Helmert方差分量估计在GPS/GLONASS/BDS组合定位权比确定中的应用

因GNSS系统间观测噪声、轨道精度的差异,采用经验权比进行组合定位难以得到最优结果。基于此,在GPS/GLONASS/BDS组合定位中引入Helmert方差分量估计,对GPS/GLONASS/BDS组合单点定位和基线解算中各系统观测值进行合理定权。实验表明,采用该方法确定的伪距观测值最佳权比为5∶1∶1,相位观测值最佳权比为1∶1∶1,有效提高了GPS/GLONASS/BDS组合定位的精度和可靠性。     

Study of Partial Coefficients for Design of Semicircular Breakwaters

In the present study,the reliability design of semicircular breakwater is based on the verification of the rules defined by standard specifications,where partial coefficients are introduced to ensure safety.The reliability of the semicircular breakwaters has been analyzed by using the Hasofer-Lind method to determine the reliability index of structure that has correlated loads,utilizing the long-term observed wave data at a given place.The relation curve between reliability index and safety factor in the traditional design method,as well as the relationships between reliability index and partial coefficients,have been obtained.This paper proposes values of partial coefficients for the design expression of semicircular breakwaters in the cases of anti-sliding and anti-overturning.     

Minimal cut-based recursive decomposition algorithm for seismic reliability evaluation of lifeline networks

In this paper, a new probabilistic analytical approach, the minimal cut-based recursive decomposition algorithm (MCRDA), is presented to evaluate the seismic reliability of large-scale lifeline systems. Based on the minimal cut searching algorithm, the approach calculates the disjoint minimal cuts one by one using the basic procedure of the recursive decomposition method. At the same time, the process obtains the disjoint minimal paths of the system. In order to improve the computation efficiency, probabilistic inequality is used to calculate a solution that satisfies the prescribed error bound. A series of case studies show that MCRDA converges rapidly when the edges of the systems have low reliabilities. Therefore, the approach can be used to evaluate large-scale lifeline systems subjected to strong seismic wave excitation.     

Application of saddlepoint approximation in reliability analysis of dynamic systems

The application of the saddlepoint approximation to reliability analysis of dynamic systems is investigated. The failure event in reliability problems is formulated as the exceedance of a single performance variable over a prescribed threshold level. The saddlepoint approximation technique provides a choice to estimate the cumulative distribution function (CDF) of the performance variable. The failure probability is obtained as the value of the complement CDF at a specif ied threshold. The method requires computing the saddlepoint from a simple algebraic equation that depends on the cumulant generating function (CGF) of the performance variable. A method for calculating the saddlepoint using random samples of the performance variable is presented. The applicable region of the saddlepoint approximation is discussed in detail. A 10-story shear building model with white noise excitation illustrates the accuracy and effi ciency of the proposed methodology.     

Effect of connecting rain barrels on the storage size reduction

In this article, the possibility of sharing rain barrels and the potential benefit of reducing storage size through physical and non‐physical connections of rain barrels in a community are investigated. Using the concepts of homogeneous/heterogeneous users in rainwater harvesting systems (RWHS), two simple cases of a community composed of four prospective users are examined. The first is performed with the users who have the same mean and variance in water demands (homogeneous users), and the second is with the users with different means and variances (heterogeneous users). To take account for the rainfall characteristics in different places, historical records from six cities in the USA are used for storage–reliability–yield analysis. The result indicates that required total storage can be reduced by connecting multiple rain barrels. In addition, a significant difference is found between homogeneous and heterogeneous user groups. Homogeneous users do not achieve a substantial benefit from connecting their rain barrels; these users may even be disadvantaged by sharing. In contrast, heterogeneous users receive benefit by reducing the total required storage. Most benefit is expected between users with maximum difference in mean water demands. The reduction in storage size was as considerable as 37% in this study. The quantity of storage reduction depends on locations and target reliabilities. Knowledge of the benefits and limitations of rain barrel connections can improve RWHS performance through ability to customize a network plan for individual users. Copyright © 2011 John Wiley & Sons, Ltd.     

