车装全液压钻机桅杆模态分析及拓扑优化

车装全液压钻机具有自动化程度高、工艺适用范围广、机动性好及施工效率高等优点,因此被广泛应用于煤层气抽采井、水井等钻井施工。桅杆作为钻机的重要构件,支撑着动力头的回转钻进工作,桅杆工作振动的稳定性对钻机工作的可靠性具有十分重要的影响。通过对桅杆进行模态分析,明确了桅杆的固有频率和模态振型,结果表明桅杆可能发生共振现象;通过对桅杆进行拓扑优化分析,并且根据桅杆的实际功能,得到优化模型,静力分析和模态分析结果均表明优化效果显著,满足结构强度要求且避免了共振的发生。桅杆的有限元分析,为桅杆的结构设计提供了理论支撑,同时提供了一种现代机械结构设计方法,具有一定的参考意义。     

深部地热能开发保温管技术研究现状及发展趋势

地热能是一种清洁的可再生能源,用地热能替代高碳能源是减少碳排放的有效途径之一。井下保温管技术是影响地热能开采效率的关键技术之一。本文从保温管的结构、材料、保温材料及制作工艺方面介绍了井下保温管的发展研究现状,指出纳米保温材料与真空油管的融合将是未来的发展趋势,真空纳米保温管是用于深部地热能开采的首选,同时也指出了真空纳米保温管的基础结构因素对保温性能的影响机制是研究的重点,为优化保温管的制作工艺、降本增效提供参考。     

基于单三轴试验与直剪试验的层状软岩模拟

为探究模型试验中层状软岩模拟方法,依托九绵高速层状软岩隧道现场取样的室内试验结果,多次试验确定重晶石粉、石英砂、石膏粉、滑石粉和水的最优配比以模拟软岩基体,采用带孔薄膜模拟层理弱面的黏结作用,并通过直剪试验确定孔隙率,最后对不同层理角度与层理厚度的试样开展直剪与单、三轴试验以反映各向异性情况。结果表明：软岩基体模拟最优配比为0.55:0.15:0.07:0.06:0.17,重晶石粉对强度及破坏变形起决定作用,含量过低易压溃,含量过高产生上下贯通裂缝;采用30%孔洞率的薄膜模拟层理效果最佳;土样强度随层角呈U形变化,层厚减小（不小于2 cm）,强度减小。直剪试验中,45º层理剪切面朝层理方向倾斜,90º层理导致剪切面上下产生裂缝与碎裂,单三轴结果中,0º层理会产生小角度倾斜裂缝,45º层理产生垂直层理面的斜裂缝及二次破裂,90º层理产生顺层理的竖向劈裂;与现场结果对照后确定最优层厚为 3 cm,对层角与层厚的直剪与单三轴试验结果整体一致,揭示土样孔隙压密闭合−弹性−塑性胀裂破坏−徐变的过程。     

准噶尔盆地西北缘三叠系地层格架的建立——来自岩性、地震、测井及地化方面的证据

准噶尔盆地西北缘三叠系一直是我国重要的油气攻关层位,然而其地层发育情况却长期存在争议,尤其是精细层位划分以及内部是否存在不整合界面的问题。本次研究结合了前人研究成果、岩性、测井、地震资料,并以野外露头研究为基础,通过对深底沟—大侏罗沟、花园沟、黑油山沟、吐孜沟、水库沟5条野外剖面的考察,识别出各类标志层以及J/T、T/C、T3/T2、T2k2/T2k1、S6/S7界线,认为三叠系内部并不缺失S2、S3(砂组,位于T2k2),并可区分出此二层位,随即建立起多个野外剖面的时空对应关系;此外,本次研究还通过不同岩性岩石测井响应特征将下三叠统划分为3段6砂组,将上三叠统划分为3段7砂组,将中三叠统则更细划分为2段7砂组14小层,并通过元素地层学方法对层位进行了局部检验。     

Comparison of Liquid Water Content Retrievals for Airborne Millimeter-Wave Radar with Different Particle Parameter Schemes

In the application of the physical iterative method to retrieve millimeter-wave radar liquid water content(LWC) and liquid water path(LWP), particle parameter scheme is the main factor affecting retrieval performance. In this paper, synchronous measurements of an airborne millimeter-wave radar and a hot-wire probe in stratus cloud are used to compare the LWC retrievals of the oceanic and continental particle parameter scheme with diameter less than 50μm and the particle parameter scheme with diameter less than 500μm and 1500μm(scheme 1, scheme 2, scheme 3, and scheme4, respectively). The results show that the particle parameter scheme needs to be selected according to the reflectivity factor when using the physical iterative method to retrieve the LWC and LWP. When the reflectivity factor is less than-30 d BZ, the retrieval error of scheme 1 is the minimum. When the reflectivity factor is greater than-30 d BZ, the retrieval error of scheme 4 is the minimum. Based on the reflectance factor value, the LWP retrievals of scheme 4 are closer to the measurements, the average relative bias is 5.2%, and the minimum relative bias is 4.4 %. Compared with other schemes,scheme 4 seems to be more useful for the LWC and LWP retrieval of stratus cloud in China.     

