运用归一化光谱混合模型分析城市地表组成

运用归一化光谱混合分析(NSMA)方法,用ETM 数据调查广州市海珠区城市地表组成,采用亮度标准化方法减小亮度变化。通过标准化,使亮度差异在每个植被-非渗透性表面-土壤-水体(V-I-S-W)组成中减小或者消除,这样使得一个单一的端元能够代表一种地表组分。在此基础上,通过归一化影像,选择了植被、非渗透性表面、土壤和水体4种端元,运用一种约束光谱混合分析(SMA)模型,分解了不同种类的城市地表组成。通过与已有模型计算结果比较,认为本文所构建的模型较优,其对研究区非渗透性表面估计的均方根误差为12.6%。     

A summer and winter apportionment of particulate matter at urban and rural areas in northern France

The apportionment of atmospheric aerosols undertaken in Northern France during two sampling campaigns allowed to determine the influence of the atmospheric contribution of a heavy industrialized urban center on the particulate matter composition at a nearby rural site. The concentrations of major components and trace elements sampled by bulk filtration have been determined on June–July 2000 and January–February 2001, and the comparison of these two campaigns shows very well the importance of wind directions. The sources of 10 trace elements (Al, Ba, Cu, Fe, K, Mn, Pb, Sr, Ti and Zn) and 7 major components (Cl⁻, NO₃⁻, SO₄²⁻, NH₄⁺, Na, Mg and Ca) are better identified by studying their elemental contribution at each sampling site according to wind sectors. This kind of study shows that the concentrations recorded at the urban sampling site are always higher than those observed at the rural site as well during the summer campaign (about + 35%) as during the winter campaign (+ 90%), because of the predominance of the W–NW wind sector, corresponding to the influence of the urban and industrialized areas.     

Evaluation of the Urban Tile in MOSES using Surface Energy Balance Observations

The UK Met Office has introduced a new scheme for its urban tile in MOSES 2.2 (Met Office Surface Exchange Scheme version 2.2), which is currently implemented within the operational Met Office weather forecasting model. Here, the performance of the urban tile is evaluated in two urban areas: the historic core of downtown Mexico City and a light industrial site in Vancouver, Canada. The sites differ in terms of building structures and mean building heights. In both cases vegetation cover is less than 5%. The evaluation is based on surface energy balance flux measurements conducted at approximately the blending height, which is the location where the surface scheme passes flux data into the atmospheric model. At both sites, MOSES 2.2 correctly simulates the net radiation, but there are discrepancies in the partitioning of turbulent and storage heat fluxes between predicted and observed values. Of the turbulent fluxes, latent heat fluxes were underpredicted by about one order of magnitude. Multiple model runs revealed MOSES 2.2 to be sensitive to changes in the canopy heat storage and in the ratio between the aerodynamic roughness length and that for heat transfer (temperature). Model performance was optimum with heat capacity values smaller than those generally considered for these sites. The results suggest that the current scheme is probably too simple, and that improvements may be obtained by increasing the complexity of the model.     

Towards urbanisation of the non-hydrostatic numerical weather prediction model Lokalmodell (LM)

Numerical weather prediction models are increasingly employed for providing meteorological data for urban air quality applications. Model resolution, physiographic parameters and surface-layer parameterisations need to be adapted to the requirements of the urban boundary layer. The Lokalmodell of the German Weather Service was triple-nested down to a horizontal grid resolution of 1.1 km, urbanised physiographic parameters were implemented, and an additional anthropogenic heat source was introduced. Results of a sensitivity study for a spring dust episode in Helsinki show a clear urbanisation effect of these measures on temperature, humidity and the partitioning of surface fluxes, leading to an increased Bowen ratio and heat storage and an urban heat island effect.     

CFD simulation of airflow over a regular array of cubes. Part II: analysis of spatial average properties

In the first part of this study, results of a computational fluid dynamics simulation over an array of cubes have been validated against a set of wind-tunnel measurements. In Part II, such numerical results are used to investigate spatially-averaged properties of the flow and passive tracer dispersion that are of interest for high resolution urban mesoscale modelling (e.g. non resolved obstacle approaches). The results show that vertical profiles of mean horizontal wind are linear within the canopy and logarithmic above. The drag coefficient, derived from the numerical results using the classical formula for the drag force, is height dependent (it decreases with height). However, a modification of the formula is proposed (accounting for subgrid velocity scales) that makes the drag coefficient constant with height. Results also show that the dispersive fluxes are similar in magnitude to the turbulent fluxes, and that they play a very important role within the canopy. Vertical profiles of turbulent length scales (to be used in k–l closure schemes, where k is the turbulent kinetic energy and l a turbulent length scale) are also derived. Finally the distribution of the values around the mean over the reference volumes are analysed for wind and tracer concentrations.     

