Optimization of ultraviolet ozone treatment process for improvement of polycaprolactone (PCL) microcarrier performance

Growing cells on microcarriers may have overcome the limitation of conventional cell culture system. However, the surface functionality of certain polymeric microcarriers for effective cell attachment and growth remains a challenge. Polycaprolactone (PCL), a biodegradable polymer has received considerable attention due to its good mechanical properties and degradation rate. The drawback is the non-polar hydrocarbon moiety which makes it not readily suitable for cell attachment. This report concerns the modification of PCL microcarrier surface (introduction of functional oxygen groups) using ultraviolet irradiation and ozone (UV/O₃) system and investigation of the effects of ozone concentration, the amount of PCL and exposure time; where the optimum conditions were found to be at 60,110.52 ppm, 5.5 g PCL and 60 min, respectively. The optimum concentration of carboxyl group (COOH) absorbed on the surface was 1495.92 nmol/g and the amount of gelatin immobilized was 320 ± 0.9 µg/g on UV/O₃ treated microcarriers as compared to the untreated (26.83 ± 3 µg/g) microcarriers. The absorption of functional oxygen groups on the surface and the immobilized gelatin was confirmed with the attenuated total reflectance Fourier transformed infrared spectroscopy (ATR-FTIR) and the enhancement of hydrophilicity of the surface was confirmed using water contact angle measurement which decreased (86.93°–49.34°) after UV/O₃ treatment and subsequently after immobilization of gelatin. The attachment and growth kinetics for HaCaT skin keratinocyte cells showed that adhesion occurred much more rapidly for oxidized surfaces and gelatin immobilized surface as compared to untreated PCL.     

Cost of selective feeding by the blue mussel (Mytilus trossulus) as measured by respiration and ammonia excretion rates

The metabolic cost as measured by respiration and ammonia excretion rates associated with a selective as compared to a non-selective feeding behaviour was determined for the blue mussel, Mytilus trossulus. Mussels were challenged with four environmentally relevant seston matrices of different quality and quantity, which were known to evoke either a sorting response (i.e., selective feeding) where organic-rich particles were selected over inorganic particles as compared to no sorting (i.e., non-selective) where either inorganic or organic particles were ingested by the bivalve. Seston matrices were prepared by mixing known quantities of silt and algae such that the following extent of feeding responses would occur; no pre-sorting of ingested material, (1) no algae+50 mg silt l⁻¹, (2) 150×10⁶ cells l⁻¹ of algae+no silt, and, where pre-sorting of ingested material occurred, (3) 20×10⁶ cells l⁻¹ of algae and 20 mg l⁻¹ of silt, and (4) 150×10⁶ cells l⁻¹ of algae and 50 mg l ¹ of silt. A control, which represented basal metabolism consisting of mussels exposed only to filtered seawater (0.45 μm), was included for a total of five treatments. Mussel respiration and ammonia excretion rates were independent of whether mussels were pre-sorting or not sorting ingested material. Of the four matrices, only rates determined for conditions of maximum seston quality and quantity where pre-sorting of the seston occurred were significantly different from control mussels (p<0.05, ANOVA). Estimates of net energy used for feeding, where net energy is total energy intake (food) minus energy expenditure (energy lost through respiration and excreta as measured by ammonia excretion rates), indicated that feeding, whether selective or non-selective required only 0.92% of net energy intake. Hence, mussels appear to be highly adapted to a dynamic food environment with negligible costs associated with the feeding process, even when significant pre-selection of organic-rich particles occurs.     