输水管网模糊地震可靠性的 Monte Carlo 法分析程序

本文详细介绍了笔者所建议的运用模糊图理论和方法进行城市输水管网的地震可靠性分析途径和计算程序。对于输水管网中每段管道的震害预测,建立了相应的专家系统。在此基础上,定义了管网系统的模糊可靠性,更好地反映了人们对于管道损坏状态估计的模糊性和对可靠性要求上的模糊性。以模糊矩阵来描述输水管网的状态是十分方便的。通过计算模糊矩阵的传递闭包,极易找出最短路、关键段等。由于地震作用和管道抗震能力都是随机的,因此整个管网系统的可靠性分析是藉助Monle Carlo法进行的。以Monle Carlo法对模糊图进行分析,从而得到管网的地震可靠性,这还是首次。用PASCAL和PROLOG编制了在微机上实用的计算机程序,特别是以智能语言PROLOG编制的程序,更有许多特色。由于采用了一些技巧,使在微机上可以分析相当大的系统,为城市抗震防灾工作提供了一个有力的工具。     

The System Analysis and Reliability Evaluation of Rock Slopes

The principal of preferred plane analysis is a new research view and model of rock slope engineering geology. It advocates that the rock slope stability, boundary conditions and failure model are controlled by preferred planes. Therefore, the problem of slope stability evaluation can be converted into the search for preferred planes and determination of preferred separating bodies. The organic combination of the deterministic model and the indeterministic model can be realized by applying the systems engineering principle and the research model and method of reliability analysis in the quantitative evaluation and prediction of rock slope stability. Finally, the paper presents the case studies of slopes of the Yangtze Gorge Project and the Ma'anshan openpit mine.     

Assessment of reliability in water distribution networks using entropy based measures

Entropy based expressions for measurement of reliability and redundancy have recently been reported. These measures approach assessment of the reliability of the distribution network from the intrinsic redundancy of the network layout. The paper extends earlier work on entropy functions by including a more explicit statement of the alternate paths available in the network and by recognizing that under certain circumstances, e.g., failure of some part of the network work, an outflow link from a node under normal working condition may become an inflow link to the same node. The measures are assessed by comparison with parameters measuring Nodal Pair Reliability and percentage of flow supplied at adequate pressure for a range of networks and link failure conditions in this networks. The entropy measures are shown to reflect changes in the network reliability, as measured by these two comparative parameters, very well.     

Cost-effective network design for groundwater flow monitoring

The extensive use of groundwater resources has increased the need for developing cost-effective monitoring networks to provide an indication of the degree to which the subsurface environment has been affected by human activities. This study presents a cost-effective approach to the design of groundwater flow monitoring networks. The groundwater network design is formulated with two problem formats: maximizing the statistical monitoring power for specified budget constraint and minimizing monitoring cost for statistical power requirement. The statistical monitoring power constraint is introduced with an information reliability threshold value. A branch and bound technique is employed to select the optimal solution from a discrete set of possible network alternatives. The method is tested to the design of groundwater flow monitoring problem in the Pomona County, California.     

Time-dependent behaviour of the rock mass

Summary The strength of intact rock and the rock mass is time-dependent. For intact rock experimental verification is available, for the rock mass the scale of time-dependence is a matter of judgement. Rock mass classifications do however emphasize the effect of time on tunnel stability. This paper examines the source of time-dependence in rocks and the rock mass and suggests a technique for estimating the long term strength. The long term strength of the rock mass is controlled by the time-dependent weakening of intact rock. Frictional resistance, a major source of rock mass strength, increases rather than decreases with time. Lifetime estimation for rocks can be accomplished phenomenologically or mechanistically. The first is a statistical process of wide applicability, the second is more restrictive in usage as its applies only to materials that suffer time-dependent strain (creep). Although the mechanistic route is more appealing, it has a major drawback as it concentrates on steady state creep. There is no strong evidence for steady state creep in rocks. The technique for long term prediction is developed through the analysis of the failure rate under constant load. The failure rate for a given load and environment is established from the frequency distribution of time-to-failure data as measured in static fatigue tests. As expected, the failure rate is strongly affected by both the loading and the environmental condition. The influence, however, is systematic and predictable.