Assessing groundwater storage changes in the Nubian aquifer using GRACE data

Gravity Recovery and Climate Experiment (GRACE) level two (L2) data is used in estimating the groundwater storage changes (GWSC) in the Nubian Sandstone Aquifer System (NSAS). This set of data consists of spherical harmonics coefficients with specific degree and order. The GRACE data is de-correlated using a sixth degree polynomial in order to reduce the effect of the noise error resulting from the correlation between the spherical harmonics coefficients with the same degree parity. The GRACE estimates of GWSC are smoothed using Gaussian filter with half width of 1000 km. This half width is chosen in order to maximize the correlation between the GRACE estimates of GWSC and previous modeling results of the NSAS. The loss in groundwater storage occurring in each of the four countries sharing the NSAS is calculated to assess the sustainability of using the NSAS as a water resource in each country. The overarching finding in this study is that NSAS is losing its groundwater storage at a very high rate. Also, it is found that Egypt is the fastest in losing its groundwater storage from the NSAS. This loss of groundwater storage in Egypt may not necessarily be resulting from in-country extractions because of the trans-boundary nature of this aquifer. The GRACE-based estimates are found to be close to available data and previous modeling results of the NSAS.     

Wrench structural deformation in Ras Al Hilal-Al Athrun area, NE Libya: a new contribution in Northern Al Jabal Al Akhdar Belt

Al Jabal Al Akhdar is a NE/SW- to ENE/WSW-trending mobile part in Northern Cyrenaica province and is considered a large sedimentary belt in northeast Libya. Ras Al Hilal-Al Athrun area is situated in the northern part of this belt and is covered by Upper Cretaceous–Tertiary sedimentary successions with small outcrops of Quaternary deposits. Unmappable and very restricted thin layers of Palaeocene rocks are also encountered, but still under debate whether they are formed in situ or represent allochthonous remnants of Palaeocene age. The Upper Cretaceous rocks form low-lying to unmappable exposures and occupy the core of a major WSW-plunging anticline. To the west, south, and southeast, they are flanked by high-relief Eocene, Oligocene, and Lower Miocene rocks. Detailed structural analyses indicated structural inversion during Late Cretaceous–Miocene times in response to a right lateral compressional shear. The structural pattern is themed by the development of an E–W major shear zone that confines inside a system of wrench tectonics proceeded elsewhere by transpression. The deformation within this system revealed three phases of consistent ductile and brittle structures (D₁, D₂, and D₃) conformable with three main tectonic stages during Late Cretaceous, Eocene, and Oligocene–Early Miocene times. Quaternary deposits, however, showed at a local scale some of brittle structures accommodated with such deformation and thus reflect the continuity of wrenching post-the Miocene. D₁ deformation is manifested, in Late Cretaceous, via pure wrenching to convergent wrenching and formation of common E- to ENE-plunging folds. These folds are minor, tight, overturned, upright, and recumbent. They are accompanied with WNW–ESE to E–W dextral and N–S sinistral strike-slip faults, reverse to thrust faults and pop-up or flower structures. D₂ deformation initiated at the end of Lutetian (Middle Eocene) by wrenching and elsewhere transpression then enhanced by the development of minor ENE–WSW to E–W asymmetric, close, and, rarely, recumbent folds as well as rejuvenation of the Late Cretaceous strike-slip faults and formation of minor NNW–SSE normal faults. At the end of Eocene, D₂ led to localization of the movement within E–W major shear zone, formation of the early stage of the WSW-plunging Ras Al Hilal major anticline, preservation of the contemporaneity (at a major scale) between the synthetic WNW–ESE to E–W and ENE–WSW strike-slip faults and antithetic N–S strike-slip faults, and continuity of the NW–SE normal faults. D₃ deformation is continued, during the Oligocene-Early Miocene, with the appearance of a spectacular feature of the major anticline and reactivation along the E–W shear zone and the preexisting faults. Estimating stress directions assumed an acted principal horizontal stress from the NNW (N33°W) direction.     

Hydro-mechanical evaluation of stabilized mine tailings

. In this study, mine tailings waste was stabilized using a combination of lime, fly ash type "C", and aluminum. Treated samples were subjected to mineral identification for evaluating the formation of ettringite and gypsum. Also, unconfined compression, hydraulic conductivity, and cyclic freeze and thaw tests were performed to evaluate the hydro-mechanical properties of the stabilized samples. Experimental results have shown that the application of lime and fly ash type "C" to high sulfate content tailings has improved its plasticity, workability, and volume stability. Moreover, upon addition of aluminum to lime and fly ash in a sulfate-rich environment, ettringite and calcium sulfo-aluminate hydrate are formed in these samples. Application of 5% lime, 10% fly ash type "C", in combination with 110 ppm aluminum, resulted in the formation of a solid monolith capable of producing more than 1,000 kPa of unconfined compressive strength, and reduced tailings permeability to 1.96᎒^–6 cm s^–1, which is less than the recommended permeability of 10^–5 cm s^–1 by most environmental protection agencies for reusability of solidified/stabilized samples. The permeability of the treated tailings samples remained below the recommended permeability, even after exposing the treated samples to 12 freeze and thaw cycles. Therefore, based on the experimental results, it is concluded that treatment of high sulfate-content tailings with lime and fly ash, combined with the availability of aluminum for reactions, is a successful method of solidifying highly reactive mine tailings.     

