generated by an eNodeB with 3D beamforming, is proposed for efficient handover in SCNs. The virtual cell synchronization signal (VCSS) carries a macro‐cell ID (MCID) and virtual‐cell ID (VCID) in a hierarchical manner, allowing us to distinguish between an intra‐cell handover (virtual cell handover within a cell without changing the serving eNodeB) and inter‐cell handover (virtual cell handovers across cells while changing the serving eNodeB) in SCNs. Using the signal metrics obtained by the VCSS, an efficient handover measurement technique is proposed which can significantly reduce the processing time and overhead by distinguishing between the intra‐cell/inter‐cell handovers. The performance of the proposed technique is evaluated by simulating two different deployment scenarios of LTE‐based SCN with 3D beamforming. Copyright © 2017 John Wiley & Sons, Ltd.     

Robust adaptive beamforming for large-scale arrays

For a large-scale adaptive array, heavy computational load and high-rate data transmission are two challenges in the implementation of an adaptive digital beamforming system. Moreover, the large-scale array becomes extremely sensitive to array imperfections. First, based on a restructured recursive linearly constrained minimum variance algorithm and a gradient-based optimization method, a new robust recursive linearly constrained minimum variance (RRLCMV) algorithm is proposed in this paper. The computational load of the RRLCMV algorithm is on the order of o(N), which is less than that of the conventional gradient-based robust adaptive algorithm. Then, a new efficient parallel robust recursive linearly constrained minimum variance (PRRLCMV) adaptive algorithm is proposed by appropriately partitioning the RRLCMV algorithm into a number of operational modules. It can be easily executed in a distributed-parallel-processing fashion, sequentially and in parallel. As a result, the PRRLCMV algorithm provides an effective solution that can alleviate the bottleneck of high-rate data transmission and reduce the computational cost. Finally, an implementation scheme of the PRRLCMV algorithm based on a distributed-parallel-processing system is also proposed. The simulation results demonstrate that the new PRRLCMV algorithm can significantly reduce the degradation due to various array errors.     

基于数字波束形成的多目标测控

针对单站多目标同时测控中存在的问题,提出将数字波束形成技术应用于单站测控系统天线中,以更好实现对多目标的同时测控。针对多目标测控对天线系统的特殊要求,并结合数字波束形成技术自身的特点,分析了数字波束形成技术在实现全空域波束扫描、大型阵列波束形成和多目标跟踪时存在的3方面突出问题,并提出了解决的初步思路和方向。分析表明,采用数字波束形成技术的天线具有诸多优势,其在对多目标测控中具有广阔的发展前景。     

基于均匀圆阵的相干波束形成算法

提出了一种均匀圆阵相干波束形成方法，即模式空间矩阵重构（MODE—TOEP）波束形成算法.该算法对均匀圆形阵列（UCA）的输出信号进行模式空间转换，在此基础上重构一个Toeplitz矩阵，然后进行基于特征空间的波束形成，可以有效地抑制相干干扰．仿真表明，MODE-TOEP波束形成算法在小快拍数、小信噪比时有较好的性能，而且存在指向误差时有很强的稳健性．     

基于近场波束形成的麦克风阵列语音增强方法

当麦克风阵列用于封闭环境中非手持式语音拾取时,必须面对的一个问题是声场为阵列近场的问题。该文在子带自适应波束形成方法的基础上,引进了一种基于近场波束形成的麦克风阵列语音增强方法。该方法充分利用了近场球面波的波前弯曲率,有效地衰减了混响和噪声对期望信号的影响。仿真实验结果表明,在小房间混响条件下,基于近场波束形成的麦克风阵列语音增强方法取得了较好的噪声抑制效果。