台风登陆衰减后造成降水加强的概况

对1965-2008年101例登陆台风衰减后3d内仍存在较强降水的天气过程,运用客观分离方法及其改进方案,分离提取了台风降水(Tropical Cyclone Precipitation;TCP),结果表明:即使登陆台风衰减为热带低压或停编后,因台风系统的存在而产生高强度降水是一种普遍现象,仍旧是预报服务中需要高度关注的问题.采用气候趋势系数和功率谱等方法得到TCP及台风的气候特征:台风衰减点的位置分布具有很强的区域性,与南岭、武夷山脉的走势大致吻合;台风衰减后降水并非单纯性减少,随着时间的推移,空间分布具有向北、向西扩散的特点,特别是中纬度地区的江汉一江淮一带,仍然是防灾减灾的重点.对于衰减后降水反而加强的台风,防御重点可以有针对性地对登陆华南类和登陆华东类两类路径的台风展开.     

林州市：阳光操作 整合铁矿资源

今年以来,林州市采取了切实可行的措施,超前运作,严格标准,积极推进铁矿矿山企业整合工作,截至目前,全市拟整合的12组共36家铁矿企业,有10组26家铁矿企业已经完成或基本完成整合任务,得到了省国土资源厅、安阳市国土资源部门领导的一致肯定。林州市在工作中重点把握好两条原则:一是所有参与整合的铁矿企业以组为单位,只能合并为一家,也就是只能有一个经营主体,一个法人代表。二是合并后的企业必须按新矿区范围,请有资质的设计单位重新做开发利用方案,并按新的开发利用方案组织施工。同时,要求各乡镇对每一家矿山企业做到政策公平,机遇平等,…     

Genetic study of Kelp “901” strain

Based on DNA extraction and optimization of random amplified reaction (RAPD) to the gametophytes and sporophytes of Kelp “901” strain, genetic study on variation was conducted to its parents and offsprings of F6, F7,Fs, and F9 generation. RAPD results have shown that among 30 selected primers for gametophytes, 297 loci ranging from 200 to 3 000 bp were obtained in the average of 9,9 loci for each primer, This indicated a high polymorphic rate with RAPD detection. UPGMA (unweighted pair-group method arithmetic average) analysis showed that each male and female gametophyte of a generation could be clustered into one pair separately. The genetic distances of the Kelp 901 generation were 0.321 2-0.476 7, and the maximum was between F7 and Fs (0.476 7). Identity analysis showed that F6 generation was more close to the female parent (0.659 3), and F7 generation was more close to the male parent (0.5788). To the sporophytes study in 24 selected primers for RAPD amplification, 191 loci ranging from 230-2 800 bp were obtained, in the average to each primer of 8.0 loci. The heterozygosity to six populations were male parent (0.223 9),female parent (0.107 2), F6 (0.216 4), F7 (0.228 6), F8 (0.229 6) and F9 (0.317 2). The nearest genetic distance was 0.083 5 (Fs, F9). Total heterozygosity (HT) ofF6, F7, F8 and F9 generations was 0.318 6, the average heterozygosity (Hs) for F6,F7, F8 and F9 generations was 0.248 0, and deduced coefficient of population differentiation (Gst) was 22.2%. Six sequence characterized amplified regions (SCAR) were preliminary screened through RAPD analysis. It needed to be verified in detail as they are significant for molecular marker assistance in breeding and selecting Laminaria.     

天堂西藏

美丽富饶的西藏自治区位于祖国西南边陲，地处青藏高原西南部，有“世界屋脊”之称。全区90％为藏族，其余有汉及门巴、珞巴、蒙古等民族。     

9069244型轴承的修复

9069244型轴承是北京800型钻机转盘的关键零件,使用中常发生内圈断裂、珠架磨损变形等现象.有时一套新的轴承按上,用不到两、三个月就坏.拆旧换新,这样换下的旧轴承扔在旧料堆就成了废料,另一方面,有时因买不到轴承而影响了生产.