Thrust tectonics along the north-western continental margin of Sabah/Borneo

Widely accepted plate tectonic models suggest that an inactive subduction zone lies along the north-west continental margin of Sabah. In contrast, interpretation of reflection seismic data acquired by BGR shows an autochthonous continental terrane comprising an Oligocene to Early Miocene carbonate platform being progressively overthrust by an allochthonous rock complex. Progressive compression resulted in the development of four structural zones: Imbricated thrust sheets (Zone III); two thrust sheet systems one on top of the other (Zone IV); a complex zone with multiphase deformation (Zone V); and piercement ridges (Zone VI).

---

Zusammenfassung Nach herkömmlichen plattentektonischen Vorstellungen soll eine inaktive Subduktionszone am nordwestlichen Kontinentalrand von Sabah liegen. Reflexionsseismische Meßdaten der BGR zeigen jedoch, daß hier autochthone kontinentale Kruste mit einer oligozänen-frühmiozänen Karbonatplattform progressiv von einem allochthonen Gesteinsverband überschoben wird. Fortschreitender Zusammenschub seit dem frühen Miozän führte zur Anlage von vier Deformationszonen: Tekonische Schuppen (Zone III); zwei übereinander geschobene Verschuppungssysteme (Zone IV); Gürtel mit mehrphasiger Deformation (Zone V) und Durchspießungsstrukturen (Zone VI).

---

Résumé Les modèles géodynamiques que l'on admet habituellement comportent une zone de subduction inactive le long de la marge continentale nord-occidentale de Sabah. Toutefois, des mesures de sismique-réflexion exécutées par le BGR font apparaître qu'à cet endroit, une croûte continentale autochtone, comportant une plateforme carbonatée oligocène à éomiocène, est chevauchée progressivement par un complexe allochtone. La compression, qui s'est manifestée progressivement depuis le Miocène inférieur, a engendré quatre zones structurales: un ensemble d'écailles tectoniques (zone III); deux systèmes de lames tectoniques charriés l'un sur l'autre (zone IV); une zone complexe à déformation multiphasée (zone V); des structures d'extrusion tectonique (zone VI).

---

, - Sabah'a. , - . 4-? : ( 3), ( 4) ( 5) ( 6).

     

Kriging of water levels in the Souss aquifer,Morocco

Universal kriging is applied to water table data from the Souss aquifer in central Morocco. The procedure accounts for the spatial variability of the phenomenon to be mapped. With the use of measured elevations of the water table, an experimental variogram is constructed that characterizes the spatial variability of the measured water levels. Spherical and Gaussian variogram models are alternatively used to fit the experimental variogram. The models are used to develop contour maps of water table elevations and corresponding estimation variances. The estimation variances express the reliability of the kriged water table elevation maps. Universal kriging also provides a contour map of the expected elevation of the water table (drift). The differences between the expected and measured water table elevations are called residuals from the drift. Residuals from the drift are compared with residuals obtained by more traditional least-squares analysis.     

Textural attributes, mineralogy and provenance of sand dune fields in the greater Al Ain area, United Arab Emirates

Sand dunes and interdune sediments around Al Ain city have markedly high carbonate contents which increase towards Jabal Hafit mountain and the Arabian Gulf coast. The dunes are composed predominantly of well-sorted fine sands, consisting of unstrained quartz and carbonate grains together with minor proportions of chert and feldspars. Scanning electron microscope (SEM) examination reveals that quartz grains display various mechanically- and chemically-formed surface textures. The heavy minerals are dominated by opaques and pyroxenes with minor tourmaline, garnet, rutile, epidote, monazite, zircon, hornblende and staurolite.Interdune sediments consist of fine and very fine, poorly- to extremely poorly-sorted sands together with small concentrations of gravel, silt and clay. The light sand fractions compositionally resemble those of dunes but contain, in addition, gypsum, anhydrite, halite and celestite. Percentages of pyroxenes are higher whereas those of zircon, tourmaline and rutile are lower than in dunes. X-ray diffractometry reveals that the clay fractions consist solely of palygorskite. Generally, interdune sediments are much less mature texturally and mineralogically than dune sands; the maturity of both types of sediments decreases toward the NE of the study area.Sand dunes in the various districts of the greater Al Ain area are genetically related. Also, there is a partial genetic relationship between the dunes and interdune sediments; both are mainly multicyclic. Their major parts were brought mainly by the dominant north-west (El Shamal) winds from older dune fields in other localities in U.A.E., Qatar and El-Rub El-Khali. Local contributions to the dune fields from Jabal Hafit mountain, the Oman Mountains and the calcareous coast of the Arabian Gulf were, in cases, significant. Also, authigenesis by groundwater under highly evaporitic conditions played a major role in the formation of interdune sediments through the genesis of the clay and some nonclay minerals.     

A crustal suture and lineament in North Africa

A possible suture between an old craton in West Africa and the Arabian—Nubian shield is marked by a persistent zone of Phanerozoic weakness. This zone extends between the Nile and Niger deltas and passes through the Qattara embayment, along the Bahariya fault, through the Kufra basin, between the Tibesti and Jabal al Uwaynat massifs, through the Bahr el Ghazal and Lake Chad areas, and along the Benoue trough.