科尔沁沙地土地利用与耕作方式对土壤风蚀的影响

土壤风蚀造成的直接生态后果是土地资源的退化。在春播前两次沙尘暴事件中,对科尔沁沙地几种具有代表性的土地类型的土壤风蚀量及土壤特性进行了野外测定、分析,结果表明:(1)在同一沙尘暴天气下,由于土地利用和耕作方式的不同,土壤风蚀量存在着差异,新垦农地和翻耕农地的风蚀量显著高于未垦草地、免耕农地和麻黄地;免耕农地则与未垦草地的风蚀量相差不大,风蚀危害较轻;麻黄地几乎不受风蚀侵害。新垦农地、翻耕农地、免耕农地、未垦草地、麻黄地两次观测的土壤风蚀量平均值依次为24.59、15.60、2.26、1.46和0.22 g/h.cm2。(2)基于土壤特性计算的土壤退化指数结果表明,新垦农地和翻耕农地发生了较为严重的退化。     

Initiation and development of pull-apart basins with Riedel shear mechanism: insights from scaled clay experiments

Typical pull-apart structures were created in scaled clay experiments with a pure strike-slip geometry (Riedel type experiments). A clay slab represents the sedimentary cover above a strike-slip fault in the rigid basement. At an early stage of the development of the deformation zone, synthetic shear fractures (Riedel shears) within the clay slab display dilatational behaviour. With increasing basal displacement the Riedel shears rotate and open further, developing into long, narrow and deep troughs. The shear displacement and the low angle with the prescribed principal basal fault set them apart from tension gashes. At a more evolved stage, synthetic segments (Y-shears) parallel to the basal principal fault develop and accommodate progressive strike-slip deformation. The Y-shears connect the tips of adjacent troughs developed from the earlier Riedel shears, resulting in the typical rhomb-shaped structures characteristic for pull-apart basins. The Strait of Sicily rift zone, with major strike-slip systems being active from the Miocene to the Present, comprises pull-apart basins at different length scales, for which the structural record suggests development by a mechanism similar to that observed in our experiments.     

Evaluation of three waterborne polymers as stabilizers for sandy soil

This study reports on waterborne polymer emulsion systems that were used for structural modification of sandy soils. The first emulsion used was a styrene-acrylic, copolymer emulsion; the second and third were vinyl-acrylic, copolymer-based emulsions. Specimens were prepared by adding different polymer emulsions to the sand and water in prescribed amounts. The performance of the different emulsion systems as sand stabilizers was estimated through measurement of the hydraulic conductivity and compressive strength. Measurements of hydraulic conductivity were conducted in a flexible membrane test apparatus. The hydraulic conductivity for the three emulsions decreased at different rates, with an increase in polymer content up to 3 wt. (i.e., % by weight). Additional increase of polymer content did not introduce significant decrease in hydraulic conductivity, and, at 5 wt.%, the three emulsions had essentially the same effect. Measurements made on dry cylindrical specimens disclosed remarkable enhancement in the mechanical behavior of the system. The compressive strength and modulus of elasticity of the examined emulsions increased with a higher concentration of polymer. Scanning electron microscope (SEM) revealed that the reduction in the permeability and the improved mechanical properties can be attributed to three dominant structural changes: the development of interconnecting ties between the sand particles, the development of adhesion between neighboring sand particles in contact, and the covering of the sand particles with a thin polymer film.     

Fission track evidence for the Mesozoic Cenozoic tectonic uplift of Mt. Bogda, Xinjiang, Northwest China

1 IntroductionThe Mesozoic-Cenozoic tectonic evolution and ki-netics mechanism of the intracontinental orogen are thekey subjects of continental dynamics (Ma Zongjin andGao Xianglin, 2004) and the key to understanding theregional geological tectonics (Qia…     

鄱阳盆地构造—沉积特征及其演化史

 鄱阳盆地是发育在江南—九岭和怀玉—官帽基底拆离造山带上的白垩-古近纪张扭性断陷盆地,明显受近南北走向的赣江走滑断裂系和前白垩系逆冲断裂系晚期反转的双重因素控制,呈“两坳夹一隆”的区域构造格局。受赣江、进贤—石门街走滑断裂夹持的南昌凹陷,呈近南北向凹凸相间展布格局。进贤—石门街走滑断裂以东地区,“南断北超”型断陷自南而北由北东走向渐转为北北东向展布,其源于晚印支-燕山期北东向逆冲断裂在晚期的反转作用,西缘和北部受赣江断裂系东枝走滑断裂影响明显而发生转向。鄱阳盆地经历了早白垩世晚期(冷水坞组沉积期)拉分盆地、晚白垩世早-中期(周家店组—南雄组沉积早期)走滑张扭断(坳)陷盆地、晚白垩世晚期(南雄组沉积中-晚期)走滑伸展盆地和古近纪坳陷盆地等演化阶段,东南部断陷区(江埠—二甲村凹陷)由于喜马拉雅期的隆升剥蚀而只残存周家店组早期坳陷和周家店组中期—南雄组中期断陷两个发育阶段的沉积。     

