四川汶川地震断裂带科学钻探2号孔（WFSD-2）岩性特征和断裂带的结构

以WFSD-2钻孔岩心为研究对象,通过详细的岩心编录和岩石学、构造地质学等研究,识别出该钻孔岩心具有6段岩性,从上向下依次为彭灌杂岩（0-599.31m）、三叠系须家河组二段（599.31-1211.49m）、彭灌杂岩（1211.49-1679.51m）、三叠系须家河组三段（1679.51-1715.48m）、彭灌杂岩（1715.48-2081.47m）、三叠系须家河组四段（2081.47-2283.56m）。彭灌杂岩主要以花岗岩和火山岩为主,三叠系须家河组沉积岩以砂岩、粉砂岩、泥岩、页岩、煤层（线）和砾岩为主。3套彭灌杂岩与三叠系须家河组沉积岩重复出现,时代较老的岩性段逆冲覆盖在新的地层之上,表明龙门山构造带由一系列逆冲岩片叠置而成。岩心中断裂岩较为发育,主要为断层角砾岩、碎裂岩和断层泥,反映出脆性变形作用的特点。通过对断裂岩的统计分析,厘定了20余条产状不同、规模不等的次级断裂带,断裂带宽度和断裂密度峰值显示FZ600、FZ720、FZ782、FZ817、FZ922、FZ951、FZ1449、FZ1681、FZ2082为主要断裂带,其中FZ1681系规模最大的一条断裂。依据断裂岩的组合特征可以将岩心中断裂带的结构以断层泥为核部划分为两大类：对称型断裂带和不对称型断裂带。根据地表破裂带、WFSD-1钻孔岩心中主滑移带位置的几何关系、岩性分层等因素,可推断汶川地震主滑移带应位于FZ1134、FZ1449或FZ1681之中,同时也暗示该地区经常发生类似汶川地震的大地震活动。研究表明,龙门山地区经历了强烈的构造缩短和快速隆升作用,暗示龙门山地区构造活动非常强烈。     

四川龙门山安县-灌县断裂带的特征——以汶川地震断裂带科学钻探3号孔（WFSD-3）岩心为例

汶川地震断裂带科学钻探（WFSD）是由科技部、国土资源部和中国地震局联合组织实施的汶川地震断裂带科学钻探研究项目,计划在同震地表破裂带（龙门山映秀-北川断裂和安县-灌县断裂）的上盘布置5口科学群钻：WFSD-1、WFSD-2、WFSD-3、WFSD-3P和WFSD-4,其中WFSD-3和WFSD-3P位于龙门山前山断裂安县-灌县断裂的上盘。以WFSD-3钻孔岩心为研究对象,进行详细的岩石学、构造学、野外编录等研究。WFSD-3钻孔岩心中的断裂岩主要由断层角砾岩、碎裂岩和断层泥组成,未见假玄武玻璃。钻孔中存在26条规模不等的断裂带,断裂密度显示FZ634、FZ1215和FZ1250为主要断裂带,而FZ1250可能为2008年汶川地震的主滑移带。安县-灌县断裂在地表和WFSD-3P、WFSD-3钻孔岩心中的断层倾角分别约为60°、46°和38°,显示安县-灌县断裂倾角从地表至深部逐渐变缓,为一铲式逆冲断层。     

DN630供水管道定向钻穿越淮河工程的设计和施工

作为非开挖施工的一个分支,定向钻穿越技术得到了越来越广泛的应用。本文以DN630供水管道定向钻穿越淮河工程为例,介绍了定向钻穿越的技术特点,指出了设计基本原则及设计要素如管道钻进的入土角、出土角、曲率半径和穿越深度等确定方法,并阐述了定向钻穿越施工工艺流程及泥浆配制、钻导向孔、扩孔及管道回拖等主要施工工艺。     

注浆技术在砂卵石地层水平（定）导向钻进工程中的应用研究

本人在借鉴前人成果并结合施工经验的基础上,系统总结了砂卵石地层与非开挖钻进施工的适应性,对非开挖钻进施工中出现的问题进行了归纳和分类,并对其原因进行了分析和探讨。同时,为了解决非开挖导向钻进在复杂地层特别是砂卵石层中的施工难题,考虑采用注浆预加固技术对砂卵石层进行预先加固,以提高其强度,保证非开挖导向钻进的顺利进行。更进一步地,对水平孔中注浆预加固的三种方法（垂直注浆法、导管注浆法、随钻注浆法）在导向钻进工程中的概念、适用范围、优缺点以及实施控制要点等进行了对比和研究。     

Microfacies and diagenesis of older Pleistocene (pre‐last glacial maximum) reef deposits,Great Barrier Reef,Australia (IODP Expedition 325): A quantitative approach

