基于PTFE的PCB的多层层压方法

介绍了采用不同材料类型的粘结膜、半固化片、所需设备和粘结材料,用于生产低到高层数的PTFE多层板的情况。     

论工艺参数对烧结产质量的影响及分析

本文论述了正确认识烧结工艺参数对搞好烧结生产的意义，介绍了烧结工艺参数其及相互关系，详述了烧结主要工艺参数对其产质量的影响，提出了烧结工艺参数认识的几点结论性意见。     

改进的GMDH方法及其在参数预报中的应用

本文在综合了ＧＭＤＨ方法中几种有效的改进算法的基础上，进一步研究了变量预选及部分表达式的构成问题，采用最优化方法确定变量最佳组成式并进行变量筛选，由此得到精度更高、稳定性较好的模型，将其应用于聚丙烯熔指数的预报，仿真结果令人满意。     

基于Legendre多项式的随机连续系统的Markov参数估计

本文在讨论连续Ｗｉｓｅｎｒ过程的Ｌｅｇｅｎｄｒｅ多项式逼近值的相关性和Ｗｉｅｎｅｒ过程扰动下连续线性系统基于该正交多项的最小二乘估计有偏性后，提出了无偏一致的且数估计误差方差最小的Ｍａｒｋｏｖ估计（最小方差估计）算法，并给出本文方法的仿真结果。     

Valid parameter range analyses for chemical reaction kinetic models

The present work quantifies the relations between the structure of a chemical reaction kinetic model, its valid parameter range, and the truncation error tolerance of the model. General methods are presented to solve the three important problems of valid parameter range analysis: (1) identification of the valid parameter range of a kinetic model, (2) estimation of the error tolerance required when applying a kinetic model over a specified parameter range, and (3) improvement of existing model generation algorithms to construct more robust models. Finally, the relationship between a model's structure, its valid parameter range, and the truncation error tolerance are illustrated by the flexibility-tolerance-model graph. The new methods are applied to pyrolysis of methane/ethane mixtures.     

Pultruded fibre reinforced polyurethane composites II. Effect of processing parameters on mechanical and thermal properties

This paper presents a novel process for the fabrication of pultruded polyurethane (PU) composites. The effects of the processing parameters on the mechanical properties (flexural strength and flexural modulus, etc.) and thermal properties (HDT) of the fibre reinforced PU composites by pultrusion have been studied. The processing parameters investigated include pulling rate (in-line speed), die temperature, filler type and content, and post-cure time and temperature. Results show that the composites possessed various optimum pulling rates at different die temperatures. On the basis of the DSC diagram, the swelling ratio, the mechanical properties and the thermal properties of composites, the optimum die temperature can be determined. It is found that the mechanical and thermal properties increase with filler content for various types of filler. The mechanical and thermal properties increase at a suitable post-cure temperature and time. Furthermore, the properties which decreased due to the degradation of composite materials for a long post-cure time will be discussed.     

Precipitation behavior of σ phase in fusion zone of dissimilar stainless steel welds during multi-pass GTAW process

The purpose of this study is to investigate the precipitation characteristics of σ phase in the fusion zone of stainless steel welds at various welding passes during a tungsten are welding (GTAW) process. The morphology, quantity, and chemical composition of the δ-ferrite and σ phase were analyzed using optical microscopy (OM), a ferritscope (FS), a X-ray diffractometer (XRD), scanning electron microscopy (SEM), an electron probe micro-analyzer (EPMA), and a wavelength dispersive spectrometer (WDS), respectively. Massive δ-ferrite was observed in the fusion zone of the first pass welds during welding of dissimilar stainless steels. The σ phase precipitated at the inner δ-ferrite particles and decreased δ-ferrite content during the third pass welding. The σ and δ phases can be stabilized by Si element, which promoted the phase transformation of σ→ϱ+λ₂ in the fusion zone of the third pass welds. It was found that the σ phase was a Fe−Cr−Si intermetallic compound found in the fusion zone of the third pass welds during multi-pass welding.     

冷弯型钢纵向变形的理论分析及计算

对冷弯型钢的纵向变形过程进行了力学分析，得到了变形微分方程，求得了转动角的理论公式，并对其变形形状进行了分析计算。     

动态矩阵控制系统稳定域的根轨迹分析

本文使用根轨迹技术从理论上分析了纯滞后工业过程参数变化对系统稳定性的影响,得到了一个与设计参数有关的稳定域,从而为设计参数自动整定提供了参考。     

调节对象参数和运动特性随工况变化的分析

水轮机调节对象的许多参数都是随运行工况变化的。以调节对象线性化模型为基础，从1个实例计算人手，计算了不同工况下水轮机传递系数和发电机6个参数的变化情况，进而计算这些参数变化对捌节对象特征根的影响。通过汁算表明，其水力振荡衰减速度与出力有关．而系统的其他运动特性随工况变化较小。