Evaluation of the bond strength of different bonding agents to porcelain and metal alloy

This study was carried out with the purpose of testing the bond strength of different bonding agents bonded to different substrates.Substrates consisted of cylindrical specimens of three different materials: porcelain, metal, and a porcelain–metal combination. Specimens were all 10 mm in diameter and 4 mm thick. Surfaces to be bonded were air-abraded with Al₂O₃ and cleaned ultrasonically in distilled water for 10 min. After the preparation of the surface was complete, three different bonding agents were applied to the central region of the substrates. Composite resin of a 3.5 mm diameter and 2 mm thick was applied. All specimens were thermocycled between 5 and 55 °C for 200 cycles with a 30-s dwell time. After thermocycling, specimens were stored at 37 °C in distilled water for an additional 7 days before being subjected to a shear load. Shear testing was conducted Hounsfield test machine.The univariate analysis of variance and the Duncan multiple comparison test were used for statistical assessment. It was found that both type of bonding agents and of substrate led to statistically significant differences in bond strength (p<0.01).It was found that the highest bond strength was produced by Clearfil and on pure alloy substrate (33.36 MPa) and the lowest bond strength in Single Bond and porcelain–alloy substrate (4.25 MPa).     

The Making of Early Republican Ankara

Zeynep Kezer outlines the ascendancy and development of Ankara from an obscure, central Anatolian town into a capital city that was to become the focus of the new nation state. Informed by German architectural and technological expertise, it was executed to rigorous Modernist planning principles and aesthetics, and came to represent in urban form the polarisation of pre-republican and republican Turkey. Copyright © 2010 John Wiley & Sons, Ltd.     

MCM-41 supported PdNi catalysts for dry reforming of methane

A series of bimetallic PdNi catalysts supported on mesoporous MCM-41 with different Ni content (Ni/Si ratio of 0.2–0.4) was synthesized. The effect of Pd addition to Ni-containing catalysts as well as the effect of the Ni content on the surface and catalytic properties of the catalysts was studied. The samples were characterized using various techniques, such as energy-dispersive X-ray spectroscopy, N₂ adsorption–desorption isotherms, X-ray diffraction, thermogravimetric and differential analyses, X-ray photoelectron spectroscopy, high resolution transmission electron microscopy and temperature-programmed reduction. Reforming of methane with carbon dioxide was used as a test reaction. The results indicated that the addition of a small amount of Pd (0.5%) to Ni-containing catalysts leads to formation of small nano-sized, easy reducible NiO particles. Agglomeration of NiO as well as of metallic nickel phase over PdNi samples increased with increasing the Ni content. Formation of filamentous carbon over surface of spent monometallic Ni and bimetallic PdNi catalyst was observed. In spite of filamentous carbon deposition, the catalytic activity and stability of bimetallic PdNi catalysts are higher than those of monometallic Ni one. Within bimetallic system, the PdNi catalyst with Ni/Si ratio of 0.3 revealed the best performance and stability caused by presence of small nickel particles well dispersed on the catalyst surface.     

Determination of the optimum conditions in the removal of Bomaplex Red CR-L dye from the textile wastewater using O3, H2O2, HCO3- and PAC

Bomaplex Red CR-L textile dye was used in the experimental studies. Taguchi method was applied to determine optimum conditions in the removal of dye from synthetic textile wastewater. After the parameters were determined to remove Bomaplex Red CR-L dye from synthetic textile wastewater, the experimental studies were realized. The chosen experimental parameters and their ranges: HCO3- (mM), 0-39; temperature (degrees C), 18-70; ozone-air flow rate (l min-1), 5-15; the dye concentration (ppm), 200-600; particulate activated carbon (PAC) (g), 0-1.5; H2O2 (mM), 0-0056; pH, 3-12; and treatment time (min), 10-30, respectively. An orthogonal array L18 (2(1)x3(7)) for experimental plan and the smaller the better performance statistics formula were selected to define optimum conditions. The optimum conditions were found to be as follows: HCO3- (mM), 0; temperature (degrees C), 70; ozone-air flow rate (l min-1), 10; the dye concentration (ppm), 200; particulate activated carbon (PAC) (g), 1; H2O2 (mM), 0.056; pH, 12; and time (min), 20. Under these optimum conditions, it was determined that the Bomaplex Red CR-L removal efficiency from textile wastewater was 99%.     

Potential Modulated Attenuated Total Reflectance Spectroscopy of Prussian Blue Films on ITO

Potential modulated attenuated total reflectance (PM-ATR) spectroscopy has been employed to study charge transfer processes in Prussian blue (PB) films deposited on indium tin oxide (ITO) electrodes. PM-ATR is a planar waveguide-based spectroelectrochemical technique in which the optical response of an electroactive film is measured as a function of applied potential and modulation frequency. The multiple internal reflection geometry of PM-ATR provides a significant sensitivity advantage over the single external reflectance geometry that has been employed in most prior electroreflectance studies. The apparent electron transfer rate of PB on ITO obtained using PM-ATR was compared to that obtained with conventional cyclic voltammetry; the respective rates, 0.33 ± 0.15 s⁻¹ (n = 3) and 0.71 ± 0.37 s⁻¹ (n = 10), are in good agreement.     

A framework for assessing economic and environmental benefits from transmission line rehabilitation investments

The analytical challenges in the evaluation of the impacts of transmission line investments have vexed practitioners and energy regulators. This study provides a compact analytical framework to improve the accuracy and predictability of such impacts from transmission line rehabilitation investments. The proposed approach is suitable for the evaluation of projects that are implemented in a broken electricity network. In such cases, the demand for electricity is deterred and the supply of the electricity is unreliable.