Effect of pH on the Crystallization of Homogeneously Precipitated Nanosized PZT Powder

Nanosized lead zirconate titanate (PZT) powder with Zr:Ti ratio in the morphotropic phase boundary region was synthesized by homogeneous precipitation of metal ions. The powder precipitated at 90°C and at pH 6.7 resulted single-phase perovskite lead zirconate titanate powder when calcined at 550°C and above for 4 hours in air. The solution pH and the precipitation temperature strongly affect the composition of the calcined powder. The results obtained by structural characterization of homogeneously precipitated powder were compared with that obtained from the conventional precipitation method using ammonia in terms of crystallization, homogeneity, and microstructure. The homogeneously precipitated powder showed smaller particle size, minimum agglomeration and uniform shape on calcination and annealing. Powdered samples that precipitated by homogeneous precipitation crystallized directly to perovskite PZT, without any intermediate pyrochlore phase formation. In contrast, the NH₃ precipitated powder converted to perovskite PZT via metastable pyrochlore and it showed phase segregation upon annealing at higher temperatures. The reaction kinetics has been studied by X-ray diffraction, differential thermal analysis, and differential scanning calorimetry.     

Study on Adsorption Behavior of Rare Earth Complexes on Nanometer-Size Titanium Dioxide with ICP-AES

Inrecentyears ,rareearthelements (REEs)havebeenwidelyusedinfunctionalmaterials ,cata lystsandotherproductsinindustry ,diagnosisreagentsofmagneticresonanceimaging (MRI)inmedicineandsomefertilizersinagricultureespeciallyinChina .However,asaresultoftheirusage ,moreandmoreREEsaregettingintotheenvironment,andalsointohumanbodyviafoodchain[1,2 ] .Itisnotclearwhetherrareearthelementsareessentialforman ,soitisveryurgenttostudythebiologicaleffectofrareearthelementsinhumanhealthandenvironment .Inthes…     

活性炭吸附法脱除加氢催化柴油中的硫化物

采用5种活性炭对加氢催化柴油进行吸附脱硫,通过对活性炭的吸附效果及工艺参数的研究,探索了活性炭吸附脱硫最适宜的工艺条件。实验结果表明,分别选用比表面积为854.97,1 108.61 m2/g,相应微孔平均孔径为0.581 4,0.627 4 nm的活性炭,在粒度为40~80目,流速为0.25 mL/m in,吸附柱高径比为30/1的条件,可将不同原料油中有机硫含量分别从1 354.96,665.50μg/g降至360.40,69.61μg/g,脱硫率分别为73.40%和89.54%;在20~100℃时,随着温度的升高,活性炭吸附脱硫效果增强。     

喷气燃料脱色精制中颗粒白土失活加快的原因分析(Ⅱ)--喷气燃料馏分中有色成分的剖析及不同性质馏分油对白土脱色的影响

先用硅胶对大连石化分公司3号喷气燃料馏分油中的有色组分进行吸附,然后分别用二氯甲烷和甲醇两种脱附剂对已吸附有色组分的硅胶进行脱附,得到两种含有色组分的两种溶液.应用红外光谱和色-质联用分析法对富集的有色组分进行了分析鉴定.分析了不同时期喷气燃料馏分油的性质及其对颗粒白土吸附脱色性能的影响.结果表明,大连石化分公司3号喷气燃料馏分油中的有色组分主要成分为C8～C14醇类、酮类、苯酚、甲酚和多烷基酚类及一些多聚体化合物.脱硫醇塔前进料馏分油的性质差异很小,而脱硫醇塔后馏分油的性质变化很大,颜色显著加深.脱硫醇塔操作末期温度高而引起喷气燃料馏分中不稳定组分的氧化转化导致颜色变深.颗粒白土脱色处理赛氏色值高的喷气燃料馏分油明显比处理赛氏色值低的喷气燃料馏分油的效果要好.脱硫醇塔操作不当造成油品恶化是导致颗粒白土吸附脱色失活很快的主要原因.控制脱硫醇塔乃至蒸馏系统操作条件(特别是温度),对延长颗粒白土的使用时间至关重要.     