During Integrated Ocean Drilling Program Expedition 325, 34 holes were drilled along five transects in front of the Great Barrier Reef of Australia, penetrating some 700 m of late Pleistocene reef deposits (post‐glacial; largely 20 to 10 kyr bp ) in water depths of 42 to 127 m. In seven holes, drilled in water depths of 42 to 92 m on three transects, older Pleistocene (older than last glacial maximum, >20 kyr bp ) reef deposits were recovered from lower core sections. In this study, facies, diagenetic features, mineralogy and stable isotope geochemistry of 100 samples from six of the latter holes were investigated and quantified. Lithologies are dominated by grain‐supported textures, and were to a large part deposited in high‐energy, reef or reef slope environments. Quantitative analyses allow 11 microfacies to be defined, including mixed skeletal packstone and grainstone, mudstone‐wackestone, coral packstone, coral grainstone, coralline algal grainstone, coral‐algal packstone, coralline algal packstone, Halimeda grainstone, microbialite and caliche. Microbialites, that are common in cavities of younger, post‐glacial deposits, are rare in pre‐last glacial maximum core sections, possibly due to a lack of open framework suitable for colonization by microbes. In pre‐last glacial maximum deposits of holes M0032A and M0033A (>20 kyr bp ), marine diagenetic features are dominant; samples consist largely of aragonite and high‐magnesium calcite. Holes M0042A and M0057A, which contain the oldest rocks (>169 kyr bp ), are characterized by meteoric diagenesis and samples mostly consist of low‐magnesium calcite. Holes M0042A, M0055A and M0056A (>30 kyr bp ), and a horizon in the upper part of hole M0057A, contain both marine and meteoric diagenetic features. However, only one change from marine to meteoric pore water is recorded in contrast with the changes in diagenetic environment that might be inferred from the sea‐level history. Values of stable isotopes of oxygen and carbon are consistent with these findings. Samples from holes M0032A and M0033A reflect largely positive values (δ¹⁸O: ?1 to +1‰ and δ¹³C: +1 to +4‰), whereas those from holes M0042A and M0057A are negative (δ¹⁸O: ?4 to +2‰ and δ¹³C: ?8 to +2‰). Holes M0055A and M0056A provide intermediate values, with slightly positive δ¹³C, and negative δ¹⁸O values. The type and intensity of meteroric diagenesis appears to have been controlled both by age and depth, i.e. the time available for diagenetic alteration, and reflects the relation between reef deposition and sea‐level change.     

中国大陆科学钻探主孔自然放射性测井及其解释

为了认识江苏东海超高压变质带上地壳岩石自然放射性的垂向分布特征, 榴辉岩退变质程度对放射性元素浓度的影响, 以及放射性产热率对地温梯度的影响, 利用中国大陆科学钻探(CCSD) 主孔100~5000m自然放射性测井(自然伽马和自然伽马能谱) 资料统计了CCSD主孔各类岩石的自然放射性强度和铀、钍、钾元素的浓度, 计算出产热率曲线.自然伽马, 铀、钍、钾浓度和产热率从蛇纹岩到榴辉岩、角闪岩、副片麻岩、正片麻岩依次增大.随着榴辉岩退变质程度的增强, 其铀、钍、钾元素的浓度值逐渐增大.CCSD主孔自然放射性的垂向分布特征主要受岩性控制, 自然放射性随深度增加有增强趋势.产热率与自然伽马测井值之间有很好的线性关系, 在高放射性岩层的上部, 地温梯度会出现较强扰动和低值异常.      

Environmental decision-making under uncertainty using intuitionistic fuzzy analytic hierarchy process (IF-AHP)

Analytic hierarchy process (AHP) is a utility theory based decision-making technique, which works on a premise that the decision-making of complex problems can be handled by structuring them into simple and comprehensible hierarchical structures. However, AHP involves human subjective evaluation, which introduces vagueness that necessitates the use of decision-making under uncertainty. The vagueness is commonly handled through fuzzy sets theory, by assigning degree of membership. But, the environmental decision-making problem becomes more involved if there is an uncertainty in assigning the membership function (or degree of belief) to fuzzy pairwise comparisons, which is referred to as ambiguity (non-specificity). In this paper, the concept of intuitionistic fuzzy set is applied to AHP, called IF-AHP to handle both vagueness and ambiguity related uncertainties in the environmental decision-making process. The proposed IF-AHP methodology is demonstrated with an illustrative example to select best drilling fluid (mud) for drilling operations under multiple environmental criteria.     

发窝构造油气潜力评价

云龙凹陷地处楚雄盆地东部浅坳陷区,面积１４６４ｋｍ＾２,由于具有良好的石油地质条件而被各方所瞩目。发窝构造位于云龙凹陷中部断弯构造带,南高点为断背斜,北高点为断鼻,云参１井位于云龙凹陷发窝构造南高点,从区域石油地质条件入手,结合地震勘探成果,含油气性剖面研究、区带评价及圈闭评价资料,论述了发窝构造的油气潜力,对云参１井钻探的可行性进行分析研究,肯定了钻探的可行性及必要性,也对钻探的风险进行分析。     

苏鲁超高压变质岩中地震波速随围压的变化规律

我们在10~800MPa的静水压力下测量了中国大陆科学钻探(CCSD)主孔岩心和采自苏鲁地区地表露头上的共68块典型超高压变质岩试样的地震波速,并建立了波速和围压的定量关系,成功地解释了描述这一定量关系方程中4个参数的物理意义。笔者相信,本文将为超高压变质岩地区以及新老俯冲带地震波资料的解释提供必不可少的理论和实验支撑。     

磁化率和密度对中国大陆科学钻探主孔100～2000 m岩石类型的判别

为查明磁化率和密度对于中国大陆科学钻探工程(CCSD)主孔100~2000m岩性的响应和判别特征,利用SPSS10.0统计分析软件进行了判别分析.研究结果显示,岩石的密度和体积磁化率主要受岩性的控制.采用迫入法建立全模型,对CCSD主孔100~2000m井段岩心的岩性判别率达84.8%.其中,蛇纹石化橄榄岩、正片麻岩、副片麻岩、榴辉岩、角闪岩和退变质榴辉岩的判别率分别为100%、87.1%、89.7%、89.6%、96.7%和63.7%.该研究表明,密度和磁化率可以为超高压变质岩石的岩性鉴别和区分提供定量约束,有利于地球物理探测成果和测井资料的准确解析.同时,本文也是SPSS统计分析软件在超高压变质岩石类型判别方面的一个应用实例,对于其他岩石类型的判别分析具有借鉴意义.