Study of static cushioning properties: Automated data input and reliability test of static cushioning properties

A computer-controlled compression testing machine is used to compile a database of the static cushioning properties of package cushioning materials. Through research into automated data input procedures, so far not developed, a direct transfer program (ZABCON) has been devised, which allows direct access to the disk in which compression test data are stored. Elimination of manual data input has led to simplified and easy construction of a database, and the applied laboratory tests, such as that for determining the relationship between static cushioning properties and compression rate, can be performed quite readily. Also in this report, the application of the static cushioning characteristics of foamed polystyrene in the cushioning package design of dummy goods and the evaluation of its reliability by drop testing are discussed.     

Anodic chlorination of aniline in N,N-dimethyl-formamide and N,N-dimethylacetamide

A pertinent electrochemical synthesis of 2,4,6-trichloroaniline (TCA) in anhydrous media was studied. The influence of the solvent, the chlorinating reagent, the electricity passed and the nature of the anode material, were investigated. TCA was produced in electrolytic solutions whose solvents were amides with strong nucleophilicity as N,N-dimethylformamide (DMF) and N,N-dimethylacetoamide (DMAc), and was obtained selectively by the controlled potential electrolysis of aniline in the solution containing LiCl. The definition of the experimental conditions corresponding to an optimum and selective electrolysis of TCA was described.     

On-line recognition of hand-written characters utilizing positional and stroke vector sequences

An on-line recognition method for hand-written characters utilizing stroke vector sequences and a positional vector sequence has been developed. The number of target characters is about 2000, and fairly good recognition scores have been attained. Our scheme uses the number of strokes as the primary parameter. We employ three types of recognition strategy depending on the number of strokes. The general stroke vector sequence method, devised to analyze the shape, can represent both skeleton and local characteristics by a small amount of information; and the restricted dynamic programming method is effective to determine the shape of a stroke. The similarity of two shapes and the complexity of a stroke have been introduced to reduce the dictionary size and the processing time, respectively.     

808-nm diode-pumped continuous-wave Tm:GdVO4 laser at room temperature

A high-quality gadolinium vanadate (GdVO4) crystal with 7-at. % thulium as the starting material was grown by the Czochralski technique. The measured absorption spectra exhibited sufficient absorption coefficients for laser diodes (LDs) for neodymium laser pumping: 6.0 cm(-1) for pi polarization and 6.2 cm(-1) for sigma polarization at 808 nm. Laser oscillation was carried out with single-stripe 808-nm LDs in an end-pumping configuration. A slope efficiency of 28% and a threshold of 750 mW were exhibited with respect to the absorbed pump power. An output power of 420 mW was achieved at an absorbed power of 2.4 W. It was demonstrated that Tm:GdVO4 is a useful material for 2-microm lasers, particularly in a compact LD-pumped system.     

Oxygen Reduction Electrode Properties of Manganese Oxide Nanosheet-Based Materials

Two types of oxide nanosheet-based materials, H₃O⁺-form regularly stacked manganese oxide nanosheets (H₃O⁺-RG(Mn)) and H₃O⁺-form randomly restacked manganese oxide nanosheets (H₃O⁺-RE(Mn)) were synthesized by soft chemical methods, and their oxygen reduction reaction (ORR) activities were examined by cyclic voltammetry (CV) and semi-steady-state voltammetry (SSV) with a rotating ring-disc electrode at 70 °C in 0.1 M KOH. Both samples showed high onset potentials (E _on) of the ORR current and high efficiencies (Eff ₄) of the 4-electron reduction of oxygen, and E _on and Eff ₄ values were improved by electrochemical oxidation up to 1.2 V (vs. reversible hydrogen electrode) in the CV measurement prior to the SSV measurement. As a result, the nanosheet-based samples exhibited higher ORR activities than the starting materials, K⁺-form layered manganese oxide K_0.5MnO₂ (K⁺-RG(Mn)) and Mn₂O₃, and a well-known ORR catalyst, MnO₂. The H₃O⁺-RE(Mn) sample electrochemically oxidized up to 1.2 V showed the highest ORR activity, E _on = 0.97 V and Eff ₄ = 99%, which were comparable to those of a conventional 20 mass% Pt/C catalyst. The comparison of their ORR activities, BET surface areas and X-ray photoelectron spectra suggests that the enhancement of the ORR activity is attributed to an increase in the numbers of the ORR active sites and a large amount of H₂O in the interlayers and on the surface of the nanosheets because of rapid of H₂O-supply enough for ORR in alkaline solution.     

