Mechanical and thermal properties of HVOF sprayed Ni based alloys with carbide

The objective of the present study is to develop multi-functioned coating to the components, which are made of copper with electroplated Ni and are widely used for steel making industry. In this paper, we report the mechanical and thermal properties of Ni based superalloys with carbide sprayed by high velocity oxygen fuel (HVOF), and the detailed effects of sprayed material, spraying conditions, and initial powder structure on these properties. It was found that, among commercial Ni self-fluxing alloys (without fusing treatment), coating with a carbon content of 0.58 mass% had the most preferable properties, with a good balance of the hardness, strength, and thermal shock resistance. The thermal shock resistance depended not only on the strength of the coating but also on the volume contraction when tested at high temperatures. For the several developed Ni based superalloys with carbide, Ni20Cr8Mo5Fe–WC and Ni16Cr15Mo3–WC demonstrated the prominent adhesion strength and thermal shock resistance with high Galvanic corrosion resistance through optimized spraying condition. Also, 20 mass% NiCr–Cr₃C₂ coating sprayed by using employed relatively small primary particle succeeded in achieving the multi-superior properties; high adhesion strength, high corrosion resistance and thermal shock resistance.     

基于有限元分析的金刚石钻头强度验算公式

在对81／2B125金刚石钻头进行有限元计算分析后，找出最大应力点在金刚石钻头冠部切削告处。通过改变各相关尺寸和结构型式，用有限元法模拟试验过程，在给定结构参数和工艺参数情况下获得多组数据。根据专业知识，参考有限元计算获取的各组数据变化特征，选出拟合较好的公式类型，再采用回归分析方法确定待定系数，最后得出工程上实用的金刚石钻头强度验算公式。用这个公式对81／2B461W和121／4B331金刚石钻头进行了强度验算，经改进设计后钻头在现场使用取得了良好的效果。     

HSLA-80/100钢的焊接

对ＨＳＬＡ－８０／１００钢的焊接性、焊接材料及焊接工艺进行了综述，并指出了现存在的主要问题。     

结构强度储备的评估及结构维修过程的跟踪决策

本文提出了已建成结构在服役过程中构件的强度储备比和结构整体的强度储备比的概念和定义,它们都是随结构使用和维修过程而变化的时间的函数。我们建议以实际的强度储备比作为构件和结构服役安全度的表达方式,给出了构件和结构强度储备比的具体评定方法,并以结构整体的强度储备比作为控制参数决策结构的维修过程,以求得结构全寿命维修的优化控制。本文所提出的方法适用于具有良好的结构重分析程序和精密细致的检测手段的工程。一般重要的结构工程,例如核电站、海上结构、航空航天设备等均具备上述条件。因而本文所提的方法非常实用,可以立即应用于重要的工程项目,具有重大的经济和社会效益。     

关于混凝土钻芯取样法有关标准的讨论

本文对国内不同行业有关混凝土钻总取样方法的标准进行了讨论，供月行在使用和修订相应标准时参考。     

Solubility of amaranth seed proteins in sodium sulphate and sodium chloride: the main factor in quantitative extraction for analysis

Nitrogen was extracted more efficiently from amaranth seed with 0.04 M Na₂SO₄ (5% w/v) than with either 0.09 M or 0.17 M NaCl (5% or 10% w/v), despite both solutions having the same ionic strength (μ= 1). Solubility of saline soluble proteins (albumin ± globulin) was very poor in either water or 1M NaCl, but increased in 0.4M NaCl at alkaline pH between 7 and 10. Globulins were very soluble in 0.4M NaCl at a pH 9. Albumin was the main storage protein. Saline soluble proteins formed very weak gels.     

复合材料压缩破坏模式的缺陷敏感性

本文基于弹塑性分叉理论研究单向纤维增强复合材料的压缩破坏模式和压缩强度对缺陷的敏感性问题。对于常见复合材料,所得结论是:无缺陷或者小缺陷情况的破坏模式为倾斜破坏带;大缺陷情况的破坏模式为水平破坏带;形成水平破坏带的压力值小于形成倾斜破坏带的压力。     

Evaluating Liquefaction Strength of Partially Saturated Sand

A method is presented for evaluating the liquefaction strength of partially saturated sand using the compression wave velocity (P-wave velocity), a new indicator of saturation. Based on laboratory test results, an empirical correlation that relates the liquefaction strength with the pore pressure coefficient B is firstly proposed. The strength is defined as the cyclic stress ratio required to cause liquefaction at a specified number of cycles. With the aid of a theoretical relation between B and the P-wave velocity, an explicit correlation of more interest is then established between the liquefaction strength of sand and its P-wave velocity. A comparison of the predictions using this explicit correlation with laboratory measurements shows a satisfactory agreement. The significance of this method lies in that it makes it possible to evaluate the liquefaction strength of sand as affected by saturation through the measurement of P-wave velocity, which can be made not only in the laboratory but particularly in the field.     

薄管板换热器的设计及薄管板计算的探讨

结合化肥厂丁辛醇装置薄管板换热器的设计 ,着重分析薄管板的特点 ,应用合理的计算方法对薄管板进行强度校核 ,验证这一新型换热器的安全性和经济实用性     

一种高并行度的H.264帧内预测器的VLSI设计

分析了帧内预测的17种模式,对于每个4×4大小块的16个像素点的不同模式的预测公式之间的相同运算,采用数字强度缩减的方法去除计算的冗余,提出了一种高并行度的帧内预测器,可以每个时钟周期处理16个像素点的预测值。基于SMIC0.18μm工艺,用verilog对该设计进行了VLSI实现,综合后的电路的关键路径最大时延为10ns,电路规模不超过1.4万门,数据吞吐率可以达到1600Msamples/s。从实现结果来看,与采用可重构方法的设计相比,该设计在相同的并行度下减小了电路面积,简化了控制逻辑。