Simple and comprehensive two-dimensional reversed-phase HPLC using monolithic silica columns

Simple and comprehensive two-dimensional (2D)-HPLC was studied in a reversed-phase mode using monolithic silica columns for second-dimension (2nd-D) separation. Every fraction from the first column, 15 cm long (4.6-mm i.d.), packed with fluoroalkylsilyl-bonded (FR) silica particles, was subjected to the separation in the 2nd-D using one or two octadecylsilylated (C(18)) monolithic silica columns (4.6-mm i.d., 3 cm). Monolithic silica columns in the 2nd-D were eluted at a flow rate of up to 10 mL/min with separation time of 30 s that meets the fractionation every 15-30 s at the first dimension (1st-D) operated at a flow rate of 0.4-0.8 mL/min. Three cases were studied. (1) In the simplest scheme of 2D-HPLC, effluent of the 1st-D was directly loaded into an injector loop of 2nd-D HPLC for 28 s, and 2 s was allowed for injection. (2) Two six-port valves each having a sample loop were used to hold the effluent of the 1st-D alternately for 30 s for one 2nd-D column to effect comprehensive 2D-HPLC without the loss of 1st-D effluent. (3) Two monolithic silica columns were used for 2nd-D by using a switching valve and two sets of 2nd-D chromatographs separating each fraction of the 1st-D effluent with the two 2nd-D columns alternately. In this case, two columns of the same stationary phase (C(18)) or different phases, C(18) and (pentabromobenzyloxy)propylsilyl-bonded (PBB), could be employed at the 2nd-D, although the latter needed two complementary runs. The systems produced peak capacity of approximately 1000 in approximately 60 min in cases 1 and 2 and in approximately 30 min in case 3. The three stationary phases, FR, C(18), and PBB, showed widely different selectivity from each other, making 2D separations possible. The simple and comprehensive 2D-HPLC utilizes the stability and high efficiency at high linear velocities of monolithic silica columns.     

Hiding an image with a light-scattering medium and use of a contrast-discrimination method for readout

Hiding image data with a material such as a light-scattering medium is useful as an initial stage of data protection, because the hidden image can be detected only by observation with a specific technique. A light-scattering medium is used to hide the image data, and a low-temporal-coherence interferometer performs the readout processing. A new readout method for detecting pixel values of the image is proposed to overcome spatial variation of the light intensity and distortion of the interference fringes. The introduction of spatial coding further improves the performance by overcoming spatial variations of the light-scattering medium and variations in the reflectance of given pixels.     

Ultraviolet-visible and surface-enhanced Raman scattering spectroscopy studies on self-assembled metalloporphyrin films on organic monolayer-modified ultra-thin silver substrates

A self-assembled monolayer (SAM) film of 5,10,15,20-tetra-(para-chlorophenyl)-porphyrin terbium (or lutetium) hydroxy compound (TbOH/LuOH) fabricated on a silver substrate premodified with a SAM of 4-mercaptopyridine (PySH) was studied by ultraviolet-visible (UV-Vis) spectroscopy and surface-enhanced Raman scattering (SERS) spectroscopy. PySH can modify the substrate and deliver its pyridyl group pointing out from the silver surface. Thus, we can investigate the effects of the central metals of the metalloporphyrins in the formation of the composite films. For the TbOH-PySH composite film, a new absorption band arising from TbOH appears at 425 nm, and a band at 512 nm due to the PySH-modified silver substrate shifts to a longer wavelength (538 nm). The results suggest that TbOH is successfully assembled on the top of PySH-modified silver film and that there is an interaction between TbOH and PySH in the film. The frequency shifts and relative intensity changes of bands due to PySH in the SERS spectra imply the coordination of the pyridyl group on Tb in the SAM. As for the LuOH-PySH composite film, its SERS spectrum shows bands arising from both the LuOH and PySH moieties, indicating that LuOH is assembled on the PySH-modified silver film. Furthermore, a band at 1221 cm(-1) due to the in-plane C-H bending mode of PySH disappears, implying that the pyridyl moiety of PySH becomes more parallel to the silver surface upon the formation of the LuOH-PySH composite film. Additionally, an absorption band at 515 nm shifts to a longer wavelength (541 nm) and becomes broad upon the formation of the composite film, suggesting an interaction between LuOH and PySH in the film. By comparing the spectral changes between the two self-assembled composite films, we find that the central metal is crucial in the formation of the composite films. The structure and orientation of the composite films depend on the central metal of the metalloporphyrin compounds.     

