降雨条件下岩土饱和-非饱和渗流分析

基于Buckley-Leverett两相渗流方程,提出了新的岩土饱和-非饱和渗流数学模型,利用有限差分方法给出了隐式压力显示饱和度数值求解方法,编制了饱和-非饱和渗流计算程序.结合工程实例,模拟了降雨入渗条件下边坡岩体渗流场孔隙压力变化和含水饱和度变化,模拟结果验证了所提出的模型对饱和-非饱和渗流的有效性.     

Impact of a Tropical Cyclone on Coastal Upwelling Processes

A three-dimensional numerical model is described to study theresponse of a coastal ocean excited by a tropical cyclone in the Bay of Bengal. The numericalexperiments have been carried out using the model to understand the dynamics and thermodynamics ofthe ocean due to different cyclonic systems approaching in different directions. In the firstexperiment, the model is used to simulate the vertical thermal structure of the ocean as a response ofpassage of the less intensified 1997 cyclone, which was skirting the east coast of India before crossingthe Bangladesh coast. The simulations are compared with the buoy data available during the storm period.In the next experiment, it is considered an idealized cyclone with hurricane winds movingnormal to the east coast of India crossing between Visakhapatnam and Kakinada to evolve thermalstructure and currents of the ocean. A net decrease of the SST of 6–7 °C is simulated whenthe severe cyclonic storm moved over the coastal ocean.     

Indicator Simulation Accounting for Multiple-Point Statistics

Geostatistical simulation aims at reproducing the variability of the real underlying phenomena. When nonlinear features or large-range connectivity is present, the traditional variogram-based simulation approaches do not provide good reproduction of those features. Connectivity of high and low values is often critical for grades in a mineral deposit. Multiple-point statistics can help to characterize these features. The use of multiple-point statistics in geostatistical simulation was proposed more than 10 years ago, on the basis of the use of training images to extract the statistics. This paper proposes the use of multiple-point statistics extracted from actual data. A method is developed to simulate continuous variables. The indicator kriging probabilities used in sequential indicator simulation are modified by probabilities extracted from multiple-point configurations. The correction is done under the assumption of conditional independence. The practical implementation of the method is illustrated with data from a porphyry copper mine.     

Transformation of Residuals to Avoid Artifacts in Geostatistical Modelling with a Trend

Trend modelling is an important part of natural resource characterization. A common approach to account for a variable with a trend is to decompose it into a relatively smoothly varying trend and a more variable residual component. Then, the residuals are stochastically modelled independent of the trend. This decomposition can result in values outside the plausible range of variability, such as grades below zero or ratios that exceed 1.0. We transform the residuals conditional to the trend component to explicitly remove these complex features prior to geostatistical modelling. Back transformation of the modelled residual values allows the complex relations to be reproduced. A petroleum-related application shows the robustness of the proposed transformation. Furthermore, a mining application shows that when this conditional transformation is applied to the original variable, instead of the residual, simulated values are assured to be nonnegative.     

Effects of spatially structured vegetation patterns on hillslope erosion in a semiarid Mediterranean environment: a simulation study

A general trend of decreasing soil loss rates with increasing vegetation cover fraction is widely accepted. Field observations and experimental work, however, show that the form of the cover‐erosion function can vary considerably, in particular for low cover conditions that prevail on arid and semiarid hillslopes. In this paper the structured spatial distribution of the vegetation cover and associated soil attributes is proposed as one of the possible causes of variation in cover–erosion relationships, in particular in dryland environments where patchy vegetation covers are common. A simulation approach was used to test the hypothesis that hillslope discharge and soil loss could be affected by variation in the spatial correlation structure of coupled vegetation cover and soil patterns alone. The Limburg Soil Erosion Model (LISEM) was parameterized and verified for a small catchment with discontinuous vegetation cover at Rambla Honda, SE Spain. Using the same parameter sets LISEM was subsequently used to simulate water and sediment fluxes on 1 ha hypothetical hillslopes with simulated spatial distributions of vegetation and soil parameters. Storms of constant rainfall intensity in the range of 30–70 mm h^?1 and 10–30 min duration were applied. To quantify the effect of the spatial correlation structure of the vegetation and soil patterns, predicted discharge and soil loss rates from hillslopes with spatially structured distributions of vegetation and soil parameters were compared with those from hillslopes with spatially uniform distributions. The results showed that the spatial organization of bare and vegetated surfaces alone can have a substantial impact on predicted storm discharge and erosion. In general, water and sediment yields from hillslopes with spatially structured distributions of vegetation and soil parameters were greater than from identical hillslopes with spatially uniform distributions. Within a storm the effect of spatially structured vegetation and soil patterns was observed to be highly dynamic, and to depend on rainfall intensity and slope gradient. Copyright © 2005 John Wiley & Sons, Ltd.     

Studies on wind environment around high buildings in urban areas

High buildings or architectural complex in urban areas remarkably distort the urban surface wind fields. As the air flow approaches,local strong wind may appear around the buildings. The strong wind makes the pedestrians on sidewalks, entrances and terrace very uncomfortable and causes the pedestrian level wind environment problem. In this studies, hot-wire wind measurement, wind scouring in wind tunnel and numerical computation were carried out to evaluate the wind environment of tall buildings in the prevailing flow conditions in Beijing areas. The results obtained by three techniques were compared and mutually verified. The conclusions drawn from three approaches agree with each other. Also the advantages and limitations of each method were analyzed. It is suggested that the combination of different techniques may produce better assessment of wind environment around high buildings.     

太原盆地地下水资源模拟研究

山西省太原盆地由于地下水长期超采,引发了地下水降落漏斗、地面沉降等环境地质问题。通过GMS建立地下水水流三维数值模型,基于模型预测了现状开采条件下地下水水位的变化趋势,并提出合理利用地下水资源的措施,为地下水资源的优化管理提供科学依据。     

多级次地下水流系统的最小能耗率原理初探

20世纪60年代初期,Tóth基于定水头上边界条件推导出解析解,得出多级次地下水流系统,是水文地质学里程碑式的突破,成功地解决了一系列理论和实际问题。但Tóth解析解存在的缺陷也长期沿袭：单纯重视数学模拟而忽视物理机制;将地形控制地下水位看成是普适性规律;忽视给定水头上边界数学模拟的失真。这些缺陷,尤其是忽视物理机制探究,不仅妨碍Tóth理论自身发展,而且导致地下水流系统理论尚未被国际水文地质界普遍接受。参照河流动力学中应用的最小能耗率原理,类比提出地下水流最小能耗率的表达式。基于已有的通量上边界地下水流模式数值模拟结果,进一步探究物理机制,归纳得出地下水流系统遵循最小能耗率原理的结论。