Diagnosis and Recommendation Integrated System Assessment of the Nutrients Limiting and Nutritional Status of Tomato

Tomato is an important field crop, and nutritional imbalances frequently reduce its yield. Diagnosis and Recommendation Integrated System (DRIS), uses ratios for nutrient deficiency diagnosis instead of absolute concentration in plant tests. In this study, local DRIS norms for the field tomatoes were established and the nutrient(s) limiting tomatoes yield were determined. Tomato leaves were analyzed for nutrients, to identify nutritional status using the DRIS approach. One hundred tomatoes fields were selected from Chatter Plain Khyber Pakhtunkhwa and the Sheikupura Punjab Pakistan. The first fully matured leaf was sampled, rinsed, dried and ground for analyzing P, K, Ca, Mg, Cu, Fe, Mn and Zn using an Inductively Coupled Plasma Atomic Emission Spectrophotometer (ICP AES). Plant tissue N and S were measured by the combustion method. The tomatoes yields were recorded at each location. The data were divided into high-yielding (≥3.79 kg/10 plant) and low-yielding (<3.79 kg/10 plant) populations and norms were computed using standard DRIS procedures. High-yielding plant population had a statistically greater mean S and Fe than the low-yielding population. The average balance index, the sum of functions, for S and Fe were −11.04 and −5.17 which reflected deficiency of S and Fe. Plant nutrients norms established may optimize plant nutrition in field tomatoes for high yield.     

Sulfonate and sulfamate derivatives possessing benzofuran or benzothiophene nucleus as potent carbonic anhydrase II/IX/XII inhibitors

In the current work, we report the discovery of new sulfonate and sulfamate derivatives of benzofuran- and benzothiophene as potent inhibitors of human carbonic anhydrases (hCAs) II, IX and XII. A set of derivatives, 1a–t, having different substituents on the fused benzofuran and benzothiophene rings (R = alkyl, cyclohexyl, aryl, NH₂, NHMe, or NMe₂) was designed and synthesized. Most of the derivatives exhibited higher potency than acetazolamide as inhibitors of the purified hCAII, IX and XII isoforms. The most potent inhibitors for hCAII, hCAIX and hCAXII were 1g, 1b and 1d with an IC₅₀ ± SEM values of 0.14 ± 0.03, 0.13 ± 0.03 and 0.17 ± 0.06 µM, respectively. In addition, compounds 1d and 1n exerted preferential inhibitory effect against hCAXII isozyme with good potencies. Some selected compounds were docked within the active pocket of these isozymes and binding of the molecules revealed that sulfonate and sulfamate rings were located towards the active cavity and compounds coordinated to zinc ions.     

Error evaluation in the laboratory testing process and laboratory information systems

BackgroundThe laboratory testing process consist of five analysis phases featuring the total testing process framework. Activities in laboratory process, including those of testing are error-prone and affect the use of laboratory information systems. This study seeks to identify error factors related to system use and the first and last phases of the laboratory testing process using a proposed framework known as total testing process-laboratory information systems.MethodsWe conducted a qualitative case study evaluation in two private hospitals and a medical laboratory. We collected data using interviews, observations, and document analysis methods involving physicians, nurses, an information technology officer, and the laboratory staff. We employed the proposed framework and Lean problem solving tools namely Value Stream Mapping and A3 for data analysis.ResultsErrors in laboratory information systems and the laboratory testing process were attributed to failure to fulfill user requirements, poor cooperation between the information technology unit and laboratory, inconsistency of software design in system integration, errors during inter-system data transmission, and lack of motivation in system use. The error factors are related to system development elements, namely, latent failures that considerably affected the information quality and system use. Errors in system development were also attributed to poor service quality.ConclusionsComplex laboratory testing process and laboratory information systems require rigorous evaluation in minimizing errors and ensuring patient safety. The proposed framework and Lean approach are applicable for evaluating the laboratory testing process and laboratory information systems in a rigorous, comprehensive, and structured manner.     

Landscape ecology and urban biodiversity in tropical Indonesian cities

Indonesia has recently been faced with a number of great problems: poverty, natural disasters such as tsunami, earthquakes, flooding and typhoons, volcanic eruptions, loss of biodiversity, decreasing water quality and quantity, increased pollution, and aesthetic degradation of the landscape. These disturbances have been caused by rapid changes in land use and land cover, deforestation, the application of monoculture farming systems in commercial agriculture, urbanization, industrialization, and other types of infrastructure development. The government, urban communities and companies have promoted some programs to ameliorate the problem of environmental degradation. The government has ratified law no. 26/2007 as a commitment to sustainability; this law ensures that cities are obliged to provide green open spaces covering a minimum of 30% of urbanized areas. Many metropolitan cities have feverishly enacted policies to promote greening programs, such as those applied in Jakarta. However, a new town—Sentul City—has engaged in policies that aim to create a well-designed eco-city with urban greenery and ecological networks. This new policy is supposed to herald a better future for urban quality. It is expected that green spaces will provide environmental services: water resource management, biodiversity conservation, carbon sequestration, and landscape beauty.     