Copper(II) removal from aqueous solutions by fly ash

The removal of Cu(II) by adsorption on fly ash has been found to be concentration, pH and temperature dependent. The kinetics of adsorption indicates the process to be diffusion controlled. The Langmuir constants have been calculated at different temperatures, and the adsorption has been found to be endothermic (ΔH = 15.652 kcal mol^?1). The maximum removal is observed at pH 8.0, and variation in adsorption with pH has been explained on the basis of surface ionisation and complexation.     

Identification and modelling of aerobic hydrolysis – application of optimal experimental design

Hydrolysis mechanism plays a dominant role in the delicate balance of electron donor/electron acceptor ratios in BNR and EBPR systems as an important carbon source. In this study, the surface‐saturation‐type hydrolysis kinetics was investigated based on respirometric measurements, within the context of the theoretical and the practical identifiability of mathematical models. The identifiable parameters of a selected model were derived from respirograms. In addition, the information from the experiments was evaluated on the basis of Optimal Experimental Design (OED) methodology for different initial conditions of the batch respirometric experiment. © 2003 Society of Chemical Industry     

环己酮肟液相重排反应机理及动力学研究

研究了环己酮肟重排反应生成己内酰胺的机理及反应动力学方程。在建立用分光光度法测定环己酮肟浓度方法的基础上,实验研究了反应温度为20~45℃范围内的液相重排反应动力学。提出了此反应的化学反应动力学速率方程式: -r肟= k0exp (-E/RT)Ca肟Cb硫酸,其中环己酮肟反应级数a为2,硫酸反应级数b为1,活化能为-E/R = -19.86 kJmol-1, 频率因子k0为1.35×1027。通过实验研究证实了作为催化剂的硫酸参与重排反应的机理,认为重排反应过程中游离SO3不参与反应,仅作为水的吸收剂,此结论对环己酮肟液相重排反应的生产技术改造提供了有力依据,并在生产中得到了应用。     

Sorption of Acid Green 25 on chitosan: Influence of experimental parameters on uptake kinetics and sorption isotherms

Acid Green 25, which is a diazoic dye bearing two sulfonic groups, is efficiently sorbed on chitosan. The protonation of chitosan may explain the electrostatic attraction of this anionic dye and that its optimum pH is close to 3. Preliminary protonation of amine groups (obtained by contact with a sulfuric acid solution) reduced the variation of solution pH following sorbent addition but significantly reduced sorption performance: the maximum sorption capacity of raw chitosan, 525 mg dye/g (0.84 mmol dye/g), was halved by acidic preconditioning. The acidic conditioning also reduced the kinetic rate—the time necessary to reach equilibrium increased up to threefold depending on the experimental conditions. The size of sorbent particles influenced sorption kinetics and equilibrium because of resistance to intraparticle diffusion, but the sorption appeared to occur not only at the surface of the sorbent but also in the intraparticle network of the polymer. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1073–1080, 2003     

腐殖质对重金属离子的吸附作用

采用腐殖质对重金属离子进行了吸附试验。其结果表明 ,腐殖质对重金属离子具有强烈的吸附作用。腐殖质对Cu2 + 、Zn2 + 、Cd2 + 的吸附边界pH值分别为 4 2 ,5 8,7 2 ,吸附率可达 95 %以上 ;对Pb2 + 的吸附作用更加强烈 ,在pH值为 3 5时吸附率就达到 95 %以上 ,并且随着pH值的升高吸附率仍在 95 %以上。腐殖质对 4种重金属离子的吸附能力由强到弱的顺序是Pb2 + >Cu2 + >Zn2 + >Cd2 + 。腐殖质可以用来处理含重金属离子的污水 ,具有过滤快、沉降稳定、效果好的优点 ;也可作为土壤改良剂 ,有效地降低土壤中重金属的含量     

含两种不同共聚组分改性聚酯的结晶速率

添加己二酸、间苯二甲酸,聚乙二醇对PET进行改性,合成样品。用DSC法研究合成共聚物的等温结晶动力学。结果表明,在所选择的温度范围内,共聚物很好的符合Avrami方程。随温度的升高,共聚物的结晶速度常数K和Avrami指数n逐渐减小,结晶速度G逐渐降低。含2种柔性组分的共聚酯随着一种柔性组分含量的增加,结晶速率G上升;含一种刚性一种柔性组分的共聚酯随刚性组分含量的增加,结晶速率G下降。