福建省滨海火电厂地质灾害问题及风险控制探讨

滨海火力发电厂工程主要包括厂区建筑、码头、管道、取排水、填海和贮灰场等工程。其主要面临着福建省海岸带构造运动、断裂及地震活动、港湾淤积、海底滑坡、软土地基、海底活动地貌、基岩不均匀风化以及人类工程活动等主要的灾害性地质因素。通过对这些因素潜在的致灾特点分析，提出了滨海火电厂地质灾害风险控制应包括选址阶段地质灾害风险回避、设计施工阶段地质灾害风险处理及运行阶段地质灾害风险监控等3方面。地质灾害风险评估是滨海火电厂地质灾害风险控制的首要任务。针对滨海电厂工程的特点，评估内容应着重于地质灾害危险性评估及易损性评估。选址阶段地质灾害风险回避主要是对构造不稳定的回避。地质灾害风险处理主要是电厂工程的基础处理及管道抗冲刷处理。电厂运行阶段地质灾害风险监控主要是对建筑物基础稳定性及海域冲淤变化的监控。     

中国大陆科学钻探（CCSD）主孔地区岩石圈热结构

岩石圈热结构是指地球内部热量在壳幔的配分比例、温度以及热导率和生热率等热学参数在岩石圈中的分布特征。岩石圈的热结构直接影响着岩石的物理性质和流变学性质,同时还控制了化学反应的类型和速度,从而制约着岩石圈的发展和演化。本文在前人CCSD主孔岩石主、微量元素研究基础上,利用Rybach生热率公式计算了钻孔岩石的放射性生热率,并结合岩石热导率的测定研究了CCSD主孔100-2000m岩石的热结构和主孔榴辉岩在不同退变质程度下生热率、热导率的变化:钻孔中岩石的平均生热率为0.95μWm-3,平均热导率为2.96mWm-1K-1。,其中片麻岩生热率高迭1.01-1.7μWm-3,热导率为2.76-2.96mWm-1K-1;基性超基性岩石生热率最低(<0.21μWm-3),热导率则高达3.20mWm-1K-1以上;新鲜榴辉岩生热率、热导率居中,分剐为0.16-0.44μWm-3和3.31-3.85mWm-1K-1。钻孔中榴辉岩生热率、热导率变化主要受岩性控制:从新鲜榴辉岩到完全退变榴辉岩,热导率总体上降低,但从强退变榴辉岩到完全退变榴辉岩,岩石热导率升高;而在此过程中岩石生热率总体上升高,仅当从中等退变质榴辉岩退变为强退变质榴辉岩时,岩石生热率出现降低趋势。在综合研究的基础上预测CCSD主孔5000m深度处温度为139℃,温度范围为131-151℃。根据区域深部地球物理探测成果对CCSD主孔地区岩石圈热结构进行了研究:上地壳底部温度为256℃,中地壳底部温度为492℃,Moho面温度为683℃,岩石圈底部温度为1185℃,来自地幔的热流为44.1mWm-2,对地表热流的贡献率为58%。研究结果表明,由岩石物理方法获得的CCSD主孔地区岩石圈地温曲线与石榴石-二辉橄榄岩包体推断的中国东部地温曲线十分吻合,本文从实验岩石物理学角度为CCSD主孔地区岩石圈热结构研究提供了重要约束     

基于小波统计特性的遥感图像像素与特征联合最优融合方法

遥感影像的IHS融合方法由于匹配误差导致光谱畸变和退化,而小波变换在变换域具有良好的分频特性,小波系数的统计特性反映了遥感影像的边缘、线和区域等显著特征。提出了基于小波统计特性的遥感影像的像素和特征联合最优融合方法,在IHS空间,对强度分量I的高频部分利用多分辨率小波融合方法进行影像的高频细节特征融合,低频部分选取光谱信息和空间分辨率评价指标作为融合权系数求优指标,进行像素级最优融合,实验结果证明了该方法的有效性。