铜基催化剂孔隙率对气体有效扩散系数的影响

研究了18种具有不同孔结构参数的粒状铜基甲醇合成催化剂孔隙率对有效扩散系数的影响。结果发现，催化剂微孔孔隙率增大，曲节因子亦增大，扩散阻力增加。将孔隙率与催化剂曲节因子关联，得到了半经验方程，用它可估算催化剂的曲节因子。     

单线复用技术在水文巡测设备中的应用

为了解决水文巡测设备中数据传输的可靠性，电力载波通讯中的单频阻波器技术被应用到巡测设备上。此法简单易行，稳定可靠。     

采用5V单电源供电的通信收发器LMS202E/LMS485及其应用

介绍了采用单5V电源工作的RS-232通信双收发器LMS202E和高速双向数据通信差分总线收发器LMS485的主要特性 ,给出了它们的典型应用电路。     

阀控式铅酸蓄电池的维护

对阀控式铅酸式蓄电池的维护工作进行了初步探讨。     

通用USB接口设备控制器的研究

简要介绍了USB技术的发展与现状；详细论述了USB系统的硬件结构；深入研究了USB系统的特点；探讨了USB系统目前仍在的问题。     

卸煤机走行部的技术改造

通过对卸煤机走行部的技术改造,提高了工作效率,节省了维修费用。     

高速数字光电耦合器HCPL-260L/060L及其应用

HCPL-260L/060L是美国安捷伦科技有限公司推出的高速数字光电耦合器。该器件的逻辑电平与LVTTL/LVCMOS兼容 ,并具有输出使能端。文中详细介绍了HCPL -260L/060L的引脚功能、内部结构、主要特点、使用要求和注意事项 ,给出了它与LVTTL器件的典型接口电路及隔离的3.3VRS232接口电路。     

生物非光滑耐磨表面与非光滑耐磨技术在工程中的应用

指出生物非光滑耐磨表面现象的普遍性，对贝壳、牙齿等几种天然生物耐磨表面几何形态特征进行了分析，并介绍了加工耐磨表面的几种技术方法及非光滑耐磨技术在工程中的应用。同时，对非光滑耐磨理论与技术方法中存在的问题及发展趋势进行了分析与展望。     

现场总线技术的特点及其在热电站的应用

阐述了现场总线技术的含义、主要特点和优点,对比了现场总线控制系统与DCS系统的区别,介绍了现场总线技术在洛阳石化分公司热电站的典型应用及其发展前景。     

Scaling laws and internal structure for characterizing electrospun poly[(R)-3-hydroxybutyrate] fibers

Using chloroform/dimethylformamide (CF/DMF) co-solvent, electrospinning of poly[(R)-3-hydroxybutyrate] (PHB) solutions was carried out at ambient temperature. The effects of the applied voltage (V), flow-rate (Q), and solution viscoelastic properties on the Taylor cone, electrified jet, and fiber morphology were investigated. In addition, the electric field developed by the needle-plate electrode configuration was calculated using a finite element analysis to reveal the tip-to-collector (H) effect. Among the processing parameters (V, Q and H), it was found that Q played a key role in determining the jet diameter (d_j) and electrospun fiber diameter (d_f), and scaling laws existed between them, i.e., d_j-Q^0.61 and d_f-Q^0.33. The diameter reduction ratios of D_o/d_j (D_o is the needle diameter) and d_j/d_f were measured as 50-120 and 5-10, respectively; it suggested that major jet stretching took place in the straight electrified jet region, and further chain orientation could be gained by the subsequent process of jet whipping. By changing PHB concentrations from 5 to 15 wt%, the solution viscosity (η_o) was increased from 100 to 4900 cP, whereas the surface tension and solution conductivity remained unchanged; it provided a good model solution to exclusively reveal the η_o effect on the electrospinning process. Our results showed that the η_o-dependence of d_j and d_f also followed simple scaling laws: d_j-η_o^0.06, and d_f-η_o^0.39, with a prefactor depending on the processing variables, mainly the flow-rate. Regardless of the PHB concentrations used, the obtained PHB fibers showed a similar crystallinity fraction of ca. 0.63 and possession of major α-crystals together with a small amount of β-crystals with zigzag chain conformation.