Effects of processing conditions on the curing of a vinyl ester resin

The effects of temperature, initiator, and accelerator levels on the curing of an epoxy bisphenol‐A vinyl ester resin Derakane® 411‐45 (formulated with styrene) were investigated by gel‐time and exotherm‐peak measurements on bulk samples. It was observed that the gel time was reduced as the initiator or accelerator ratio increased. Except at higher contents of the accelerator, a small kinetic plateau was seen in the gel curve and a shift of the maximum exotherm toward high temperatures in the DSC curves. This was explained by the dual role played by the accelerator species. A regression analysis of all gel‐time data showed a dependence of 3/2 order in the accelerator and first order in the initiator concentrations. Thus, for this polymerization initiation system, the gel time can be predicted for any initiator and cobalt levels and at any temperature within the ranges studied. The effect of the initiator on the unreacted styrene and vinyl ester was also examined. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1146–1154, 2002; DOI 10.1002/app.10403     

有机硅丙烯酸酯增深剂的制备及应用

由乙烯基三乙氧基硅烷与KH-550、丙烯酸酯类单体在阴/非离子表面活性剂存在下，通过乳液聚合制得带蓝光的半透明有机硅丙烯酸酯乳液．该乳液粘度小，有机硅质量分数15％，总固体质量分数30％，该增深剂既可单独使用，也可与氨基硅油乳液复配，经蓝色16电力纺、黑色03双绉等真丝产品增深，其增深度可达15％，但亲水性有所下降．     

绿色润滑剂的生物降解性及特点

阐述了绿色友好润滑剂的生物降解性和摩擦化学特点，提出了绿色润滑剂在发展过程中存在的主要问题，并对未来的发展趋势进行了预测。     

丙烯酸酯类助剂ACR的生产简况及市场分析

概述了ACR的功能、生产简况及市场趋势。     

Mn/Ti-Zr复合氧化物催化苯甲酸甲酯选择性加氢

以硝酸锆和钛酸四丁酯为原料,采用共沉淀法制备Ti-Zr-O氧化物载体,采用浸渍法制备了Mn/Ti-Zr催化剂;采用XRD、N2物理吸附、H2-TPR、NH3-TPD和TG-DTA对Mn/Ti-Zr催化剂进行了表征,并考察了催化剂组成、结构和反应条件对苯甲酸甲酯（MB）加氢性能的影响,以及催化剂的长周期稳定性、失活和再生行为。结果表明：TiO2含量和Mn负载量分别为12% 和8% （二者均以Ti-Zr-O氧化物的质量为基准,下同）时制备的Mn/Ti-Zr催化剂性能最优,该催化剂在θ = 390 ℃, p = 1.0 MPa,n(H2)∶n(MB) = 9∶1和重时空速（WHSV）= 0.5 h-1的优化条件能够实现98.0% 的苯甲酸甲酯转化率和89.7%的苯甲醛和苯甲醇选择性;苯甲酸甲酯加氢反应的活性和选择性分别与Mn/Ti-Zr表面MnOx物种的氧化还原性和催化剂的酸性密切相关。此外,Mn/Ti-Zr催化剂具有良好的结构稳定性,在反应1000 h后仅因积碳而丧失11% 的活性,且轻微失活的催化剂可以通过焙烧恢复其初始活性和选择性。     

聚甘油脂肪酸酯类乳化剂制备乳液功效性研究

测定了聚甘油-6 二硬脂酸酯、聚甘油-10 硬脂酸酯、聚甘油-10二棕榈酸酯制备的乳液的粒径、皮肤水分含量、经皮水分流失TEWL。结果表明,聚甘油-6 二硬脂酸酯制备的乳液分散性较好,乳液粒径分布较小;聚甘油-10二棕榈酸酯制备的乳液在皮肤水分含量、经皮水分流失TEWL值上优于其他2组。     

乙酸苄酯的合成及应用进展

评述了采用硫酸高铈馈、固体超强酸、可膨胀石墨、活性炭固载氯化铁和分子筛负载固体酸催化下的微波辐射技术、漆酚镨聚合物等催化合成乙酸苄酯的方法。认为固体超强酸具有工业化优势。     

The Structure of the Irreversibly Bound Adhesion Promoter-Substrate Interfacial Layer of γ-Aminopropylsilanetriol on Crystalline Si, as Measured by XPS and FTIR

The irreversibly bound interfacial layer deposited by the γ-aminopropysilanetriol adhesion promoter onto a crystalline silicon substrate, which remains even after profuse washing, was found by XPS to have resulted from the fragmentation and rearrangement of the original γ-aminopropylsilanetriol molecule. A mechanism is proposed, involving the homolytic scission of the terminal N-C bond. One of the subsequent reactions is believed to involve hydrogen loss by abstraction and the formation of a terminal vinyl group, which bonds to the substrate. Support for this mechanism is found in IR spectroscopy of this layer.     

Solvent-free oxidation of benzyl alcohol with oxygen using zeolite-supported Au and Au–Pd catalysts

The oxidation of benzyl alcohol to benzaldehyde has been investigated in the absence of solvent using zeolite-supported Au and Au–Pd catalysts. Three zeolites were investigated, ZSM-5, zeolite β and zeolite Y, and these were contrasted with the titanoslicalite TS-1 and TiO₂ as supports. For the Au catalysts the best results are obtained with zeolite β as the support and the conversions were comparable or better than those observed with TiO₂ in terms of turn over frequencies. However, the selectivities observed with the acidic zeolites were lower than the non-acidic TS-1 and TiO₂. This is due to the subsequent reaction of benzaldehyde via acid catalysed reactions to give benzyl benzoate and its dibenzyl acetal, and, in some cases dibenzylether. Initial catalysts were evaluated with a gold loading of 2 wt% and increasing this to 4 wt% showed the expected increase in activity, indicating that there is scope to improve the performance of these catalysts. The most active catalysts were prepared by impregnation and catalysts prepared by deposition precipitation were considerably less active. Introduction of Pd into the catalyst improved the activity without significantly affecting the selectivity.     

微波诱导稀土复合固体超强酸SO4^2-／ZrO2-Nd2O3催化合成乙酸苄酯

以新型稀土复合固体超强酸为催化剂，在微波辐射下苯甲醇和乙酸反应合成了乙酸苄酯，探索反应各因素对酯化率的影响。实验结果表明：SO4^2-／ZrO2-Nd2O3具有较高的催化活性。最佳反应条件为：醇酸摩尔比2．0（乙酸用量为0．2mol前提下），催化剂用量为1．8g，带水剂环己烷12mL，微波辐射功率550W，辐射时间25min，酯化率可达96．3％。该催化剂易于回收且可重复使用，具有良好的活性稳定性。