成都市火车南站斜拉桥斜拉索安装工艺

采用倒链葫芦、卷扬机或软牵引装置对斜拉索进行牵引安装 ,使牵引力达到 5 0 0余kN ,解决了斜拉索安装拉力大这一施工难题。     

桥梁板式橡胶支座局部脱空设计成因分析

经过对支座转角组合进行的分析,在研究柔性高墩墩顶转角位移计算方法的基础上,提出了更加严密的支座转角验算修正公式,得出修正后的转角验算公式易于应用的结论,对于保证板式橡胶支座在使用过程中不脱空有重要的意义。     

Thermal and thermoelastic properties of fast extrusion furnace (FEF) carbon black loaded SBR vulcanizates

The effect of FEF carbon black as filler on the thermal capacity c, diffusivity a, and thermal conductivity λ, of styrene butadiene rubber (SBR) composites in the temperature range 300–420 K was studied. The filler strongly increases the thermal diffusivity, whilst strongly decreasing the thermal capacity and the thermal conductivity (except at high FEF content ≥80 phr). The influence of the filler on the thermoelastic behaviour of the same composites was also investigated. It was found that the thermoelastic temperature change (ΔT) increased with carbon black concentration as well as the entropy change per unit extension.     

The method of testing of XLPE cable insulation resistance to partial discharges and electrical treeing

The paper gives a method of model XLPE medium voltage cable insulation testing for partial discharges and electrical treeing with a point to plane test geometry. Based on this method, a comparative estimate of insulation resistance to treeing and partial discharges have been made. XLPE crosslinked by different methods (steam medium and hot nitrogen medium) and with varying contents of inorganic filler kaolin were tested. The characteristics of partial discharges were measured by means of a pulse height analyser characterized with a microscope. The data have been analysed statistically.     

发展乡镇有线电视的几点建议

分析了乡镇有线电视目前面临的危机和存在的问题，提出了解决问题的方法和发展乡镇有线电视的几项建议。     

数字电视整体转换后的创新

有线电视数字化整体转换已进入全面推广阶段。整体转换后，广电网络运营商如何扩大业务范围，开发多种增值业务，使用户真正体验到数字化的好处并乐意消费，从而提高经营效益，这一切都离不开创新，必须及早进行业务、营销、服务、运营等方面的创新。     

浅谈胶条接头与模具设计

简要地介绍了橡胶条常见接头工艺方法、应用特点及模具结构与设计方法。     

Monomer recycling for vulcanized silicone rubbers in the form of cyclosiloxane monomers. Role of acid buffers

The KOH-catalyzed depolymerization of vulcanized silicone rubbers to reproduce cyclosiloxane monomers was studied. First, the depolymerization was carried out in toluene with varying amounts of KOH to find that the yield of monomers first increased and then decreased with the increment of KOH, the highest yield was 65% at the molar ratio KOH/(Si–O) UNITS=0.08. At the molar ratio 0.13 in the absence of solvent, the monomers yield was 46%. However, when an acid buffer such as KH₂PO₄ and KCOOC₆H₄COOH was added after the KOH-catalyzed depolymerization was over, the product yield was increased remarkably to more than 80%.     

用瓦勃氏呼吸仪测定橡胶废水可生化性

本文介绍了利用瓦勃氏呼吸仪进行橡胶废水测定的过程和方法,并用配制的橡胶废水进行了二组实验,认为橡胶废水是易生化的,并对氧化率计算方法提出了修正,使之更接近于实际情况。