Grain refinement and superplasticity of pipes processed by high-pressure sliding

ABSTRACT

The high-pressure sliding (HPS) process was applied for grain refinement of a pipe form of an Al-3wt%Mg-0.2wt%Sc alloy by developing two types of straining techniques (called in this study anvil sliding and mandrel sliding). To achieve a homogeneous microstructure throughout the cross-section of the pipe, the sample is rotated around the longitudinal axis every after sliding operation by introducing multi-pass technique, named multi-pass HPS (MP-HPS) as developed earlier for rods. The MP-HPS-processed sample shows ultrafine-grained structures with an average grain size of ～260 and ～300?nm after the HPS processing using anvil sliding and mandrel sliding. The samples also exhibit superplasticity with total elongations well more than 400%, respectively. A finite-element method is used to simulate the evolution of strain in the HPS processing and demonstrates that the simulation well represents the experimental results.     

Alumina–carbon composite fibers from poly[(acyloxy)aloxane]s

The alumina–carbon composite fibers were obtained from poly[(acyloxy)aloxane] (PAA) with 3-ethoxypropanoic (EPA) and m-anisic acids (m-AA) legands. This preceramic polymer can be dissolved in p-xylene-methanol-EPA mixed solvent, and the concentrated solution exhibited an excellent spinnability. During the pyrolysis and sintering processes, aliphatic carboxylate in the side groups was easily decomposed and eliminated. The aromatic carboxylate, however, seems to be converted and migrated to a carbon domain in the alumina matrix into which aloxane repetition was converted. The fibers pyrolyzed up to 800 and 1000°C have electrical conductivities that monotonically increase with increasing temperature. The fiber pyrolyzed up to 1200°C showed the electrical conductivity in a rather complicated manner.     

Optimization of a Wolter type I mirror for a soft X-ray microscope

The demand for an X-ray microscope has received much attention because of the desire to study living cells under high resolution. A Wolter type I mirror used for soft X-ray microscope optics has a number of advantages. Although much progress has been made, it is still not easy to fabricate this mirror and satisfy the surface roughness and figure error requirements. From the mirror fabrication point of view, it is necessary to see the mirror design and the tolerance budget, especially with respect to the surface roughness and the figure errors. This paper deals with the design and optimization of a Wolter type I microscope mirror. The optimization was carried out by choosing an optimum central grazing incidence angle for which a merit function had the maximum value. The image quality of the mirror was also examined. A smaller diameter gave better image quality because of the Abbe sine condition. Finally, the figure errors for the axial and the radial directions were simulated by sinusoidal deformation waves, and the figure tolerance was obtained.     

Compact Tunable Narrowband Terahertz-Wave Source Based on Difference Frequency Generation Pumped by Dual Fiber Lasers in MgO:LiNbO<Subscript>3</Subscript>

We demonstrate a high-average-power, single longitudinal-mode, and tunable terahertz (THz)-wave source based on difference frequency generation (DFG) in a MgO:LiNbO₃ (MgO:LN) crystal. The waves for DFG are generated using a pair of Yb-doped pulsed fiber lasers with a master oscillator power fiber amplifier configuration. The average power of the THz-wave output reaches 450 μW at 1.07 THz (280 μm) at a linewidth of 7.2 GHz, and the tunability ranges from 0.35 to 1.07 THz under the pulse repetition frequency of 500 kHz. A short burn-in test of the THz wave is also carried out, and the output power stability is within ± 5% of the averaged power without any active stabilizing technique. The combination of MgO:LN-DFG and stable and robust fiber laser sources is highly promising for the development of high-average-power THz-wave sources, particularly in the high transmission sub-THz region. This approach may enable new applications of THz-wave spectroscopy in imaging and remote sensing.     

Formation of hydroxyapatite layer on bioactive Ti and Ti–6Al–4V by simple chemical technique

Bioactive coatings on cp-Ti and Ti–6Al–4V were prepared by a simple chemical technique. Specimens of cp-Ti and Ti–6Al–4V were initially immersed in a 5 M NaOH solution at 60 °C for 24 h which resulted in the formation of a porous network structure composed of Na₂Ti₅O₁₁ and TiO₂. The specimens were then immersed in a Ca-rich solution either at 60 °C or at 36.5 °C for 24 h. During this treatment Na⁺ was released and Ti–OH groups were formed. Subsequently, TiO₂ dissociated from the Ti–OH group and combined with calcium ions to form calcium titanate (CaTiO₃), which was embedded in a titania gel layer during the immersion period. The specimens were then immersed in r-SBF at 36.5 °C for 1–30 days. After immersion in r-SBF for 3 days, HAp (hydroxyapatite) spheroids began to deposit on the substrates, and within a week the surfaces were covered. The HAp spheroids were 5 μm in size with a Ca/P ratio of 1.68 which was close to bone-like apatite (1.67). The average thicknesses of HAp layer after immersion in r-SBF for 3 days, 1 week, and 2 weeks were 3.8, 5.6, and 6.4 μm, respectively. A scratch test, used to evaluate the adhesive strength of the HAp layer, showed that the HAp layer was not scraped off until the applied load reached 26 N.