Part I: surface-enhanced Raman spectroscopy investigation of amino acids and their homodipeptides adsorbed on colloidal silver

Surface-enhanced Raman scattering spectra (SERS) were measured for various amino acids: L-methionine (Met), L-cysteine (Cys), Lglycine (Gly), L-leucine (Leu), L-phenylalanine (Phe), and L-proline (Pro) and their homodipeptides (Met-Met, Cys-Cys, Gly-Gly, LeuLeu, Phe-Phe, and Pro-Pro) in silver colloidal solutions. The geometry and orientation of the amino acids or dipeptides on the silver surface, and their specific interaction with the surface, were deducted by detailed spectral analysis of the SERS spectra. This analysis has allowed us to propose the particular surface geometry of amino acids or dipeptides and also implied that C-C bonds were almost parallel to the surface, as evidenced by the absence of marker bands in the skeletal C-C stretching region of the spectra. Additionally, using "time-dependent" SERS measurements we solved an existing controversy regarding the binding specificity of Gly-Gly on the silver surface.     

Prediction of ethylene content in melt-state random and block polypropylene by near-infrared spectroscopy and chemometrics: comparison of a new calibration transfer method with a slope/bias correction method

This paper reports the prediction of the ethylene content (C2 content) in random polypropylene (RPP) and block polypropylene (BPP) in the melt state by near-infrared (NIR) spectroscopy and chemometrics. NIR spectra of RPP and BPP in the melt states were measured by a Fourier transform near-infrared (FT-NIR) on-line monitoring system. The NIR spectra of RPP and BPP were compared. Partial least-squares (PLS) regression calibration models predicting the ethylene (C2) content that were developed by using each RPP or BPP spectra set separately yielded good results (SECV (standard error of cross validation): RPP, 0.16%; BPP, 0.31%; correlation coefficient: RPP, 0.998; BPP, 0.996). We also built a common PLS calibration model by using both the RPP and the BPP spectra set. The results showed that the common calibration model has larger SECV values than the models based on the RPP or the BPP spectra sets individually and is not practical for the prediction of the C2 content. We further investigated whether a calibration model developed by using the BPP spectra set can predict the C2 contents in the RPP sample set. If this is possible, it can save a significant amount of work and cost. The results showed that the use of the BPP model for the RPP sample set is difficult, and vice versa, because there are some differences in the molar absorption coefficients between the RPP and BPP spectra. To solve this problem, a transfer method from one sample spectra (BPP) set to the other spectra (RPP) set was studied. A difference spectrum between an RPP spectrum and a BPP spectrum was used to transfer from the BPP calibration set to the RPP calibration set. The prediction result (SEP (standard error of prediction), 0.23%, correlation coefficient, 0.994) of RPP samples by the transferred calibration set and model showed that it is possible to transfer from the BPP calibration set to the RPP calibration set. We also studied the transfer from the RPP calibration set (the range of C2 content: 0-4.3%) to the BPP calibration set. The prediction result of C2 content (the range of C2 contents: 0-7.7%) in BPP by use of the calibration model based on the transferred BPP spectra from the RPP spectra showed that the transfer method is only effective for the interpolation of the C2 content range by the nonlinear change in the peak intensities with the C2 content.     

The crystal growth and thermoelectric properties of chromium disilicide

Single crystals of chromium disilicide about 8 mm in diameter and 35 mm long were grown using the floating zone technique. Measurements of electrical resistivity , Hall coefficient R and thermoelectric power were carried out in the temperature range from 85 to 1100 K. The values of and showed the anisotropy over the temperature range studied. The ratios parallel and perpendicular to the c-axis were / =1.9 and /=1.7 respectively, at room temperature. It was found to be a degenerate semiconductor having the hole concentration of 6.3×10²⁰ cm^–3 below 600 K. The effective masses of holes parallel and perpendicular to the c-axis determined from the thermoelectric power and the hole concentration near room temperature were estimated to be five and three times as large as a free electron mass, respectively. The calculation on the values of and was made using those effective masses. These values showed good agreement with the observed values in the temperature range from 150 to 1100 K.     