Elemental sulfur improves growth and phytoremediative ability of wheat grown in lead-contaminated calcareous soil

Little is known about the effect of elemental sulfur on lead uptake and its toxicity in wheat. A pot experiment was conducted with the purpose to examine the impact of sulfur on improving Pb solubility in soil, and uptake and accumulation in wheat plants. The effect of three levels of lead (0, 50, and 100 mg/kg soil) and sulfur (0, 150, and 300 mmol/kg soil) was tested in all possible combinations. Root dry matter, straw, and grain yields, and the photosynthetic and transpiration rates decreased significantly with increase in the concentration of Pb in the soil. However, sulfur fertilization in the presence of Pb improved the photosynthetic and transpiration rates and consequently increased the straw and grain yields of wheat. It also enhanced Pb accumulation in roots, its translocation from roots to shoot, and accumulation in grain. S and Zn contents of different plant parts were also enhanced. Thus, by mitigating the toxic effect of Pb and improving wheat growth, sulfur enhances Pb accumulation by the aboveground plant parts and hence the phytoextraction capacity of wheat. However, total accumulation of Pb shows that wheat plant cannot be considered as a suitable candidate for phytoremediation.     

Deletion of cscR in Escherichia coli W improves growth and poly-3-hydroxybutyrate (PHB) production from sucrose in fed batch culture

Sucrose has several advantages over glucose as a feedstock for bioprocesses, both environmentally and economically. However, most industrial Escherichia coli strains are unable to utilize sucrose. E. coli W can grow on sucrose but stops growing when sucrose concentrations become low. This is undesirable in fed-batch conditions where sugar levels are low between feeding pulses. Sucrose uptake rates were improved by removal of the cscR gene, which encodes a protein that represses expression of the sucrose utilization genes at low sucrose concentrations. Poly-3-hydroxybutyrate (PHB) was used as a model compound in order to assess the effect of improved sugar utilization on bio-production. In the cscR knockout strain, production from sucrose was improved by 50%; this strain also produced 30% more PHB than the wild-type using glucose. This result demonstrates the feasibility of utilizing sucrose as an industrial feedstock for E. coli-based bioprocesses in high cell density culture.     

Synthesis of magnetic resonance-, X-ray- and ultrasound-visible alginate microcapsules for immunoisolation and noninvasive imaging of cellular therapeutics

Cell therapy has the potential to treat or cure a wide variety of diseases. Non-invasive cell tracking techniques are, however, necessary to translate this approach to the clinical setting. This protocol details methods to create microcapsules that are visible by X-ray, ultrasound (US) or magnetic resonance (MR) for the encapsulation and immunoisolation of cellular therapeutics. Three steps are generally used to encapsulate cellular therapeutics in an alginate matrix: (i) droplets of cell-containing liquid alginate are extruded, using an electrostatic generator, through a needle tip into a solution containing a dissolved divalent cation salt to form a solid gel; (ii) the resulting gelled spheres are coated with polycations as a cross-linker; and (iii) these complexes are then incubated in a second solution of alginate to form a semipermeable membrane composed of an inner and an outer layer of alginate. The microcapsules can be rendered visible during the first step by adding contrast agents to the primary alginate layer. Such contrast agents include superparamagnetic iron oxide for detection by (1)H MR imaging (MRI); the radiopaque agents barium or bismuth sulfate for detection by X-ray modalities; or perfluorocarbon emulsions for multimodal detection by (19)F MRI, X-ray and US imaging. The entire synthesis can be completed within 2 h.