Grounding the virtual: The material effects of electronic grocery shopping

This paper addresses the materiality of computer-mediated retailing. The paper uncovers the “hidden geography” of e-commerce, considering how the seemingly simple act of doorstep food delivery is explicated in urban form, and in transportation and communication infrastructures. The paper categorises electronic grocery shopping (EGS) enterprises into three types: “bricks and clicks”, “pure-play” and the “infomediary”, and examines how each type of operation has been materialised in the urban landscape, and the infrastructure upon which each draws. The paper then considers the strategies EGS operations have used to offset the “killer costs” of logistics for electronic commerce. The paper concludes by considering how electronic grocery shopping is embedded within broader trends in consumer behaviour, and how these trends are manifested in the materiality of urban life. The paper argues that online grocers are in the vanguard of ventures habituating customers to the remote ordering and delayed delivery of products to the home. Through controlling this “last mile”, online retailers hope to extend the product offer to higher-margin and more problematic products, which are in themselves unprofitable to distribute direct to the customer, but which can be profitably combined with a grocery shop.     

城市地震灾害风险评价方法研究

风险管理研究已成为防灾减灾工作从“被动救灾”到“主动预防”转化的热门课题。本文回顾了地震灾害风险评价研究进展,指出了现有评价方法的不足。提出了基于地震小区划的城市地震危险性评价方法、基于城市用地类型的城市地震易损性评价方法以及基于专家打分法的城市防震减灾能力评价方法。最后设计了城市地震灾害风险评价流程,并给出了城市地震灾害风险区划算法。     

城市地震灾害风险评价方法研究

从危险性评价、易损性评价以及防灾减灾能力评价3个方面阐述了城市地震灾害风险评价内容.回顾了地震灾害风险评价研究进展,指出了现有评价方法的不足.提出了基于地震小区划的城市地震危险性评价方法、基于城市用地类型的城市地震易损性评价方法以及基于专家打分法的城市防震减灾能力评价方法.最后设计了城市地震灾害风险评价流程,并给出了城市地震灾害风险区划算法.     

城市下垫面反照率变化对北京市热岛过程的影响——个例分析

随着城市的不断发展,城区地表反照率等下垫面物理特征和属性会发生明显的变化,进而会对城市热岛等大气环境形成影响。文中使用中国气象科学研究院开发的新一代数值天气预报模式(GRAPES),针对2004年10月北京一次重空气污染事件中的典型城市热岛过程,分别设计了两种数值试验方案:(1)对照试验,使用模式缺省的城区下垫面反照率参数,取值0.18;(2)敏感性试验,参考同期中国科学院大气物理研究所铁塔280m高度下垫面反照率观测事实,将北京区域城市类型下垫面反照率减小至0.15。通过对比两种试验方案在1km水平分辨率下的24h模拟结果,研究了城市下垫面反照率变化对北京地区城市热岛过程的影响。结果表明:(1)GRAPES模式可成功模拟此次热岛过程中城区和郊区近地面温度的日变化趋势;(2)城市下垫面反照率的变化对城市热岛的发展非常重要,城市反照率下降0.03会使城市热岛强度增强0.8℃左右,结果也更接近实况。这说明随着城市发展引起的地表反照率减小有利于城市热岛强度增加;(3)通过分析地表的长波辐射发现,在城市区域较小反照率情形下,城区的长波辐射始终比郊区大,有利于热岛的形成;同时也有利于城区近地层的风场辐合增加,对此次污染过程的发展是有利的。     

Transfer processes in a simulated urban street canyon

The transfer processes within and above a simulated urban street canyon were investigated in a generic manner. Computational fluid dynamics (CFD) was used to aid understanding and to produce some simple operational parameterisations. In this study we addressed specifically the commonly met situation where buoyancy effects arising from elevated surface temperatures are not important, i.e. when mechanical forces outweigh buoyancy forces. In a geophysical context this requires that some suitably defined Richardson number is small. From an engineering perspective this is interpreted as the important case when heat transfer within and above urban street canyons is by forced convection. Surprisingly, this particular scenario (for which the heat transfer coefficient between buildings and the flow is largest), has been less well studied than the situation where buoyancy effects are important. The CFD technique was compared against wind-tunnel experiments to provide model evaluation. The height-to-width ratio of the canyon was varied through the range 0.5–5 and the flow was normal to the canyon axis. By setting the canyon’s facets to have the same or different temperatures or to have a partial temperature distribution, simulations were carried out to investigate: (a) the influence of geometry on the flow and mixing within the canyon and (b) the exchange processes within the canyon and across the canyon top interface. Results showed that the vortex-type circulation and turbulence developed within the canyon produced a temperature distribution that was, essentially, spatially uniform (apart from a relatively thin near-wall thermal boundary layer) This allowed the temperatures within the street canyon to be specified by just one value T _can , the canyon temperature. The variation of T _can with wind speed, surface temperatures and geometry was extensively studied. Finally, the exchange velocity u _E across the interface between the canyon and the flow above was calculated based on a heat flux balance within the canyon and between the canyon and the flow above. Results showed that u _E was approximately 1% of a characteristic wind velocity above the street canyon. The problem of radiative exchange is not addressed but it can, of course, be introduced analytically, or computationally, when necessary.