石墨化率不同的自焙炭块的热膨胀

采用精密垂直拉杆膨胀仪在１４～１０００℃范围内测量了具有不同石墨化率的自焙炭块的相对热伸长量，并由此获得了热线膨胀系数α。结果表明：石墨化率一定时，α值在较低温度下随温度升高而增加，在较高温度下，α值随温度变化不明显；恒温时，石墨化率越高，α值越低。讨论了单位热应力下的弹性模量概念     

Development of microstructure and mechanical properties of a Ni-base single-crystal superalloy by hot-isostatic pressing

Effects of the hot-isostatic pressing (HIP) process on microstructures and mechanical properties of Ni-base single crystal superalloy CMSX-4 were investigated. In the overall heat treatment process, the HIP treatment remarkably induced the healing behavior of micropores and decreased the pore size and porosity of superalloy CMSX-4 compared with normally treated specimens. The microstructure of γ′ phase after the HIP process showed rather a coarsening tendency and could be developed by the partially solution and aging treatment. Consequently, the elimination of cast micropores using the HIP step resulted in the inhibition of crack initiation in microstructure and improved the stress-rupture lives of Ni-base single crystal superalloy by 185%.     

Self‐regulation during e‐learning: using behavioural evidence from navigation log files

The current paper examined the relationship between perceived characteristics of the learning environment in an e‐module in relation to test performance among a group of e‐learners. Using structural equation modelling, the relationship between these variables is further explored in terms of the proposed double mediation as outlined by Ning and Downing. These authors initially proposed that motivation and self‐regulation strategies are mediators between the perception of the learning environment and performance. In our replication and extension study, we substituted self‐reported self‐regulation with behavioural indicators of self‐regulation using navigation log files and focused on test‐taking rather than general motivation. We proposed that navigational patterns captured using log files can also help deduce self‐regulation in e‐modules and provide information in the absence of self‐reports. Path analyses provide partial support for our navigational hypotheses and the model. Implications of our results for the use of e‐module data and conclusions based on navigation are discussed.     

水泥回转窑的智能控制

文章介绍了PIT Navigator对水泥熟料生产自动化控制的实现,基于神经网络的自学习、自适应控制元件,将相关的过程数据记录下来,随后借助数据关联性进行分析,在预测和自学习过程模型(模型预测控制)中处理这些数据,并计算过程参数的实时预测,使用这些工具,可以实现更稳定的窑况,同时提高产量和降低能耗。     

Time dependences of conduction and self‐heating in acetylene carbon black‐filled high‐density polyethylene composites

The time dependences of electrical conduction and self‐heating behaviors in high‐density polyethylene filled with acetylene carbon black of 0.082 in volume fraction are studied in relation to voltage and ambient temperature. The characteristic decay current constant τ_i, and the exponential growth time constant for self‐heating τ_g are determined for the samples under voltages U above the critical value U_c for the onset of self‐heating. The influences of voltage and ambient temperature on τ_i and τ_g as well as the amplitude of the low‐resistance to high‐resistance switching are discussed on the basis of the random resistor network (RRN) model and the relationship between U_c and the intrinsic resistivity. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 1124–1131, 2006     

Preparation and self‐assembly of poly(diglycidyl maleate‐co‐stearyl methacrylate)

Poly(diglycidyl maleate‐co‐stearyl methacrylate) (P(DGMA‐co‐SMA)) with reactive epoxy groups was synthesized by reaction of poly(maleic anhydride‐co‐stearyl methacrylate) (P(MA‐co‐SMA)) and epichlorohydrin. The effect of precipitant on self‐assembly behaviors of the resultant copolymer was investigated. It was found that vesicles and nanotubule liked aggregates can be obtained through self‐assembly of P(DGMA‐co‐SMA) in THF solution using CH₃CH₂OH (EtOH) as precipitant while spheral aggregates can be obtained using H₂O as precipitant. The mechanism of the self‐assembly behavior was discussed. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

细颗粒循环料腿的自力平衡原理及实验研究

本文介绍了一种固体细颗粒循环料腿的自力平衡结构模型（单气路式）及其工作原理，对该结构模型进行了流体力学分析，并分析了各种因素对自力平衡效果的影响趋势。在冷态模型装置上进行的实验测定验证了料腿的自平衡效果，并获得了与理论分析相一致的结论。由于该结构简单，无机械运动部件，并且易满足耐高温、耐高压及耐磨损等性能要求，特别是它能在较宽的工作范围内使料腿自力稳定，它的应用可望改善固体料循环控制的可操作性，从而对特定的工作系统有利。     

离子自拆分法合成D-(一)-对羟基苯甘氨酸

研究了用离子自拆分方法拆分外消旋对羟基苯甘氨酸(DL-HPG)而合成D-(—)-对羟基苯甘氨酸(D-HPG)。采用正交试验确定了最佳反应条件:在丙酮和水的混合溶剂中,等物质的量的DL-HPG和硫酸在60℃下加入D-HPG,搅拌反应15min左右,降温过滤得到D-HPG的硫酸盐,水解即可得到D-HPG(光学纯度99％),一次性总收率达到20％。适于工业生产。     

Continuous Self‐Collision Detection for Deformable Surfaces Interacting with Solid Models

In this paper, we propose a new continuous self‐collision detection (CSCD) method for a deformable surface that interacts with a simple solid model. The method is developed based on the radial‐view‐based culling method. Our method is suitable for the deformable surface that has large contact region with the solid model. The deformable surface may consist of small round‐shaped holes. At the pre‐processing stage, the holes of the deformable surface are filled with ghost triangles so as to make the mesh of the deformable surface watertight. An observer primitive (i.e. a point or a line segment) is computed so that it lies inside the solid model. At the runtime stage, the orientations of triangles with respect to the observer primitive are evaluated. The collision status of the deformable surface is then determined. We evaluated our method for several animations including virtual garments. Experimental results show that our method improves the process of CSCD.     

Hot compaction of woven nylon 6,6 multifilaments

We describe a study of the hot compaction of woven nylon 6,6 multifilaments produced by a patented procedure, developed at the University of Leeds, for creating novel single‐polymer composites. In this process, an assembly of oriented elements, often in the form of a woven cloth, is held under pressure and taken to a critical temperature so that a small fraction of the surface of each oriented element is melted, which on cooling recrystallizes to form the matrix of the single‐polymer composite. This process is therefore a way of producing novel high‐volume‐fraction polymer/polymer composites in which the two phases are chemically the same material. Nylon is an obvious candidate material for this process because oriented nylon multifilaments are available on a commercial scale. The aim of this study was first to establish the conditions of temperature and pressure for the successful hot compaction of oriented nylon 6,6 fibers and second to assess the mechanical properties of the manufactured hot‐compacted nylon sheets. A crucial aspect of this work, not previously examined in hot‐compaction studies of other oriented polymers, was the sensitivity of the properties to absorbed water, with a significant change in the properties measured immediately after hot‐compaction processing and 2 weeks later when 2% water had been absorbed by the compacted nylon sheets. As expected, the water uptake had a greater effect on those properties that depended on local chain interactions (e.g., the modulus and yield strength) and less effect on those properties that depended on the large‐scale properties of the molecular network (e.g., strength). The only negative aspect of the properties of the hot‐compacted nylon sheets was the elevated‐temperature performance of the wet sample, with the modulus falling to a very low value at a temperature of 80°C. However, apart from the elevated‐temperature performance, the majority of the measured properties of the hot‐compacted nylon sheets were comparable to those of hot‐compacted polypropylene and poly(ethylene terephthalate). © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 991–997, 2006