Effect of lipopolysaccharide on indices of peripheral and hepatic metabolism in lactating cows

Four multiparous lactating cows (175 to 220 d in milk [DIM]) were used in a 4 x 4 Latin square design to assess the effects of four doses (0.0, 0.5, 1.0, and 1.5 microg/kg of body weight) of lipopolysaccharide (LPS; Escherichia coli 0111:B4) on performance and plasma metabolite and hormone concentrations. In addition, effects of immune activation on in vitro hepatic metabolic capacity were evaluated in 12 multiparous lactating cows (150 to 220 DIM) infused with 0 (n = 6), 1.0 (n = 4) or 2.0 (n = 2) microg of LPS/kg. Milk production and DMI decreased linearly with LPS dose for 24 h after LPS infusion. Overall mean plasma tumor necrosis factor-alpha, insulin, glucagon, and cortisol concentrations increased linearly with LPS dose, and plasma beta-hydroxybutyrate decreased linearly by dose after LPS infusion. Infusion of LPS decreased the insulin:glucagon molar ratio, but did not affect plasma concentrations of growth hormone, insulin-like growth factor-1, leptin, or L-(+)-lactate. Plasma concentrations of glucose tended to increase initially and subsequently decrease, and there was a quadratic tendency for increased plasma nonesterified fatty acid concentrations after LPS administration. In vitro hepatic capacity for conversion of [1-(14)C]L-(+)-lactate and [1-(14)C]palmitate, but not [1-(14)C]propionate or [1-(14)C]L-alanine, to CO2 increased after LPS administration. Hepatic capacity to convert [1-(14)C]propionate to glucose tended to increase, but neither esterification nor the conversion of palmitate to acid soluble products was altered by LPS. The LPS infusion resulted in significant changes of endocrine mediators responsible for regulation of energy metabolism of lactating cows and tended to alter subsequent in vitro hepatic metabolic capacity.     

Reduction of droplet of tantalum oxide using double slit in pulsed laser deposition

We developed a double slit method in order to reduce droplets that were a problem in pulsed laser deposition (PLD) of tantalum oxide. The tantalum oxide films were deposited using KrF excimer laser ablation of a Ta target in 5 mass% O₃ at a pressure of 10 Pa. Stoichiometric and dense films with few droplets were obtained at a pressure of 10 Pa. Without double slit, as the laser pulses increased, the number of droplets containing rich metal on the film gets increased and its size became larger, and the surface morphology of the target also became more and more rugged. It was found that the number of droplet could be controlled by changing the initial roughness of the target. The number of droplets with a diameter size of under 1 μm was decreased to 1/10 of their sizes. Droplets larger than 3 μm, which mostly affect the corrosion resistance and hardly increase even beyond the laser pulses of 100 000. It is evident from this study that the double slit is a very effective method for reducing the droplets, which are otherwise a problem often seen in film production by PLD.     

Discrimination of psychoactive fungi (commonly called "magic mushrooms") based on the DNA sequence of the internal transcribed spacer region

'Magic mushrooms' (MMs) are psychoactive fungi containing the hallucinogenic compounds, psilocin (1) and psilocybin (2). Since June 6, 2002, these fungi have been regulated by the Narcotics and Psychotropics Control Law in Japan. Because there are many kinds of MMs and they are sold even as dry powders in local markets, it is very difficult to identify the original species of the MMs by morphological observation. Therefore, we investigated the internal transcribed spacer (ITS) region in the ribosomal RNA gene of MMs obtained in Japanese markets to classify them by a genetic approach. Based on the size and nucleotide sequence of the ITS region amplified by PCR, tested MMs were classified into 6 groups. Furthermore, a comparison of the DNA sequences of the MMs with those of authentic samples or with those found in the databases (GenBank, EMBL and DDBJ) made it possible to identify the species of tested MMs. Analysis by LC revealed that psilocin (1) was contained at the highest level in Panaeolus cyanescens among the MMs, but was absent in the Amanita species.