三叶草根—土复合体抗剪切强度试验研究

本文以三叶草为样本,研究其含根量分别为0.0 g/60 cm3、0.1 g/60 cm3、0.3 g/60 cm3、0.5 g/60 cm3、0.7 g/60 cm3和1.0 g/60 cm3的根—土复合体抗剪切强度,试验中对三叶草根-土复合体进行了法向应力分别为100 kPa、200 kPa、300 kPa及400 kPa下的抗剪强度。结果表明:三叶草根系增加了土体的抗剪强度;根—土复合体在同一含根量下,其抗剪强度均随着法向应力的增加而增加;在同一法向应力下,随着含根量的增大,根—土复合体的抗剪强度、粘聚力和内摩擦角均呈现出先增大后减小的趋势,均在含根量为0.5 g/60 cm3时出现最大值。三叶草含根量为0.5-0.7 g/60 cm3时护坡效果最好。     

Effect of Ag addition on the thermal stability and glass-forming ability of Zr<Subscript>35</Subscript>Ti<Subscript>30</Subscript>Cu<Subscript>7.5</Subscript>Be<Subscript>27.5</Subscript> bulk metallic glass

The thermal stability and glass forming ability (GFA) of Zr35-xTi30Cu7.5Be27.5Agx (x = 0-10) alloys were studied by X-ray diffraction (XRD), differential scanning calorimetry (DSC) and ultrasonic techniques. We found that the addition of 1 at.% Ag can considerably enhance the GFA as indicated by an increase in the critical glass dimension from 15 mm in the Zr35Ti30Cu7.5Be27.5 alloy to 20 mm in the Zr34Ti30Cu7.5Be27.5Ag1 alloy. However, with the addition of more Ag the supercooled liquid region (△Tx) and y parameter (defined as Tx/(Tg+Tl)) drastically decreased from 155 K and 0.436 to 76 K and 0.363, respectively, resulting in a decrease in the GFA. Additionally, the elastic constant (the ratio of shear modulus to bulk modulus or Poisson’s ratio) was also used as a gauge to evaluate the GFA in Zr35-xTi30Cu7.5Be27.5Agx alloys.     

Catalytic oxidation of phenol in wastewater-A new application of the amorphous Fe78Si9B13 alloy

The amorphous Fe78Si9B13 alloy was used as a heterogeneous Fenton catalyst in the process of phenol degradation.The influences of main operating parameters such as reaction temperature,catalyst amount,hydrogen peroxide dosage and initial pH of solution on phenol degradation rate were investigated.The maximum mineralization of phenol was achieved at 60°C,6 g/L Fe78Si9B13, 0.31 mol/L hydrogen peroxide,with an initial pH of 2.5.More than 99%of phenol was completely removed under the optimum conditions within 10 min for a solution containing 1000 mg/L of phenol.Batch experiments for solutions containing phenol con- centrations ranging from 50 to 2000 mg/L were investigated under the above conditions and the same excellent degradation rate was obtained.The Fe78Si9B13 showed better catalytic activity than iron powder and Fe 2+ .Addition of n-butannol(hydroxyl radical scavenger)decreased the degradation rate of phenol,which demonstrates that hydroxyl radicals were mainly responsible for the removal of phenol.We demonstrated that phenol may be degraded by hydroxyl radicals decomposed by hydrogen peroxide on the surface of Fe78Si9B13 and illustrated the reaction mechanism for this process.This amorphous alloy exhibited high stability in recycling experiments and showed excellent reuse performance even after continuous operations of 8 cycles.     

In vitro study of poly(ethylene carbonate) as a drug-eluting stent coating

An in vitro feasibility study of the use of poly(ethylene carbonate) (PEC) as a biodegradable coating material for drug-eluting stents is reported, and the performance of PEC is compared with that of poly(lactic-co-glycolic acid) (PLGA). Scanning electron microscopy (SEM) images of PEC and PLGA discs after treatment with an alkaline KO2 solution as a superoxide source showed that the PEC maintained its integrity whereas holes and small particles appeared during the treatment of PLGA. Sirolimus and paclitaxel were loaded into PEC and PLGA in order to study drug release performance. Attenuated total reflectance–infrared (ATR– FTIR) spectroscopy of sirolimus, PEC and the sirolimus-loaded PEC coating showed that no chemical reaction occurred between sirolimus and PEC. The results of atomic force microscopy (AFM) revealed that the mean roughness (Ra) values of the bare metal stent (BMS) and the drugeluting stent (DES) were 2.3 nm and 1.0 nm, respectively. After balloon expansion experiments, no delamination or destruction of the PEC coating was observed. The drug release profile of sirolimus was different from that of paclitaxel when PEC was employed as the drug carrier, and the release curves of sirolimus were different when PEC and PLGA were used as drug carriers. All the experimental results demonstrated that PEC was one of the best potential stent-coating materials.     

基于贝塔分布的抗拔桩承载力可靠度分析

以12根抗拔桩承载力为研究对象,利用4参数的贝塔分布拟合出抗拔桩承载力试计比（承载力实测值和计算值的比）的概率分布.通过K-S检验法检验指出：贝塔分布的拟合精度优于常见的正态分布、对数正态分布和极值I型分布.利用蒙特卡罗法计算出抗拔桩承载力的可靠度指标,计算结果表明：承载力试计比的均值、荷载组合、荷载比和安全系数对可靠度有显著的影响.最后利用荷载抗力系数设计法给出了抗拔桩的抗力系数.     

基于多尺度的小基高比立体匹配方法

针对小基高比立体匹配中的＂黏合＂现象和深度精度问题,提出一种小基高比立体匹配方法.该方法通过将自适应窗口技术和多窗口策略相结合为参考图像确定匹配窗口;然后根据规范化互相关函数和＂胜者全取＂策略计算整数级视差;再以整数级视差为基础利用基于二分法的亚像素匹配方法计算亚像级视差;最后采用基于图像分割的迭代传播方法以获得稠密视差图.实验结果表明：该立体匹配算法减少了小基高比匹配中的＂黏合＂现象,同时获得了稠密的高精度亚像素级视差,其亚像素精度可优于1/20个像元.     

IAE-adaptive Kalman filter for INS/GPS integrated navigation system

1 .INTRODUCTIONInertial navigation system(INS) and Global posi-tioning system ( GPS) are two major navigationsystems now widely usedfor marine applications a-round the world. Considering both systems pos-sess complementary working characteristics , abooming attention is focused on finding effectivemethods to combine the two different systems toconstituteintegrated navigation system with higheraccuracy and better performance .Information likeGPS position and velocity are often chosen as…     

油莎豆中蛋白质、脂肪和糖的提取及测定

本文利用化学方法从油莎豆中提取出了蛋白蛋、脂肪和糖,并进行了定性和定量分析,为大面积推广种植油莎豆、开发利用其相应产品提供了科学依据。     

双曲空间H_n(-1)中k-n型Neuberg-Pedoe不等式

应用距离几何理论与方法,研究双曲空间H_n(-1)中关于n维单形的几何不等式问题,建立了双曲空间中涉及两个n维单形体积与其k维子单形k维体积的k-n型Neuberg-Pedoe不等式与P.Chiakuei不等式,并给出它的一些应用.     

深抽机抽排水采气工艺特点和系统装备合理配套

本文论述了在深抽条件下实施机抽排水采气工艺特点及其对系统装备的响应;分析了系统装备配置的基本要求;提出了系统装备合理配置的两种方案,并进行了技术评价。